The Development and Characterisation of a P(3HB-co-4HB)-Bioactive Glass-Graphene Hydrogel as a Potential Formulation for Biomedical and Therapeutical Translation.

The clinical management of wounds is known to be a significant challenge: not only does the dressing need to ensure and provide the appropriate barrier and healing characteristics, but consideration of patient compliance concerning comfort, functionality, and practicality also needs to be included. The poly(3-hydroxybutyrate-co-4-hydroxubutyrate) (P(3HB-co-4HB)) copolymer, isolated from Cupriavidus malaysiensis USM1020 (C. malaysiensis USM1020), was produced in the presence of excess carbon sources (1,4-butanediol and 1,6-hexanediol) using either a shake flask cultivation process or a bioreactor fermentation system. P(3HB-co-4HB) is widely known to be biodegradable and highly biocompatible and contains a tuneable 4HB monomer molar fraction, which is known to affect the final physicochemical properties of the intracellular copolymer. In this paper, we describe not only the fabrication of the polymeric gel but also its optimised profiling using a range of physical and mechanical techniques, i.e., SEM, FTIR, DMA, DSC, and WCA. The further enhancement of the gel through additional functionalisation with sol-gel-derived bioactive glass and liquid-exfoliated graphene was also investigated. The biocompatibility and biological characterisation of the substrates was assessed using murine osteoblasts (MC3T3), human primary dermal fibroblasts (HDFs), human fibroblast (BJ) cells, and standard cell culture assays (i.e., metabolic activity, LDH release, and live/dead staining). In short, P(3HB-co-4HB) was successfully isolated from the bacteria, with the defined physico-chemical profiles dependent on the culture substrate and culturing platform used. The additional enhancement of the copolymer with bioactive glass and/or graphene was also demonstrated by varying the combination loading of the materials, i.e., graphene resulted in an increase in tensile strength (~11 MPa) and the wettability increased following the incorporation of bioactive glass and 0.01 wt% graphene (WCA ~46.3°). No detrimental effects in terms of biocompatibility were noticed during the 7 days of culture in the primary and established cell lines. This study demonstrates the importance of optimising each of the individual components within the biocomposite and their relationship concerning the fine-tuning of the material's properties, thus targeting and impacting the endpoint application.

Single strain control of microbial consortia.

The scope of bioengineering is expanding from the creation of single strains to the design of microbial communities, allowing for division-of-labour, specialised sub-populations and interaction with "wild" microbiomes. However, in the absence of stabilising interactions, competition between microbes inevitably leads to the removal of less fit community members over time. Here, we leverage amensalism and competitive exclusion to stabilise a two-strain community by engineering a strain of Escherichia coli which secretes a toxin in response to competition. We show experimentally and mathematically that such a system can produce stable populations with a composition that is tunable by easily controllable parameters. This system creates a tunable, stable two-strain consortia while only requiring the engineering of a single strain.

Applications of off-gas mass spectrometry in fed-batch mammalian cell culture.

Off-gas analysis using a magnetic sector mass spectrometer was performed in mammalian cell cultures in the fed-batch mode at the 5 L bench and 50 L pilot scales. Factors affecting the MS gas traces were identified during the duration of the fed-batch cultures. Correlation between viable cell concentration (VCC) and oxygen concentration of the inlet gas into the bioreactor (O2-in) resulted in R2 ≈ 0.9; O2-in could be used as a proxy for VCC. Oxygen mass transfer (kLa) was also quantified throughout the culture period with antifoam addition at different time points which is shown to lower the kLa. Real-time specific oxygen consumption rate (qO2) of 2-20 pmol/cell/day throughout the bioreactor runs were within the range of values reported in literature for mammalian cell cultures. We also report, to our knowledge, the first instance of a distinct correlation between respiration quotient (RQ) and the metabolic state of the cell culture with regard to lactate production phase (average RQ > 1) and consumption phase (average RQ < 1).