Destruxin E backbone modification effects on osteoclast Morphology: Synthesis and SAR study of N-Desmethyl and N-Methyl analogs.

The design and synthesis of N-desmethyl and N-methyl destruxin E analogs have been demonstrated. The X-ray single crystal structure of destruxin E (1a) revealed a stable three-dimensional (3D) structure, including a s-cis amide bond at the MeVal-MeAla moiety and two intramolecular hydrogen bonds between NH(ß-Ala) and OC(Ile) and between NH(Ile) and OC(ß-Ala). N-Desmethyl analogs 2a (MeAla â†’ Ala) and 2b (MeVal â†’ Val) were synthesized through macrolactonization similar to our previously reported synthesis of 1a. Conversely, for the synthesis of N-methyl analogs 2c (Ile â†’ MeIle) and 2d (ß-Ala â†’ Meß-Ala), macrolactonization did not proceed; therefore, cyclization precursors 10c and 10d were designed to maintain the intramolecular hydrogen bonds described above during their cyclization. The macrolactamization proceeded despite the presence of a less reactive N-methylamino group at the N-terminus in both cases. Analog 2a, which exhibits multiple conformers in solutions, was inactive at 50 µM, whereas analog 2b, which exhibits a conformation similar to that of 1a in solutions, exhibited morphological changes against osteoclast-like multinuclear cells at 1.6 µM. The activity of the MeIle analog 2c, which cannot take the intramolecular hydrogen bond (Ile)NH•••OC(ß-Ala) in 1a, was markedly diminished compared with that of 1a, and that of the Meß-Ala analog 2d, which cannot take the intramolecular hydrogen bond (ß-Ala)NH•••OC(Ile) in 1a, was further reduced to one-fourth of that of 2c. The overall results indicate that both the s-cis amide bond at the MeVal-MeAla moiety and two intramolecular hydrogen bonds (ß-Ala)NH•••OC(Ile) and (Ile)NH•••OC(ß-Ala) are important for constraining the conformation of the macrocyclic peptide backbone in destruxin E, thereby exhibiting its potent biological activity.

Synthesis of tertiary alkylphosphonate oligonucleotides through light-driven radical-polar crossover reactions.

Chemical modification of nucleotides can improve the metabolic stability and target specificity of oligonucleotide therapeutics, and alkylphosphonates have been employed as charge-neutral replacements for naturally-occurring phosphodiester backbones in these compounds. However, at present, the alkyl moieties that can be attached to phosphorus atoms in these compounds are limited to methyl groups or primary/secondary alkyls, and such alkylphosphonate moieties can degrade during oligonucleotide synthesis. The present work demonstrates the tertiary alkylation of the phosphorus atoms of phosphites bearing two 2'-deoxynuclosides. This process utilizes a carbocation generated via a light-driven radical-polar crossover mechanism. This protocol provides tertiary alkylphosphonate structures that are difficult to synthesize using existing methods. The conversion of these species to oligonucleotides having charge-neutral alkylphosphonate linkages through a phosphoramidite-based approach was also confirmed in this study.

Synthesis of Polycyclic Arenes Composed of Four-, Five-, Six-, and Eight-Membered Rings via an Unexpected Four-Membered Ring Formation Reaction.

The synthesis of polycyclic arenes composed of four-, five-, six-, and eight-membered rings via an unexpected four-membered ring formation reaction is reported. The carbonylation of an octalithiated tetraphenylene yielded a tricarbonylated arene containing a four-membered ring or a tetracarbonylated one, depending on the carbonyl reagents. The structures were determined by X-ray crystallography, and their electronic properties were examined by using absorption spectroscopy and cyclic voltammetry. The antiaromaticity of the four-, five-, and eight-membered rings of these compounds was studied by theoretical calculations.

Intramolecular Singlet Fission in Pentacene Oligomers via an Intermediate State.

Intramolecular singlet fission (iSF) is an efficient strategy of multiexciton generation via a singlet exciton splitting into a correlated triplet pair in one organic molecule with more than two chromophores. Propeller-shaped iptycene-linked triisopropylsilyl(TIPS)-ethynyl functionalized pentacene oligomers (pent-monomer, pent-dimer, and pent-trimer) were synthesized, and the iSF dynamics of pent-dimer and -trimer were monitored by a visible-near-IR transient absorption (TA) spectroscopy. Quantum yields of the triplet pair, ∼80%, of both estimated by near-IR TA spectral analysis are in good agreement with the results of global analysis and triplet sensitization experiments. The iSF rate of pent-trimer is slightly faster than that of pent-dimer even with one more chromophore site. The unexpectedly weak difference indicates the existence of an intermediate process to realize iSF. The intermediate process might be determined by through-bond electronic coupling of the homoconjugation bridge in the pentacene oligomers. Our results suggest the importance of the rigid bridge to the fast iSF rate and the elongated lifetime of the correlated triplet pair in pentacene oligomers.

An Electron-Deficient CpE Iridium(III) Catalyst: Synthesis, Characterization, and Application to Ether-Directed C-H Amidation.

The synthesis, characterization, and catalytic performance of an iridium(III) catalyst with an electron-deficient cyclopentadienyl ligand ([CpE IrI2 ]2 ) are reported. The [CpE IrI2 ]2 catalyst was synthesized by complexation of a precursor of the CpE ligand with [Ir(cod)OAc]2 , followed by oxidation, desilylation, and removal of the COD ligand. The electron-deficient [CpE IrI2 ]2 catalyst enabled C-H amidation reactions assisted by a weakly coordinating ether directing group. Experimental mechanistic studies and DFT calculations suggested that the high catalytic performance of [CpE IrI2 ]2 is due to its electron-deficient nature, which accelerates both C-H activation and IrV -nitrenoid formation.

Estimation of Steering and Throttle Angles of a Motorized Mobility Scooter with Inertial Measurement Units for Continuous Quantification of Driving Operation.

With the growing demand from elderly persons for alternative mobility solutions, motorized mobility scooters (MMSs) have been gaining importance as an essential assistive technology to aid independent living in local communities. The increased use of MMSs, however, has raised safety issues during driving and magnified the necessity to evaluate and improve user driving skills. This study is intended to develop a novel quantitative monitoring method for MMS driving operation using inertial measurement units (IMUs). The proposed method used coordinate transformations around the rotational axes of the steering wheel and the throttle lever to estimate the steering and throttle operating angles based on gravitational accelerations measured by IMUs. Consequently, these operating angles can be monitored simply using an IMU attached to the throttle lever. Validation experiments with a test MMS in the stationary state confirmed the consistency of the proposed coordinate transformation with the MMS's geometrical structure. The driving test also demonstrated that the operating angles were estimated correctly on various terrains and that the effects of terrain inclination were compensated using an additional IMU attached to the scooter body. This method will be applicable to the quantitative monitoring of driving behavior and act as a complementary tool for the existing skills' evaluation methods.

Ciprofloxacin salt and salt co-crystal with di-hydroxy-benzoic acids.

The crystal structure of two multi-component crystals of ciprofloxacin [systematic name: 1-cyclo-propyl-6-fluoro-4-oxo-7-(piperazin-1-yl)quinoline-3-carb--oxy-lic acid], a fluoro-quinolone anti-biotic, namely, ciprofloxacin 2,6-di-hydroxy-benzoate salt, C17H19FN3O3 +·C7H5O4 -, (I), and ciprofloxacin hydro-chloride-3,5-di-hydroxy-benzoic-water (1/1/1), C17H19FN3O3 +·Cl-·C7H6O4·H2O, (II), were determined. In (I) and (II), the ciprofloxacin cations are connected via head-to-tail N-H⋯O hydrogen bonding. Both structures show an alternating layered arrangement between ciprofloxacin and di-hydroxy-benzoic acid.

Synthesis of Cyclophenacene- and Chiral-Type Cyclophenylene-Naphthylene Belts.

We report the synthesis of a [20]cyclophenacene-type cyclophenylene-naphthylene (CPN) belt and the enantioselective synthesis of chiral-type CPN belts (up to >99 % ee) by the cationic rhodium(I)-catalyzed intramolecular [2+2+2] cycloaddition of naphthalene-embedded cyclic polyynes. The synthesis of a depth-expanded CPN belt was also attempted, but the final intramolecular [2+2+2] cycloaddition was unsuccessful. Theoretical calculations clarified that the reactivity depends on the stability of the transition state in the initial oxidative cycloaddition step which is subject to molecular strain. The cylindrical structures of these CPN belts were confirmed by X-ray crystallographic analyses. As a result of π-extension through the introduction of naphthalenes in the chiral-type CPN belts, the anisotropy dissymmetry factors of electronic circular dichroism and circularly polarized luminescence are amplified compared with the corresponding zigzag-type chiral cyclophenylene belts.

Two-step crystal-crystal phase transformation of N-salicylidene-p-aminobenzoic acid by gas-solid reaction with aqua-ammonia vapour.

Crystal-crystal phase transformation by external stimuli has attracted significant attention for application in switchable materials, which can change their structures and properties. Herein, it is revealed that N-salicylidene-p-aminobenzoic acid crystals undergo a two-step crystal-crystal phase transformation through a gas-solid reaction with aqua-ammonia vapour. The photochromic behaviour of the crystals switched from nonphotochromic to photochromic and back to nonphotochromic via a phase transformation. The two-step phase transformation and photochromic behaviour change were characterized and correlated by X-ray crystal structure analysis, UV-Vis spectroscopy, differential scanning calorimetry and scanning electron microscopy. This article is the first report to capture the stepwise structural change in the gas-solid (acid-base) reaction of ammonia with benzoic acid derivatives.

Erratum: Hydrogen-bonding patterns in 2,2-bis-(4-methyl-phen-yl)hexa-fluoro-propane pyridinium and ethyl-enedi-ammonium salt crystals. Corrigendum.

[This corrects the article DOI: 10.1107/S2056989020005575.].

Isoacenofuran: a novel quinoidal building block for efficient access to high-ordered polyacene derivatives.

Herein, a simple and practical method for generating isoacenofuran, a new π-extended quinoidal building block, was developed. A three-step protocol involving double nucleophilic additions of alkynyllithiums to acene-2,3-dicarbaldehyde, mono-oxidation, and acid-promoted cyclization enables the generation of the target molecule, which is trapped by a dienophile to produce highly condensed acenequinones. Further transformations by double nucleophilic additions of alkynyllithium to hexacenequinone, followed by reductive aromatization, produce tetraalkynylhexacenes with a remarkably higher stability than that of the previously reported substituted hexacenes.

Synthesis, Structures, and Properties of Highly Strained Cyclophenylene-Ethynylenes with Axial and Helical Chirality.

Single and double cyclophenylene-ethynylenes (CPEs) with axial and helical chirality have been synthesized by the Sonogashira cross-coupling of di- and tetraethynyl biphenyls with a U-shaped prearomatic diiodoparaphenylene followed by reductive aromatization. X-ray crystallographic analyses and DFT calculations revealed that the CPEs possess highly twisted bent structures. Bend angles on the edge of the paraphenylene units were close to the value of [5]cycloparaphenylene (CPP)-the smallest CPP to date. The double and single CPEs possessed stable chirality despite flexible biphenyl structures because of the high strain in the diethynyl-paraphenylene moiety. In both the single and double CPEs, orbital interactions along the biphenyl axis were observed by DFT calculations in LUMO and LUMO+2 of the single CPE and LUMO+1 of the double CPE, which likely cause lowering of these orbital energies. Concerning chiroptical properties: boosting of the gabs value was observed in the biphenyl-based double CPE, as well as the binaphthyl-based single CPE, compared to the biphenyl-based single CPE.

Enantioselective Synthesis of Planar Chiral Zigzag-Type Cyclophenylene Belts by Rhodium-Catalyzed Alkyne Cyclotrimerization.

Planar chiral zigzag-type [8]- and [12]cyclophenylene (CP) belts have been synthesized in good yields with high ee values of 98% and 83%, respectively, by the rhodium-catalyzed enantioselective intramolecular sequential cyclotrimerizations of the corresponding cyclic polyynes. The observed high enantioselectivity arises from the regioselective formation of a rhodacycle intermediate from an unsymmetric triyne unit. The X-ray crystal structural analysis of the racemic planar chiral zigzag-type [8]CP belt revealed that the uneven molecules mesh with each other to form a one-dimensional columnar packing structure, in which one column contains single enantiomers, giving two types of chiral columns [(S)- and (R)-form columns] arranged alternately. The ring strain of the zigzag-type [8]CP belt was smaller than that of the armchair-type [8]CPP belt despite its smaller ring size, due to the presence of the strain-relieving m-terphenyl moieties. The effect of the number of the benzene rings of the zigzag-type CP belts on absorption and emission peaks was small due to interruption of π-conjugation at the m-phenylene moieties. However, the bending effect on the absolute fluorescence quantum yield as well as absorption and emission peaks was significant. Concerning chiroptical properties, the modest anisotropy dissymmetry factors of ECD and CPL were observed in the [8]CP belt.

Hydrogen-bonding patterns in 2,2-bis-(4-methyl-phen-yl)hexa-fluoro-propane pyridinium and ethyl-enedi-ammonium salt crystals.

The crystal structures of two salt crystals of 2,2-bis-(4-methyl-phen-yl)hexa-fluoro-propane (Bmphfp) with amines, namely, dipyridinium 4,4'-(1,1,1,3,3,3-hexa-fluoro-propane-2,2-di-yl)dibenzoate 4,4'-(1,1,1,3,3,3-hexa-fluoro-propane-2,2-di-yl)di-benzoic acid, 2C5H6N+·C17H8F6O4 2-·C17H10F6O4, (1), and a monohydrated ethyl-enedi-ammonium salt ethane-1,2-diaminium 4,4'-(1,1,1,3,3,3-hexa-fluoro-propane-2,2-di-yl)dibenzoate monohydrate, C2H10N2 2+·C17H8F6O4 2-·H2O, (2), are reported. Compounds 1 and 2 crystallize, respectively, in space group P21/c with Z' = 2 and in space group Pbca with Z' = 1. The crystals of compound 1 contain neutral and anionic Bmphfp mol-ecules, and form a one-dimensional hydrogen-bonded chain motif. The crystals of compound 2 contain anionic Bmphfp mol-ecules, which form a complex three-dimensional hydrogen-bonded network with the ethyl-enedi-amine and water mol-ecules.

Enantioselective Synthesis of Polycyclic Aromatic Hydrocarbon (PAH)-Based Planar Chiral Bent Cyclophanes by Rhodium-Catalyzed [2+2+2] Cycloaddition.

The enantioselective synthesis of polycyclic aromatic hydrocarbon (PAH)-based planar chiral cyclophanes was achieved for the first time by the rhodium-catalyzed intramolecular regio- and enantioselective [2+2+2] cycloaddition of tethered diyne-benzofulvenes followed by stepwise oxidative transformations. The thus synthesized planar chiral bent cyclophanes, that possess bent p-terphenyl- and 9-fluorenone-cores, were converted to 9-fluorenol-based ones with excellent ee values of >99 % by diastereoselective 1,2-reduction. These 9-fluorenol-based cyclophanes exhibited high fluorescence quantum yields, which were significantly higher than that of an acyclic reference molecule (78-82 % vs. 48 %). The bending effect on the chiroptical property was also examined, which revealed that the anisotropy factors (gabs values) for electronic circular dichroism (ECD) of these 9-fluorenol-based planar chiral bent cyclophanes increase as the tether length becomes shorter.

Synthesis of Belt- and Möbius-Shaped Cycloparaphenylenes by Rhodium-Catalyzed Alkyne Cyclotrimerization.

A belt-shaped [8]cycloparaphenylene (CPP) and an enantioenriched Möbius-shaped [10]CPP have been synthesized by high-yielding rhodium-catalyzed intramolecular cyclotrimerizations of a cyclic dodecayne and a pentadecayne, respectively. This Möbius-shaped [10]CPP possesses stable chirality and isolated with high enantiomeric purity. It is evident from the reaction Gibbs energy calculation that the above irreversible cyclotrimerizations are highly exothermic; therefore establishing that the intramolecular alkyne cyclotrimerization is a powerful route to strained cyclic molecular strips.

Development of Visible-Light Driven Cu(I) Complex Photosensitizers for Photocatalytic CO2 Reduction.

The visible-light responsive Cu(I)-complex photosensitizers were developed by introducing various aromatic substituents at the 4,7-positions of a 2,9-dimethyl-1,10-phenanthroline (dmp) ligand in a heteroleptic CuI(dmp)(DPEphos)+-type complexes (DPEphos = [2-(diphenylphosphino)phenyl]ether) for photocatalytic CO2 reduction. Introducing biphenyl groups (Bp-) on the dmp ligand enhanced the molar extinction coefficient (ε) of the metal-to-ligand charge transfer (MLCT) band in the visible region (ε = 7,500 M-1cm-1) compared to that of the phenyl (Ph-)-containing analog (ε = 5,700 M-1cm-1 at λmax = 388 nm). However, introducing 4-R-Ph- groups (R = the electron-withdrawing groups NC-, or NO2-) led to a red shift in the band to λmax = 390, 400, and 401 nm, respectively. Single-crystal X-ray analysis showed the Ph- groups were twisted because of the steric repulsion between the 2,6-protons of the Ph- groups and 5,6-protons of the dmp ligand. The result strongly indicated that the π-conjugation effect of the 4-R-Ph- groups is so weak that the lowering of the energy of the dmp π* orbitals is small. However, when 4-R-ph- was substituted by a 5-membered heterorings, there was a larger red shift, leading to an increase in the ε value of the MLCT absorption band. Thus, the substitution to 2-benzofuranyl- groups resulted in visible-light absorption up to 500 nm and a shoulder peak at around 420 nm (ε = 12,300 M-1cm-1) due to the expansion of π-conjugation over the substituted dmp ligand. The photocatalytic reaction for CO2 reduction was tested using the obtained CuI complexes as photosensitizers in the presence of a Fe(dmp)2(NCS)2 catalyst and 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole as a sacrificial reductant, which showed improved CO generation.

Triplon band splitting and topologically protected edge states in the dimerized antiferromagnet.

Search for topological materials has been actively promoted in the field of condensed matter physics for their potential application in energy-efficient information transmission and processing. Recent studies have revealed that topologically invariant states, such as edge states in topological insulators, can emerge not only in a fermionic electron system but also in a bosonic system, enabling nondissipative propagation of quasiparticles. Here we report the topologically nontrivial triplon bands measured by inelastic neutron scattering on the spin-1/2 two-dimensional dimerized antiferromagnet Ba2CuSi2O6Cl2. The excitation spectrum exhibits two triplon bands that are clearly separated by a band gap due to a small alternation in interdimer exchange interaction, consistent with a refined crystal structure. By analytically modeling the triplon dispersion, we show that Ba2CuSi2O6Cl2 is the first bosonic realization of the coupled Su-Schrieffer-Heeger model, where the presence of topologically protected edge states is prompted by a bipartite nature of the lattice.

Rhodium-Catalyzed Synthesis, Crystal Structures, and Photophysical Properties of [6]Cycloparaphenylene Tetracarboxylates.

The synthesis of C2-symmetrical [6]cycloparaphenylene (CPP) tetracarboxylates has been achieved via macrocyclization by the rhodium-catalyzed intermolecular stepwise cross-alkyne cyclotrimerization and subsequent reductive aromatization. The 1H NMR spectra of the thus-obtained C2-symmetrical [6]CPP-tetracarboxylates revealed that the rotation of unsubstituted benzene rings is slow at room temperature. These [6]CPPs formed columnar packing structures, and their absorption maxima were significantly blue-shifted compared to that of nonsubstituted [6]CPP due to the presence of four electron-withdrawing ester moieties.

Tetrakis(phenylethynyl)tetracene: A New π-Extended Rubrene Derivative.

An efficient synthetic route to 5,6,11,12-tetrakis(arylethynyl)tetracenes, new π-extended rubrene derivatives, was developed by means of [2+4] cycloaddition of dialkynylnaphthalyne and dialkynylisobenzofuran. Importantly, two alkynyl groups introduced into the aryne exerts a significant effect in lowering the LUMO energy, allowing practical access to sterically overcrowded polycyclic structures through an efficient HOMO-LUMO interaction. Study on the potential reactivity inherent in the peri-ethynyl-substituted tetracenes revealed several interesting reactivities. X-ray analysis of these new π-extended derivatives showed distorted structures to reduce steric repulsion due to the existence of the substituents at the peri-positions.