A pressure gradient facilitates mass flow in the oomycete Achlya bisexualis.

We have used a single cell pressure probe and observed movement of microinjected oil droplets to investigate mass flow in the oomycete Achlya bisexualis. To facilitate these experiments, split Petri dishes that had media containing different sorbitol concentrations (and hence a different osmotic potential) on each side of the dish were inoculated with a single zoospore. An initial germ tube grew out from this and formed a mycelium that extended over both sides of the Petri dish. Hyphae growing on the 0 M sorbitol side of the dish had a mean turgor ( ± sem) of 0.53 ± 0.03 MPa (n = 13) and on the 0.3 M sorbitol side had a mean turgor ( ± sem) of 0.3 ± 0.027 MPa (n = 9). Oil droplets that had been microinjected into the hyphae moved towards the lower turgor area of the mycelia (i.e. retrograde movement when microinjected into hyphae on the 0 M sorbitol side of the split Petri dish and anterograde movement when microinjected into hyphae on the 0.3 M sorbitol side of the Petri dish). In contrast, the movement of small refractile vesicles occurred in both directions irrespective of the pressure gradient. Experiments with neutral red indicate that the dye is able to move through the mycelia from one side of a split Petri dish to the other, suggesting that there is no compartmentation. This study shows that hyphae that are part of the same mycelia can have different turgor pressures and that this pressure gradient can drive mass flow.

DNA visualization in single molecule studies carried out with optical tweezers: Covalent versus non-covalent attachment of fluorophores.

In this study, we investigated the use of the covalent attachment of fluorescent dyes to double-stranded DNA (dsDNA) stretched between particles using optical tweezers (OT) and compared the mechanical properties of the covalently-functionalized chain to that of unmodified DNA and to DNA bound to a previously uncharacterized groove-binder, SYBR-gold. Modified DNA species were obtained by covalently linking azide-functionalized organic fluorophores onto the backbone of DNA chains via the alkyne moieties of modified bases that were incorporated during PCR. These DNA molecules were then constructed into dumbbells by attaching polystyrene particles to the respective chain ends via biotin or digoxigenin handles that had been pre-attached to the PCR primers which formed the ends of the synthesized molecule. Using the optical tweezers, the DNA was stretched by separating the two optically trapped polystyrene particles. Displacements of the particles were measured in 3D using an interpolation-based normalized cross-correlation method and force-extension curves were calculated and fitted to the worm-like chain model to parameterize the mechanical properties of the DNA. Results showed that both the contour and persistence length of the covalently-modified dsDNAs were indistinguishable from that of the unmodified dsDNA, whereas SYBR-gold binding perturbed the contour length of the chain in a force-dependent manner.

Nanoscale strain-hardening of keratin fibres.

Mammalian appendages such as hair, quill and wool have a unique structure composed of a cuticle, a cortex and a medulla. The cortex, responsible for the mechanical properties of the fibers, is an assemblage of spindle-shaped keratinized cells bound together by a lipid/protein sandwich called the cell membrane complex. Each cell is itself an assembly of macrofibrils around 300 nm in diameter that are paracrystalline arrays of keratin intermediate filaments embedded in a sulfur-rich protein matrix. Each macrofibril is also attached to its neighbors by a cell membrane complex. In this study, we combined atomic force microscopy based nano-indentation with peak-force imaging to study the nanomechanical properties of macrofibrils perpendicular to their axis. For indentation depths in the 200 to 500 nm range we observed a decrease of the dynamic elastic modulus at 1 Hz with increasing depth. This yielded an estimate of 1.6GPa for the lateral modulus at 1 Hz of porcupine quill's macrofibrils. Using the same data we also estimated the dynamic elastic modulus at 1 Hz of the cell membrane complex surrounding each macrofibril, i.e., 13GPa. A similar estimate was obtained independently through elastic maps of the macrofibrils surface obtained in peak-force mode at 1 kHz. Furthermore, the macrofibrillar texture of the cortical cells was clearly identified on the elasticity maps, with the boundaries between macrofibrils being 40-50% stiffer than the macrofibrils themselves. Elasticity maps after indentation also revealed a local increase in dynamic elastic modulus over time indicative of a relaxation induced strain hardening that could be explained in term of a α-helix to ß-sheet transition within the macrofibrils.

Fascin and VASP synergistically increase the Young's modulus of actin comet tails.

Cell motility is locally achieved by the interplay between lamellipodia and filopodia at the protrusion sites. The actin cytoskeleton rearranges from a highly branched short filamentous network to well aligned elongated bundles from lamellipodia to filopodia, respectively. This process is governed predominantly by actin binding proteins, VASP and fascin, at the leading edge of migratory cells. Here we use an Arp2/3-complex dependent bead motility assay to study the effect of fascin both on its own and in the presence of VASP. The Young's modulus of phalloidin stabilized comets grown in the presence of fascin increased linearly with concentration above a 0.5 µM threshold. Inversely, the initial velocity of the comets decreased linearly with fascin concentration above the same threshold. Interestingly, VASP and fascin together increased the Young's modulus of the comets compared to those grown in the presence of only one of the two proteins. This effect was most remarkable at low concentration, below 0.5 and 0.15 µM for fascin and VASP, respectively. Our results showed that fascin and VASP work cooperatively to enhance the Young's modulus of the actin network within the comets.

The mechanical role of VASP in an Arp2/3-complex-based motility assay.

The comet motility assay, inspired by Listeria locomotion, has been used extensively as an in vitro model to study the structural and motile properties of the actin cytoskeleton. However, there are no quantitative measurements of the mechanical properties of these actin comets. In this work, we use nanoindentation based on atomic force microscopy to measure the elastic modulus of actin comets grown on  1-µm-diameter beads in an Arp2/3 (actin-related proteins 2 and 3)-complex-dependent fashion in the absence and in the presence of VASP (vasodilator-stimulated phosphoprotein). Recruitment of VASP to the bead surface had no effect on the initial velocity or morphology of the comets. Instead, we observed an improved contact of the comets with the beads and an increased elastic modulus of the comets. The VASP-mediated increase in elastic modulus was dependent on both concentration and ionic strength. In conclusion, we propose that VASP plays a mechanical role in Arp2/3-complex-dependent motility by amplifying the elastic modulus of the thus assembled actin network and, consequently, by strengthening its cohesion for persistent protrusion.