Impact of temperature on gluconic acid production during acetification by Acetobacter aceti.

The current approach to gluconic acid production is acetification at 30°C, a temperature that can be difficult to maintain in tropical countries. This study investigated the production of gluconic acid during acetification by Acetobacter aceti WK at high temperatures. An acid-tolerant and thermotolerant species, A. aceti WK, was used for acetification at three different temperatures, namely, 30°C (normal temperature), 37°C, and 40°C (high temperature). Acetification was performed in a 100 L bioreactor with 0.15% CaCl2 for protection of the cells against high temperatures. The production of the organic acids, that is, acetic acid, gluconic acid, 2-keto gluconic acid, glucuronic acid, citric acid, succinic acid, lactic acid, and formic acid, was analyzed. Under acetification in the target total concentration of 80 g/L, the highest acetic acid content (39.3 g/L) was obtained at 37°C with an acetification rate of 0.3013 g/L/h, while the acetic acid content and acetification rate achieved at 30°C were 31 g/L and 0.3089 g/L/h, respectively. Additionally, gluconic acid presented at the highest concentration of 2.17 g/L. The rate of production of gluconic acid was 0.0169 g/L/h at 37°C. This acetification process at 37°C will be valuable as an alternative source for gluconic acid production for commercial applications.

Development of Bioactive Opuntia ficus-indica Edible Films Containing Probiotics as a Coating for Fresh-Cut Fruit.

Bioactive edible films have received more attention in recent years as a method for food preservation with value-added functions. The aim of this study was to develop a bioactive edible film containing mucilage of cactus (Opuntia ficus-indica) and incorporating the probiotic strain Enterococcus faecium FM11-2 as an active component to promote consumer health benefits. Opuntia ficus-indica is rich in nutritional and bioactive compounds and the abundance of this cactus makes it attractive for food applications. Mucilage of Opuntia ficus-indica contained 0.47 ± 0.06 mg/g total sugar, 0.33 ± 0.06 mg AGE/mL phenolic content, 0.14 mg/ mL vitamin C, and possessed 35.51 ± 1.88% DPPH scavenging activity. The edible film that was developed exhibited the following characteristics: thickness of 0.02-0.11 mm, percent moisture content 0.19-0.24%, water solubility 30.66-59.41% and water vapor permeability of 0.15-1.5 g·mm/m2·min·kpa, while the range of the variation depended on the type of plasticizer used (either sorbitol or glycerol). The addition of sorbitol in the film provided the maximum mechanical strength based on the evaluation of tensile strength, Young's modulus and elongation at break (44.71 ± 0.78 MPa, 113.22 ± 0.23 MPa and 39.47 ± 0.61%, respectively). The optimal formulation of the edible film, according to the physicochemical, physical and maintenance of fresh-cut apple slices, contained cactus mucilage, gelatin, glycerol and a probiotic. The incorporation of a probiotic into the cactus film created a bioactive edible film that could provide a health benefit. While improvement is needed to maintain the survival rate of the probiotic, this work presents an exciting method for furthering the study of food preservation with edible films.

Active Thermoplastic Starch Film with Watermelon Rind Extract for Future Biodegradable Food Packaging.

Petrochemical plastic wastes generate serious environmental problems because they are resistant to natural decomposition. The aim of this study was to develop a biodegradable active thermoplastic film composed of polyvinyl alcohol (PVA), corn starch (ST), glycerol, and the active compounds from watermelon rind extract (WMRE), or PVA/ST/WMRE, using the casting technique. The film was examined for its mechanical, antioxidant, and functional properties against selected foodborne pathogens. The results showed that the addition of 10% v/v of watermelon rind extract to the film formulation significantly increased the tensile strength from 19.44 ± 0.84 MPa to 33.67 ± 4.38 MPa and slightly increased the percent elongation at break (% EAB) from 35.04 ± 0.96% to 35.16 ± 1.08%. The antioxidant property of PVA/ST/WMRE film was analyzed based on the DPPH scavenging activity assay, which significantly increased from 29.21 ± 0.24% to 63.37 ± 4.27%. The minimum inhibitory concentration (MIC) of watermelon rind extract was analyzed for the growth inhibition of Bacillus cereus ATCC 11778, Escherichia coli ATCC 8739, and Salmonella enterica subsp. enterica serovar Typhimurium ATCC 13311, with 10% (v/v) found as an optimal concentration against B. cereus. Wrapping fresh-cut purple cabbage with PVA/ST/WMRE film significantly reduced the microbial load after 3 days of storage, in comparison to commercial packaging (PET) and thermoplastic control film. Consumer testing of the packaging film indicated that user acceptance of the product was favorable. Therefore, we suggest that this newly developed film can be used as a biodegradable food packaging item that will lead to enhanced food safety, food quality, prolonged shelf life, and consumer acceptance for further food applications.