The Ultrasound-guided Anteromedial Joint Line Approach: A Targeted Corticosteroid Injection Technique for Patients With Medial Knee Pain.

BACKGROUND: Medial knee pain is a common complaint in the adult population. When conservative measures fail, intraarticular knee corticosteroid injections are often offered through the superolateral approach into the suprapatellar recess to provide short-term relief. However, some patients fail to respond and require alternative approaches. The anteromedial joint line (AMJL) approach, which targets the medial compartment, may be more effective when pain-generating pathologies such as synovitis are located in the medial compartment. To date, there have been no dedicated studies evaluating ultrasound-guided (USg) corticosteroid injections through the AMJL approach to reduce medial knee pain. OBJECTIVES: The current study aims to assess the clinical characteristics, ultrasound findings, and clinical outcomes for patients with medial knee pain who received USg corticosteroid injections via the AMJL approach. STUDY DESIGN: Retrospective study. SETTING: This study took place at one academic musculoskeletal ultrasound clinic at an urban tertiary care center. METHODS: Sixty-five patients (76 knees; 11 patients with bilateral injections) with medial knee pain who had received USg-AMJL corticosteroid injections from January 2016 through  March 2020 were reviewed for inclusion. Baseline demographic information and clinical characteristics from one year prior to 6 months following USg-AMJL injection were analyzed for each patient. Responders were defined as those who reported pain relief, decreased usage of analgesic medications, or increased physical activity. Nonresponders  were defined as those not meeting any of the responder endpoints. RESULTS: Within one year prior to receiving a USg-AMJL injection, 51.3% (39/76 knees) had attempted superolateral knee injections without relief. Immediately following a USg-AMJL injection, 98.7% (75/76) experienced symptomatic relief. Follow-up visits took place on average at 11 weeks postinjection with 92.3% (60/65 patients) responding positively. In comparison to the responder group, the nonresponder group had a significantly older mean age (P = 0.009), lower mean body mass index (P = 0.007), and higher burden of morbidities as measured by the Charlson Comorbidity Index (P = 0.044). One patient reported a steroid flare within one week of injection. The most common diagnoses contributing to medial knee pain for these patients were osteoarthritis, medial meniscal injury, crystal arthropathy, and medial collateral ligament injury, which were supported by point-of-care ultrasound findings. LIMITATIONS: This study was limited by its sample size and retrospective observational design. CONCLUSIONS: USg AMJL injection is a safe and effective procedure for targeting medial knee pain, particularly in the settings of obesity and prior failed superolateral and suprapatellar knee injections. Further investigation is required to assess long-term clinical outcomes of this injection approach.

Comparative Accuracy of Facial Models Fabricated Using Traditional and 3D Imaging Techniques.

PURPOSE: The purpose of this investigation was to compare the accuracy of facial models fabricated using facial moulage impression methods to the three-dimensional printed (3DP) fabrication methods using soft tissue images obtained from cone beam computed tomography (CBCT) and 3D stereophotogrammetry (3D-SPG) scans. MATERIALS AND METHODS: A reference phantom model was fabricated using a 3D-SPG image of a human control form with ten fiducial markers placed on common anthropometric landmarks. This image was converted into the investigation control phantom model (CPM) using 3DP methods. The CPM was attached to a camera tripod for ease of image capture. Three CBCT and three 3D-SPG images of the CPM were captured. The DICOM and STL files from the three 3dMD and three CBCT were imported to the 3DP, and six testing models were made. Reversible hydrocolloid and dental stone were used to make three facial moulages of the CPM, and the impressions/casts were poured in type IV gypsum dental stone. A coordinate measuring machine (CMM) was used to measure the distances between each of the ten fiducial markers. Each measurement was made using one point as a static reference to the other nine points. The same measuring procedures were accomplished on all specimens. All measurements were compared between specimens and the control. The data were analyzed using ANOVA and Tukey pairwise comparison of the raters, methods, and fiducial markers. RESULTS: The ANOVA multiple comparisons showed significant difference among the three methods (p < 0.05). Further, the interaction of methods versus fiducial markers also showed significant difference (p < 0.05). The CBCT and facial moulage method showed the greatest accuracy. CONCLUSIONS: 3DP models fabricated using 3D-SPG showed statistical difference in comparison to the models fabricated using the traditional method of facial moulage and 3DP models fabricated from CBCT imaging. 3DP models fabricated using 3D-SPG were less accurate than the CPM and models fabricated using facial moulage and CBCT imaging techniques.

The use of a laser-level paralleling device for the fabrication of a unilateral auricular prosthesis.

This article describes the use of a laser-level paralleling device for the fabrication of a unilateral auricular prosthesis. Traditional methods require use of calipers to obtain orientation of contralateral auricular anatomy, which in turn can be difficult to replicate on the patient. The purpose of this clinical report is to describe a simple means to record unilateral auricular anatomy.

Novel magnet-retained prosthetic system for facial reconstruction.

Traumatic facial defects negatively impact speech, mastication, deglutition, dental hygiene, and psychosocial well-being. Reconstruction must address restoration of function and aesthetics to provide quality of life. This report describes soft-tissue reconstruction using a novel magnet-retained facial prosthesis without osseointegrated abutments, performed in a patient after traumatic loss of the entire left lower part of the face, including lips, commissure, and mentum. This reconstructive technique successfully addressed the cosmetic defect while also restoring function with respect to speech and oral nutrition. For this reason, magnet-retained facial prosthesis should be added to free tissue transfer and regional flaps as a reasonable option in the reconstructive algorithm for complex soft-tissue defects of the lower face.

Reliable and repeatable centric relation adjustment of the maxillary occlusal device.

This technique article describes a quantifiable, repeatable, and reliable method for occlusal device adjustment in centric relation using a leaf gauge. In addition, specific suggestions for occlusal device design are provided to enhance patient comfort with the prosthesis in place.

One-way valved speech bulb obturator using a tracheoesophageal prosthesis.

This article describes the fabrication procedures to create a one-way valved speech bulb obturator.

Laser-welded hollow pontic full-gold fixed dental prosthesis.

This article describes a technique for the fabrication of a laser-welded hollow pontic full-gold fixed dental prosthesis. Reference to any specific commercial products, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the U.S. Government. The opinions of the authors expressed herein do not necessarily state or reflect those of the U.S. Government, and shall not be used for advertising or product endorsement purposes.

Fabrication of a functionally generated, implant-retained fixed partial denture.

Partially edentulous patients are frequently restored with implant-supported restorations between and opposing natural teeth. Differences in horizontal and vertical mobility of teeth and dental implants necessitate occlusal contact modification to create prostheses that harmonize with the opposing dentition. This article describes a functionally generated path technique to achieve optimal articulation between an implant-retained fixed partial denture and the patient's dentition.