Rapid Production Nasal Osteotomy Simulators With Multi-Modality Manufacturing: 3D Printing, Casting, and Molding.

OBJECTIVE: To expand and improve upon previously described nasal osteotomy models with the goals of decreasing cost and production time while ensuring model fidelity. To assess change in participant confidence in their understanding of and ability to perform nasal osteotomies following completion of the simulation course. STUDY DESIGN: Prospective study. SETTING: Simulation training course for otolaryngology residents at West Virginia University. METHODS: A combined methodology of 3D printing, silicone molding, and resin casting was used to design a nasal osteotomy model to address material issues such as print delamination. Multiple models were then used in a simulation lab on performing nasal osteotomies. Model utility and impact on participant confidence was assessed at baseline, postlecture, and postsimulation lab. RESULTS: Using a combined manufacturing methodology, we achieved a production time reduction of 97.71% and a cost reduction of 82.02% for this polyurethane resin nasal osteotomy model relative to a previously described osteotomy model. Participants in the simulation course were noted to have a significant improvement in confidence in their understanding of and ability to perform nasal osteotomies from baseline and postlecture and also from postlecture and postsimulation lab (P < .05 for all). CONCLUSION: By incorporating multiple manufacturing modalities (molding and casting) in addition to 3D printing, this study achieved a large reduction in both production time and cost in fabrication of a nasal osteotomy simulator and addressed material limitations imposed by fused deposition modeling printers. This design methodology serves as an example on how these barriers may be addressed in unrelated simulation projects. Model fidelity was improved with addition of a silicone soft tissue midface. Improvement in participant confidence was noted following completion of the simulation lab.

Role of Sinonasal Anatomic Variants in Recurrent Acute Rhinosinusitis.

OBJECTIVES: Prior studies evaluating the role of sinonasal anatomic variants with recurrent acute rhinosinusitis (RARS) are limited by inconsistent results. The goal of this study is to evaluate the association between sinonasal anatomic variants and RARS. METHODS: A 1:2 retrospective case-control study was conducted using patients presenting to the rhinology clinic from August 2020 to January 2023. A total of 60 patients with RARS were compared to 120 control patients. RARS was diagnosed based on the International Consensus Statement on Allergy and Rhinology criteria of four or more independent episodes of acute rhinosinusitis per year with at least one episode documented by objective findings, with complete resolution of the infection in-between episodes. Sinonasal anatomic variants included nasal septal deviation (NSD), concha bullosa (CB), infraorbital (Haller) cells, nasal septal spur in the middle meatus, and frontal sinus cells (supra-agger, supra-agger frontal, and suprabullar frontal cells). RESULTS: Age was similar in RARS and control patients (47.4 ± 16.5 vs. 49.3 ± 14.5, p = 0.432). Both the RARS group and control group were more likely to be female (78.3% vs. 77.5%, p = 0.899). There was no significant association between NSD and RARS compared to the control group (OR = 0.97, p = 0.916), and no significant association between any of the anatomic variants and RARS [infraorbital cells (OR = 0.64, p = 0.167), CB (OR = 0.84, p = 0.596), spur in the middle meatus (OR = 1.28, p = 0.514), supra-agger (OR = 0.88, p = 0.708), supra-agger frontal cells (OR = 0.97, p = 0.939), or suprabullar frontal cells (OR = 1.13, p = 0.766)]. CONCLUSION: Our findings suggest no association between nasal septal deviation or any of the anatomic variants studied and RARS. LEVEL OF EVIDENCE: 3 Laryngoscope, 2024.

Acute Emphysematous Epiglottitis: A Case Report.

Epiglottitis is a bacterial infection of the upper respiratory tract that can be rapidly progressive and life-threatening. Though predominantly seen in unvaccinated children, there seems to be a shift with the incidence of adult cases rising following the Haemophilus Influenza B (HiB) vaccine. There are several reports of epiglottitis manifesting as an abscess, but few cases report on the formation of an emphysematous abscess. Additionally, little is known on the bacterial etiology of such infections. Here, we present a case of a patient found to have acute emphysematous epiglottis managed with fiberoptic intubation, drainage, and culture of the abscess. Laryngoscope, 133:2747-2750, 2023.

Role of the cytoskeleton in the development of a hypofibrotic cardiac fibroblast phenotype in volume overload heart failure.

Hemodynamic load regulates cardiac remodeling. In contrast to pressure overload (increased afterload), hearts subjected to volume overload (VO; preload) undergo a distinct pattern of eccentric remodeling, chamber dilation, and decreased extracellular matrix content. Critical profibrotic roles of cardiac fibroblasts (CFs) in postinfarct remodeling and in response to pressure overload have been well established. Little is known about the CF phenotype in response to VO. The present study characterized the phenotype of primary cultures of CFs isolated from hearts subjected to 4 wk of VO induced by an aortocaval fistula. Compared with CFs isolated from sham hearts, VO CFs displayed a "hypofibrotic" phenotype, characterized by a ~50% decrease in the profibrotic phenotypic markers α-smooth muscle actin, connective tissue growth factor, and collagen type I, despite increased levels of profibrotic transforming growth factor-ß1 and an intact canonical transforming growth factor-ß signaling pathway. Actin filament dynamics were characterized, which regulate the CF phenotype in response to biomechanical signals. Actin polymerization was determined by the relative amounts of G-actin monomers versus F-actin. Compared with sham CFs, VO CFs displayed ~78% less F-actin and an increased G-actin-to-F-actin ratio (G/F ratio). In sham CFs, treatment with the Rho kinase inhibitor Y-27632 to increase the G/F ratio resulted in recapitulation of the hypofibrotic CF phenotype observed in VO CFs. Conversely, treatment of VO CFs with jasplakinolide to decrease the G/F ratio restored a more profibrotic response (>2.5-fold increase in α-smooth muscle actin, connective tissue growth factor, and collagen type I). NEW & NOTEWORTHY The present study is the first to describe a "hypofibrotic" phenotype of cardiac fibroblasts isolated from a volume overload model. Our results suggest that biomechanical regulation of actin microfilament stability and assembly is a critical mediator of cardiac fibroblast phenotypic modulation.

Defining Coronary Flow Patterns: Comprehensive Automation of Transthoracic Doppler Coronary Blood Flow.

The coronary microcirculation (CM) plays a critical role in the regulation of blood flow and nutrient exchange to support the viability of the heart. In many disease states, the CM becomes structurally and functionally impaired, and transthoracic Doppler echocardiography can be used as a non-invasive surrogate to assess CM disease. Analysis of Doppler echocardiography is prone to user bias and can be laborious, especially if additional parameters are collected. We hypothesized that we could develop a MATLAB algorithm to automatically analyze clinically-relevant and non-traditional parameters from murine PW Doppler coronary flow patterns that would reduce intra- and inter-operator bias, and analysis time. Our results show a significant reduction in intra- and inter-observer variability as well as a 30 fold decrease in analysis time with the automated program vs. manual analysis. Finally, we demonstrated good agreement between automated and manual analysis for clinically-relevant parameters under baseline and hyperemic conditions. Resulting coronary flow velocity reserve calculations were also found to be in good agreement. We present a MATLAB algorithm that is user friendly and robust in defining and measuring Doppler coronary flow pattern parameters for more efficient and potentially more insightful analysis assessed via Doppler echocardiography.

Coronary Microvascular Remodeling in Type 2 Diabetes: Synonymous With Early Aging?

Type 2 diabetes mellitus (T2DM) is suggested to cause an "early vascular aging" phenomenon that is associated with vascular dysfunction, remodeling, and adverse alterations in vascular stiffness. Given that both T2DM and aging are prominent risk factors for cardiovascular disease, the aim of this study was to test the hypothesis that coronary resistance microvessel (CRM) remodeling and impairments in flow occur in the compound setting of T2DM and aging. Normal heterozygous Db/db controls and homozygous db/db mice were aged to 16 (young) or 36 (aged) weeks for all experiments and passive pressure myography and echocardiography were used to assess vascular mechanics, and structure. CRM wall thickness was significantly increased at each pressure in aged control mice compared to young control mice (9.4 ± 0.6 vs. 6.8 ± 0.2 µm, respectively, p < 0.001); however, there were no significant differences in CRM wall thickness of aged db/db mice vs. young db/db mice. Aged control mice had a higher medial CSA compared to young control mice (3847 ± 303 vs. 2715 ± 170 µm2, p < 0.01); however, there were no significant differences in medial CSA of aged db/db mice vs. young db/db mice. Elastic modulus was lower in aged control CRMs vs. young control CRMs (3.5x106± 0.7 × 106 vs. 8.7 × 106± 0.6 × 106, p < 0.0001). Elastic modulus remained the same in young db/db mice vs. aged db/db mice. These data show that the diabetic CRMs undergo adverse remodeling at an early age, similar to normal aged CRMs, that persists toward senescence, and it further suggests that diabetic CRMs are subject to an early aging phenomenon.