Unveiling the mechanisms of Moso bamboo's motor function and internal growth stress.

Bamboo, a renewable resource with rapid growth and an impressive height-to-diameter ratio, faces mechanical instability due to its slender structure. Despite this, bamboo maintains its posture without breaking in its battle against environmental and gravitational forces. But what drives this motor function in bamboo? This study subjected Moso bamboo (Phyllostachys edulis) to gravitational stimulation, compelling it to grow at a 45° angle instead of upright. Remarkably, the artificially inclined bamboo exhibited astonishing shape control and adjustment capabilities. The growth strain was detected at both macroscopic and microscopic levels, providing evidence for the presence of internal stress, namely growth stress. The high longitudinal tensile stress on the upper side, along with a significant asymmetry in stress distribution in tilted bamboo, plays a pivotal role in maintaining its mechanical stability. Drawing upon experimental findings, it can be deduced that the growth stress primarily originates from the broad layers of fiber cells. Bamboo could potentially regulate the magnitude of growth stress by modifying the number of fiber cell layers during its maturation process. Additionally, the microfibril angle and lignin disposition may decisively influence the generation of growth stress.

Tackling Energy Loss in Organic Solar Cells via Volatile Solid Additive Strategy.

The energy loss induced open-circuit voltage (VOC) deficit hampers the rapid development of state-of-the-art organic solar cells (OSCs), therefore, it is extremely urgent to explore effective strategies to address this issue. Herein, a new volatile solid additive 1,4-bis(iodomethyl)cyclohexane (DIMCH) featured with concentrated electrostatic potential distribution is utilized to act as a morphology-directing guest to reduce energy loss in multiple state-of-art blend system, leading to one of highest efficiency (18.8%) at the forefront of reported binary OSCs. Volatile DIMCH decreases radiative/non-radiative recombination induced energy loss (ΔE2/ΔE3) by rationally balancing the crystallinity of donors and acceptors and realizing homogeneous network structure of crystal domain with reduced D-A phase separation during the film formation process and weakens energy disorder and trap density in OSCs. It is believed that this study brings not only a profound understanding of emerging volatile solid additives but also a new hope to further reduce energy loss and improve the performance of OSCs.

The improved stratified transformer for organ segmentation of Arabidopsis.

Segmenting plant organs is a crucial step in extracting plant phenotypes. Despite the advancements in point-based neural networks, the field of plant point cloud segmentation suffers from a lack of adequate datasets. In this study, we addressed this issue by generating Arabidopsis models using L-system and proposing the surface-weighted sampling method. This approach enables automated point sampling and annotation, resulting in fully annotated point clouds. To create the Arabidopsis dataset, we employed Voxel Centroid Sampling and Random Sampling as point cloud downsampling methods, effectively reducing the number of points. To enhance the efficiency of semantic segmentation in plant point clouds, we introduced the Plant Stratified Transformer. This network is an improved version of the Stratified Transformer, incorporating the Fast Downsample Layer. Our improved network underwent training and testing on our dataset, and we compared its performance with PointNet++, PAConv, and the original Stratified Transformer network. For semantic segmentation, our improved network achieved mean Precision, Recall, F1-score and IoU of 84.20, 83.03, 83.61 and 73.11%, respectively. It outperformed PointNet++ and PAConv and performed similarly to the original network. Regarding efficiency, the training time and inference time were 714.3 and 597.9 ms, respectively, which were reduced by 320.9 and 271.8 ms, respectively, compared to the original network. The improved network significantly accelerated the speed of feeding point clouds into the network while maintaining segmentation performance. We demonstrated the potential of virtual plants and deep learning methods in rapidly extracting plant phenotypes, contributing to the advancement of plant phenotype research.

Efficient soluble PTCBI-type non-fullerene acceptor materials for organic solar cells.

Single perylene diimide (PDI) used as a non-fullerene acceptor (NFA) in organic solar cells (OSCs) is enticing because of its low cost and excellent stability. To improve the photovoltaic performance, it is vital to narrow the bandgap and regulate the stacking behavior. To address this challenge, we synthesize soluble perylenetetracarboxylic bisbenzimidazole (PTCBI) molecules with a bulky side chain at the bay region, by replacing the widely used "swallow tail" type alkyl chains at the imide position of PDI molecules with a planar benzimidazole structure. Compared with PDI molecules, PTCBI molecules exhibit red-shifted UV-vis absorption spectra with larger extinction coefficient, and one magnitude higher electron mobility. Finally, OSCs based on one soluble PTCBI-type NFA, namely MAS-7, exhibit a champion power conversion efficiency (PCE) of 4.34%, which is significantly higher than that of the corresponding PDI-based OSCs and is the highest PCE of PTCBI-based OSCs reported. These results highlight the potential of soluble PTCBI derivatives as NFAs in OSCs.

Hybrid Cycloalkyl-Alkyl Chain-Based Symmetric/Asymmetric Acceptors with Optimized Crystal Packing and Interfacial Exciton Properties for Efficient Organic Solar Cells.

Hybrid cycloalkyl-alkyl side chains are considered a unique composite side-chain system for the construction of novel organic semiconductor materials. However, there is a lack of fundamental understanding of the variations in the single-crystal structures as well as the optoelectronic and energetic properties generated by the introduction of hybrid side chains in electron acceptors. Herein, symmetric/asymmetric acceptors (Y-C10ch and A-C10ch) bearing bilateral and unilateral 10-cyclohexyldecyl are designed, synthesized, and compared with the symmetric acceptor 2,2'-((2Z,2'Z)-((12,13-bis(2-butyloctyl)-3,9 bis(ethylhexyl)-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2″,3″':4',5']thieno[2',3':4,5] pyrrolo[3,2-g]thieno[2',3':4,5]thieno[3,2-b]indole-2,10- diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile (L8-BO). The stepwise introduction of 10-cyclohexyldecyl side chains decreases the optical bandgap, deepens the energy level, and enables the acceptor molecules to pack closely in a regular manner. Crystallographic analysis demonstrates that the 10-cyclohexyldecyl chain endows the acceptor with a more planar skeleton and enforces more compact 3D network packing, resulting in an active layer with higher domain purity. Moreover, the 10-cyclohexyldecyl chain affects the donor/acceptor interfacial energetics and accelerates exciton dissociation, enabling a power conversion efficiency (PCE) of >18% in the 2,2'-((2Z,2'Z)-((12,13-bis(2-ethylhexyl)-3,9-diundecyl12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2″,3″':4',5']thieno[2',3':4,5]pyrrolo[3,2-g]thieno[2',3':4,5]thieno[3,2-b]indole-2,10-diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile (Y6) (PM6):A-C10ch-based organic solar cells (OSCs). Importantly, the incorporation of Y-C10ch as the third component of the PM6:L8-BO blend results in a higher PCE of 19.1%. The superior molecular packing behavior of the 10-cyclohexyldecyl side chain is highlighted here for the fabrication of high-performance OSCs.

Continuously released Zn2+ in 3D-printed PLGA/ß-TCP/Zn scaffolds for bone defect repair by improving osteoinductive and anti-inflammatory properties.

Long-term nonunion of bone defects has always been a major problem in orthopedic treatment. Artificial bone graft materials such as Poly (lactic-co-glycolic acid)/ß-tricalcium phosphate (PLGA/ß-TCP) scaffolds are expected to solve this problem due to their suitable degradation rate and good osteoconductivity. However, insufficient mechanical properties, lack of osteoinductivity and infections after implanted limit its large-scale clinical application. Hence, we proposed a novel bone repair bioscaffold by adding zinc submicron particles to PLGA/ß-TCP using low temperature rapid prototyping 3D printing technology. We first screened the scaffolds with 1 wt% Zn that had good biocompatibility and could stably release a safe dose of zinc ions within 16 weeks to ensure long-term non-toxicity. As designed, the scaffold had a multi-level porous structure of biomimetic cancellous bone, and the Young's modulus (63.41 ± 1.89 MPa) and compressive strength (2.887 ± 0.025 MPa) of the scaffold were close to those of cancellous bone. In addition, after a series of in vitro and in vivo experiments, the scaffolds proved to have no adverse effects on the viability of BMSCs and promoted their adhesion and osteogenic differentiation, as well as exhibiting higher osteogenic and anti-inflammatory properties than PLGA/ß-TCP scaffold without zinc particles. We also found that this osteogenic and anti-inflammatory effect might be related to Wnt/ß-catenin, P38 MAPK and NFkB pathways. This study lay a foundation for the follow-up study of bone regeneration mechanism of Zn-containing biomaterials. We envision that this scaffold may become a new strategy for clinical treatment of bone defects.

Fatigue behavior of zirconia with microgrooved surfaces produced using femtosecond laser.

Femtosecond laser is a promising surface treatment tool for zirconia implant. In this study, the fatigue behavior of zirconia specimens with microgrooved surfaces formed by femtosecond laser is reported. One hundred sixty CAD/CAM zirconia bars (20 mm × 4 mm × 1.4 mm) were evenly divided into four groups with different surface: as sintered; sandblasted with 110 µm Al2O3; femtosecond laser produced microgrooves having 50 µm width, 30 µm depth, and 100 µm pitch; microgrooves having 30 µm width, 20 µm depth, and 60 µm pitch. The femtosecond laser formed micro/nanostructured microgrooves with precise size on zirconia surfaces. XRD analysis indicated that microgrooved surface showed no obvious tetragonal-to-monoclinic phase transformation. The fatigue strength of sandblasted specimens (728 MPa) was significantly higher than that of as sintered specimens (570 MPa). However, the fatigue strength of specimens with microgrooved surface decreased to about 360-380 MPa. The results suggest femtosecond laser is an effective technique to regulate the surface microtopography of zirconia, while further investigations are needed to improve its fatigue behavior.

Effects of Accelerated Ageing by Humidity and Heat Cycles on the Quality of Bamboo.

The effect of humidity and heat environmental conditions on the durability of conventional bamboo materials is a pressing issue in the reserving phase of biomass materials. In this study, the relationship between the main physicochemical, pyrolytic, and mechanical properties of bamboo before and after ageing has been investigated. Exposure of engineered bamboo raw materials with moisture content up to 10% to alternating humidity and heat cycles (20 °C 98% RH-30 °C 64% RH-40 °C 30% RH) of ageing (HHT) causes degradation of the chemical polymer matrix. Byk Gardner 6840 color difference meter, X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), compression intensity, thermogravimetric-infrared spectroscopy (TG-IR), and density changes are used to assess the quality of the material before and after ageing. No significant changes in the moisture content within the range of 6.12 ± 0.327 after two weeks of the engineered bamboo during wet thermal cyclic ageing were determined. However, there were significant differences in mass loss (7.75-9.93 g), cellulose crystallinity, chemical changes, compression strength, and pyrolytic properties. Differences in specimen colors were observed during 10 weeks of the accelerated humidity heat cycling ageing, and TCD variations ranged from 3.75 to 20.08 and from 0.25 and 3.24, respectively. Reduced cellulose crystallinity (36.459-22.638%), axial compressive strength (63.07-88.09 MPa), and modulus of rupture (2409-4286 MPa) were found during aging, whereas deformation and ductility properties were improved. Both natural and humidity heat ageing improve thermal stability and peak pyrolysis rates (0.739-0.931; 0.731-0.797). Humidity heat cyclic ageing will assist in the design and risk assessment of warehousing environments for industrial applications.

Biomechanically-Adapted Immunohydrogels Reconstructing Myelin Sheath for Peripheral Nerve Regeneration.

Myelin sheath reconstruction plays an important role in peripheral nerve regeneration. But the hindered reconstruction of myelin sheath, due to the inadequate repair phenotypes of macrophages and Schwann cells after peripheral nerve injury, often causes poor functional nerve recovery. Here, biomechanically-adapted immunohydrogels are prepared as the FK506-loaded platforms and nerve tissue engineering scaffolds to reconstruct myelin sheath for peripheral nerve regeneration. By immunofluorescent staining, an increase in the proportion of F4/80+ markers reveals that the biomechanically-adapted scaffolds facilitate recruitment of macrophages. Furthermore, the high Interleukin 10 (IL-10) mRNA expression level suggests the anti-inflammation learning effects of FK506 in vitro, which is further confirmed by a high CD206/TNF-α ratio in the FK506 Gel group in vivo. The immune learning effects are positively related to the increase in compactness and thickness of myelin sheath, indicating the synergy of structural reconstruction of myelin sheath and M2 phenotype polarization of macrophages. All these data indicate that the biomechanically-adapted immunohydrogels enhance recruitment of macrophages, educate M2 polarization of macrophages and promote a neuroprotective environment, which in consequence reconstructs myelin sheath for peripheral nerve regeneration.

A Nonlinear Magnetoelastic Energy Model and Its Application in Domain Wall Velocity Prediction.

In this letter, we propose a nonlinear Magnetoelastic Energy (ME) with a material parameter related to electron interactions. An attenuating term is contained in the formula of the proposed nonlinear ME, which can predict the variation in the anisotropic magneto-crystalline constants induced by external stress more accurately than the classical linear ME. The domain wall velocity under stress and magnetic field can be predicted accurately based on the nonlinear ME. The proposed nonlinear ME model is concise and easy to use. It is important in sensor analysis and production, magneto-acoustic coupling motivation, magnetoelastic excitation, etc.

Application of 3D-Printed, PLGA-Based Scaffolds in Bone Tissue Engineering.

Polylactic acid-glycolic acid (PLGA) has been widely used in bone tissue engineering due to its favorable biocompatibility and adjustable biodegradation. 3D printing technology can prepare scaffolds with rich structure and function, and is one of the best methods to obtain scaffolds for bone tissue repair. This review systematically summarizes the research progress of 3D-printed, PLGA-based scaffolds. The properties of the modified components of scaffolds are introduced in detail. The influence of structure and printing method change in printing process is analyzed. The advantages and disadvantages of their applications are illustrated by several examples. Finally, we briefly discuss the limitations and future development direction of current 3D-printed, PLGA-based materials for bone tissue repair.

Effect of bending on radial distribution density, MFA and MOE of bent bamboo.

One of the excellent characteristics of bamboo is the deformation stability. However, the reasons for the good bending stability of bamboo have not been well studied. In this study, we examined the pathways that controls bending deformation in bamboo. A hand-bent phyllostachys iridescens member was chosen to examine continuous density distribution, microfibril angle (MFA) and modulus of elasticity (MOE) along radial direction using SilviScan analysis. Our results show that in bent bamboo, MFA is lower in tension sample and higher in compression sample than neutral sample. There is a strong linear positive correlation between density and MOE, while negative linear correlation between MOE and MFA and no obvious linear correlation between MFA and density. Increased bending was influential in primarily changing the MOE, while also altering the density distribution and MFA. Our results demonstrate variation in density, MOE and MFA distribution along radial direction of tension, neutral and compression samples, which play an important role in maintaining the bending characteristics of bamboo.

Tung Oil Thermal Treatment Improves the Visual Effects of Moso Bamboo Materials.

Color is one of the most important characteristics of a material's appearance, which affects the additional value of bamboo and psychological feelings of users. Previous studies have shown that the dimensional stability, mildew resistance and durability of bamboo were improved after tung oil thermal treatment. In this study, the effects of tung oil thermal treatment on bamboo color at different temperatures and durations of time were investigated. The results show that the lightness (L*) of bamboo decreased as the tung oil temperature or duration of time increased. The red-green coordinates (a*) and color saturation (C*) of bamboo were gradually increased as the tung oil temperature rose from 23 °C to 160 °C, while the a* and C* were gradually decreased when the temperature continued to rise from 160 °C to 200 °C. There was no significant difference in the yellow-blue coordinates (b*) of bamboo when the duration was prolonged from 0.5 h to 3 h with tung oil thermal treatment at 140 °C. Eye movement data show that the popularity of bamboo furniture was significantly improved at 23-100 °C and slightly improved at 160-180 °C with tung oil treatment. Therefore, tung oil thermal treatment plays a positive role in improving visual effects and additional value of bamboo.

Improving the Mould and Blue-Stain-Resistance of Bamboo through Acidic Hydrolysis.

Bamboo is much more easily attacked by fungus compared with wood, resulting in shorter service life and higher loss in storage and transportation. It has been long accepted that the high content of starch and sugars in bamboo is mainly responsible for its low mould resistance. In this paper, acetic acid, propionic acid, oxalic acid, citric acid, and hydrochloric acid were adopted to hydrothermally hydrolyze the starch in bamboo, with the aims to investigate their respective effect on the mould and blue-stain resistance of bamboo, and the optimized citric acid in different concentrations were studied. The starch content, glucose yields, weight loss, and colour changes of solid bamboo caused by the different acidic hydrolysis were also compared. The results indicated that weak acidic hydrolysis treatment was capable of improving mould-resistant of bamboo. The mould resistance increased with the increased concentration of citric acid. Bamboo treated with citric acid in the concentration of 10% could reduce the infected area ranging to 10-17%, the growth rating of which could reach 1 resistance. The content of soluble sugar and starch remained in bamboo decreased significantly from 43 mg/g to 31 mg/g and 46 mg/g to 23 mg/g, respectively, when the citric acid concentration varied from 4% to 10%. Citric acid treatments of 10% also caused a greatest surface colour change and weight loss. The results in this study demonstrated citric acid treatment can effectively reduce the starch grain and soluble sugars content and improve mould resistance of bamboo, which can be attributed to the reduction of starch grain and soluble carbohydrates (such as glucose, fructose, and sucrose, etc.) in bamboo.

Multiscale Architecture and Superior High-Temperature Performance of Discontinuously Reinforced Titanium Matrix Composites.

Discontinuously reinforced titanium matrix composites (DRTMCs), as one of the most important metal matrix composites (MMCs), are expected to exhibit high strength, elastic modulus, high-temperature endurability, wear resistance, isotropic property, and formability. Recent innovative research shows that tailoring the reinforcement network distribution totally differently from the conventional homogeneous distribution can not only improve the strengthening effect but also resolve the dilemma of DRTMCs with poor tensile ductility. Based on the network architecture, multiscale architecture, for example, two-scale network and laminate-network microstructure can further inspire superior strength, creep, and oxidation resistance at elevated temperatures. Herein, the most recent developments, which include the design, fabrication, microstructure, high-temperature performance, strengthening mechanisms, and future research opportunities for DRTMCs with multiscale architecture, are captured. In this regard, the service temperature can be increased by 200 °C, and the creep rupture time by 59-fold compared with those of conventional titanium alloys, which can meet the urgent demands of lightweight nickel-based structural materials and potentially replace nickel base superalloys at 600-800 °C to reduce weight by 45%. In fact, multiscale architecture design strategy will also favorably open a new era in the research of extensive metallic materials for improved performances.

Whole-rock and mineral chemical data from a profile of the ~900 Ma Niutishan Fe-Ti-rich sill in XuZhou, North China.

In this article, the geochemical data of a ~900 Ma mafic sill from Xuzhou, North China are reported. These datasets include 37 whole-rock major and trace element data, and 21 major element data on plagioclase, 20 major element data on clinopyroxene crystals, 10 major element data on apatite crystals, 7 major element data of preserved coexisting titano-magnetite and ilmenite grains, 36 major element data on different types of ilmenite crystals, 13 major element and 11 trace element data on titanite. These data are associated with Su et al. "Petrogenesis of a ~900 Ma mafic sill from Xuzhou, North China: Implications for the genesis of Fe-Ti-rich rocks" (Su et al., 2018), and in which their characters and variations were interpreted and discussed.

Erratum: Downregulation of ubiquitin-specific peptidase 39 suppresses the proliferation and induces the apoptosis of human colorectal cancer cells.

[This corrects the article DOI: 10.3892/ol.2018.8061.].

Downregulation of ubiquitin-specific peptidase 39 suppresses the proliferation and induces the apoptosis of human colorectal cancer cells.

Ubiquitin-specific peptidase 39 (USP39) has been reported to participate in the mitotic spindle checkpoint and the process of cytokinesis. and has been identified as a therapeutic target for various types of cancer. However, the effect of USP39 in colorectal cancer (CRC) has not been investigated. To explore the functional role of USP39 in CRC cell growth, lentivirus-mediated RNA interference was applied to inhibit USP39 expression in SW1116 and HCT116 cells. The relative USP39 mRNA and protein expression levels were significantly reduced in the USP39 knockdown cells, as verified by reverse transcription-quantitative polymerase chain reaction and western blot analysis. USP39 knockdown significantly reduced the proliferation and colony formation abilities of CRC cells, and induced apoptosis and cell cycle arrest in the G2/M phases, as determined by an MTT assay, a colony formation assay and flow cytometry analysis. Furthermore, western blot analysis demonstrated that USP39 knockdown may have induced apoptosis through the upregulation of p53, p-p53, PARP and caspase-3 expression in SW1116 cells. In conclusion, USP39 may be a novel biological marker for targeted therapy against CRC, and requires further investigation.

Copious Irrigation Versus Suction Alone During Laparoscopic Appendectomy for Complicated Appendicitis in Adults.

OBJECTIVE: The objective of this study was to determine whether copious irrigation of peritoneal cavity during laparoscopic appendectomy for complicated appendicitis effectively reduces the incidence of postoperative complications and improves the postoperative recovery in adults compared with suction alone. METHODS: In this prospective randomized trial, adult patients with complicated appendicitis were randomized to "irrigation and suction"(IS) group or "suction only"(SO) group. All surgery was performed with a standardized 3-port laparoscopic approach. The IS group received peritoneal irrigation with a minimum of 2000 mL sterile normal saline. The study primary outcomes included wound infection and postoperative intra-abdominal abscess. The study secondary outcomes included duration of operation, first anal exsufflation time, duration of hospital stay and hospital charges. Chi-squared and t-tests were used to analyze the study data. RESULTS: Between January 2015 and June 2016, a total of 260 patients with complicated appendicitis were enrolled in the study. The peritoneal irrigation resulted in a longer operation time (51.6 ± 16.1 vs. 41.5 ± 15.2 min, p <0.001). There was no significant difference in the rate of wound infection between the two groups. However, the patients who received irrigation had a lower postoperative intra-abdominal abscess rate (3.1% vs. 9.2%, p = 0.039), earlier anal exsufflation (25.2 ± 16.5 vs. 30.7 ± 18.1 hr, p = 0.011), shorter hospital stay (10.2 ± 2.5 vs. 12.5 ± 2.8 days, p <0.001) and lower hospital charges (¥14,592 ± 2,251 vs. 16,674 ± 2,163, p <0.001) compared to those received suction alone. CONCLUSIONS: The study findings revealed that copious irrigation of peritoneal cavity during laparoscopic appendectomy could decrease the incidence of postoperative intra-abdominal abscess in adult patients with complicated appendicitis. These patients also had faster postoperative recovery and lower hospital charges.

Greater Omental Milky Spot Examination for Diagnosis of Peritoneal Metastasis in Gastric Cancer Patients.

OBJECTIVE: To evaluate the diagnostic value of cytological greater omental milky spot examination for the diagnosis of peritoneal metastasis in gastric cancer patients. METHODS: A total of 136 patients diagnosed with gastric cancer and without distant metastasis were enrolled in our study. All patients underwent laparoscopy and CH40 suspension liquid dye of peritoneal lymph nodes preoperatively as well as ascites or peritoneal lavage fluid collections and excisions of marked greater omental milky spot tissues perioperatively. RESULTS: According to the laparoscopic results, the patients were divided into T1-T2 stage (n = 56) without and into T3-T4 stage (n = 80) with tumor invasion into the serosal layer. Among the T1-T2-stage patients, tumor cells could be detected in peritoneal lavage fluids in 2 cases, whereas with greater omental milky spot examination, peritoneal metastasis was detected in 8 cases. Among the 80 cases in the T3-T4 stage, tumor cells could be detected in 28 cases via peritoneal lavage cytology and in 43 cases by greater omental milky spot examinations, and 4 cases had cancer cell infiltration also in nonmilky spot omental areas. The statistical analysis showed that the staging accuracy rate of exfoliative cytology examination was superior to that of the laparoscopic exploration (P < .05), but its sensitivity was significantly lower than that obtained with cytological greater omental milky spot examinations (P < .05). CONCLUSIONS: The laparoscopic exploration could make a preliminary diagnosis of peritoneal metastasis via serosal layer invasion detection. For further analyses, cytological examinations of greater omental milky spots were more sensitive than exfoliative cytology.