Correction to "Prospective Life Cycle Assessment of Lithium-Sulfur Batteries for Stationary Energy Storage".

[This corrects the article DOI: 10.1021/acssuschemeng.3c00141.].

A comparison between two full-scale MBR and CAS municipal wastewater treatment plants: techno-economic-environmental assessment.

A holistic assessment procedure has been used in this study for comparing conventional activated sludge (CAS) and membrane bioreactor (MBR) processes for the treatment of municipal wastewater. Technical, social, administrative, economic and environmental impacts have been evaluated based on 1 year of operational data from three full-scale lines (one MBR and two CAS) working in parallel in a large municipal treatment plant. The comparative assessment evidences a slight advantage of the conventional process in the studied case, essentially due to lower costs, complexity and energy consumption. On the other hand, the MBR technology has a better social acceptance and similar overall environmental footprint. Although these results are influenced by site-specific parameters and cannot be generalized, the assessment procedure allowed identifying the most important factors affecting the final scores for each technology and the main differences between the compared technologies. Local conditions can affect the relative importance of the assessed impacts, and the use of weighting factors is proposed for better tailoring the comparative assessment to the local needs and circumstances. A sensitivity analysis on the weighted final scores demonstrated how local factors are very important and must be carefully evaluated in the decision making process.

A framework for energy use indicators and their reporting in life cycle assessment.

Energy use is a common impact category in life cycle assessment (LCA). Many different energy use indicators are used in LCA studies, accounting for energy use in different ways. Often, however, the choice behind which energy use indicator is applied is poorly described and motivated. To contribute to a more purposeful selection of energy use indicators and to ensure consistent and transparent reporting of energy use in LCA, a general framework for energy use indicator construction and reporting in LCA studies will be presented in this article. The framework differentiates between 1) renewable and nonrenewable energies, 2) primary and secondary energies, and 3) energy intended for energy purposes versus energy intended for material purposes. This framework is described both graphically and mathematically. Furthermore, the framework is illustrated through application to a number of energy use indicators that are frequently used in LCA studies: cumulative energy demand (CED), nonrenewable cumulative energy demand (NRCED), fossil energy use (FEU), primary fossil energy use (PFEU), and secondary energy use (SEU). To illustrate how the application of different energy use indicators may lead to different results, cradle-to-gate energy use of the bionanomaterial cellulose nanofibrils (CNF) is assessed using 5 different indicators and showing a factor of 3 differences between the highest and lowest results. The relevance of different energy use indicators to different actors and contexts will be discussed, and further developments of the framework are then suggested. Integr Environ Assess Manag 2016;12:429-436. © 2015 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of SETAC.

Review of Environmental Assessment Case Studies Blending Elements of Risk Assessment and Life Cycle Assessment.

Risk assessment (RA) and life cycle assessment (LCA) are two analytical tools used to support decision making in environmental management. This study reviewed 30 environmental assessment case studies that claimed an integration, combination, hybridization, or complementary use of RA and LCA. The focus of the analysis was on how the respective case studies evaluated emissions of chemical pollutants and pathogens. The analysis revealed three clusters of similar case studies. Yet, there seemed to be little consensus as to what should be referred to as RA and LCA, and when to speak of combination, integration, hybridization, or complementary use of RA and LCA. This paper provides clear recommendations toward a more stringent and consistent use of terminology. Blending elements of RA and LCA offers multifaceted opportunities to adapt a given environmental assessment case study to a specific decision making context, but also requires awareness of several implications and potential pitfalls, of which six are discussed in this paper. To facilitate a better understanding and more transparent communication of the nature of a given case study, this paper proposes a "design space" (i.e., identification framework) for environmental assessment case studies blending elements of RA and LCA. Thinking in terms of a common design space, we postulate, can increase clarity and transparency when communicating the design and results of a given assessment together with its potential strengths and weaknesses.

Life cycle assessment of cellulose nanofibrils production by mechanical treatment and two different pretreatment processes.

Nanocellulose is a bionanomaterial with many promising applications, but high energy use in production has been described as a potential obstacle for future use. In fact, life cycle assessment studies have indicated high life cycle energy use for nanocellulose. In this study, we assess the cradle-to-gate environmental impacts of three production routes for a particular type of nanocellulose called cellulose nanofibrils (CNF) made from wood pulp. The three production routes are (1) the enzymatic production route, which includes an enzymatic pretreatment, (2) the carboxymethylation route, which includes a carboxymethylation pretreatment, and (3) one route without pretreatment, here called the no pretreatment route. The results show that CNF produced via the carboxymethylation route clearly has the highest environmental impacts due to large use of solvents made from crude oil. The enzymatic and no pretreatment routes both have lower environmental impacts, of similar magnitude. A sensitivity analysis showed that the no pretreatment route was sensitive to the electricity mix, and the carboxymethylation route to solvent recovery. When comparing the results to those of other carbon nanomaterials, it was shown that in particular CNF produced via the enzymatic and no pretreatment routes had comparatively low environmental impacts.

Global and local health burden trade-off through the hybridisation of quantitative microbial risk assessment and life cycle assessment to aid water management.

Life cycle assessment (LCA) and quantitative risk assessment (QRA) are commonly used to evaluate potential human health impacts associated with proposed or existing infrastructure and products. Each approach has a distinct objective and, consequently, their conclusions may be inconsistent or contradictory. It is proposed that the integration of elements of QRA and LCA may provide a more holistic approach to health impact assessment. Here we examine the possibility of merging LCA assessed human health impacts with quantitative microbial risk assessment (QMRA) for waterborne pathogen impacts, expressed with the common health metric, disability adjusted life years (DALYs). The example of a recent large-scale water recycling project in Sydney, Australia was used to identify and demonstrate the potential advantages and current limitations of this approach. A comparative analysis of two scenarios - with and without the development of this project - was undertaken for this purpose. LCA and QMRA were carried out independently for the two scenarios to compare human health impacts, as measured by DALYs lost per year. LCA results suggested that construction of the project would lead to an increased number of DALYs lost per year, while estimated disease burden resulting from microbial exposures indicated that it would result in the loss of fewer DALYs per year than the alternative scenario. By merging the results of the LCA and QMRA, we demonstrate the advantages in providing a more comprehensive assessment of human disease burden for the two scenarios, in particular, the importance of considering the results of both LCA and QRA in a comparative assessment of decision alternatives to avoid problem shifting. The application of DALYs as a common measure between the two approaches was found to be useful for this purpose.

Techno-economic and environmental assessment of sewage sludge wet oxidation.

Today, several technologies and management strategies are proposed and applied in wastewater treatment plants (WWTPs) to minimise sludge production and contamination. In order to avoid a shifting of burdens between different areas, their techno-economic and environmental performance has to be carefully evaluated. Wet oxidation (WO) is an alternative solution to incineration for recovering energy in sewage sludge while converting it to mostly inorganic residues. This paper deals with an experimentation carried out within the EU project "ROUTES". A mass balance was made for a WWTP (500,000 person equivalents) in which a WO stage for sludge minimisation was considered to be installed. Both bench- and full-scale test results were used. Design of treatment units and estimation of capital and operational costs were then performed. Subsequently, technical and economic aspects were evaluated by means of a detailed methodology which was developed within the ROUTES project. Finally, an assessment of environmental impacts from a life cycle perspective was performed. The integrated assessment showed that for the specific upgrade considered in this study, WO technology, although requiring a certain increase of technical complexity at the WWTP, may contribute to environmental and economic advantages. The paper provides guidance in terms of which aspects need a more thorough evaluation in relation to the specific case in which an upgrade with WO is considered.

Including pathogen risk in life cycle assessment of wastewater management. 2. Quantitative comparison of pathogen risk to other impacts on human health.

Resource recovery from sewage sludge has the potential to save natural resources, but the potential risks connected to human exposure to heavy metals, organic micropollutants, and pathogenic microorganisms attract stakeholder concern. The purpose of the presented study was to include pathogen risks to human health in life cycle assessment (LCA) of wastewater and sludge management systems, as this is commonly omitted from LCAs due to methodological limitations. Part 1 of this article series estimated the overall pathogen risk for such a system with agricultural use of the sludge, in a way that enables the results to be integrated in LCA. This article (part 2) presents a full LCA for two model systems (with agricultural utilization or incineration of sludge) to reveal the relative importance of pathogen risk in relation to other potential impacts on human health. The study showed that, for both model systems, pathogen risk can constitute an important part (in this study up to 20%) of the total life cycle impacts on human health (expressed in disability adjusted life years) which include other important impacts such as human toxicity potential, global warming potential, and photochemical oxidant formation potential.

Including pathogen risk in life cycle assessment of wastewater management. 1. Estimating the burden of disease associated with pathogens.

The environmental performance of wastewater and sewage sludge management is commonly assessed using life cycle assessment (LCA), whereas pathogen risk is evaluated with quantitative microbial risk assessment (QMRA). This study explored the application of QMRA methodology with intent to include pathogen risk in LCA and facilitate a comparison with other potential impacts on human health considered in LCA. Pathogen risk was estimated for a model wastewater treatment system (WWTS) located in an industrialized country and consisting of primary, secondary, and tertiary wastewater treatment, anaerobic sludge digestion, and land application of sewage sludge. The estimation was based on eight previous QMRA studies as well as parameter values taken from the literature. A total pathogen risk (expressed as burden of disease) on the order of 0.2-9 disability-adjusted life years (DALY) per year of operation was estimated for the model WWTS serving 28,600 persons and for the pathogens and exposure pathways included in this study. The comparison of pathogen risk with other potential impacts on human health considered in LCA is detailed in part 2 of this article series.

Method for technical, economic and environmental assessment of advanced sludge processing routes.

The legislative framework in force in Europe entails restrictive effluent standards for sensitive areas, and quite severe restrictions on the properties of residual sewage sludge, both for landfill disposal and for agricultural use. Several technologies and management strategies have been proposed and applied in wastewater treatment plants to minimise sludge production and contamination. However, their techno-economic and environmental performance has to be carefully evaluated. The ROUTES project, funded within the EU Seventh Framework programme, aims to find new routes for wastewater treatment and sludge management and thereby guide EU members in their future choices. Within this project, the authors have developed and applied a procedure for techno-economic-environmental assessment of new wastewater and sludge processing lines in comparison to reference plants. The reference plants are model conventional plants that experience different types of problems and the new plants are modified plants in which different innovative technologies have been added to solve these problems. The procedure involves a rating of selected technical issues, estimates of operating costs and an assessment of environmental impacts from a life cycle perspective. This paper reports on the procedure and shows examples of results.

Methodological issues in life cycle assessment of mixed-culture polyhydroxyalkanoate production utilising waste as feedstock.

Assessing the environmental performance of emerging technologies using life cycle assessment (LCA) can be challenging due to a lack of data in relation to technologies, application areas or other life cycle considerations, or a lack of LCA methodology that address the specific concerns. Nevertheless, LCA can be a valuable tool in the environmental optimisation in the technology development phase. One emerging technology is the mixed-culture production of polyhydroxyalkanoates (PHAs). PHA production by pure microbial cultures has been developed and assessed in several LCAs during the previous decade. Recent developments within mixed-culture PHA production call for environmental assessment to guide in technology development. Mixed-culture PHA production can use the organic content in wastewater as a feedstock; the production may then be integrated with wastewater treatment (WWT) processes. This means that mixed-culture PHA is produced as a by-product from services in the WWT. This article explores different methodological challenges for LCA of mixed-culture PHA production using organic material in wastewater as feedstock. LCAs of both pure- and mixed-culture PHA production were reviewed. Challenges, similarities and differences when assessing PHA production by mixed- or pure-cultures were identified and the resulting implications for methodological choices in LCA were evaluated and illustrated, using a case study with mixed- and pure-culture PHA model production systems, based on literature data. Environmental impacts of processes producing multiple products or services need to be allocated between the different products or services. Such situations occur both in feedstock production and when the studied system is providing multiple functions. The selection of allocation method is shown to determine the LCA results. The type of data used, for electricity in the energy system, is shown to be important for the results, which indicates, a strong regional dependency of results for systems with electricity use as an environmental hot spot. The importance of assessing water use, an environmental impact not assessed by any of the reviewed studies, is highlighted.

Life cycle assessment of pig slurry treatment technologies for nutrient redistribution in Denmark.

Animal slurry management is associated with a range of impacts on fossil resource use and the environment. The impacts are greatest when large amounts of nutrient-rich slurry from livestock production cannot be adequately utilised on adjacent land. To facilitate nutrient redistribution, a range of different technologies are available. This study comprised a life cycle assessment of the environmental impacts from handling 1000 kg of pig slurry ex-animal. Application of untreated pig slurry onto adjacent land was compared with using four different treatment technologies to enable nutrient redistribution before land application: (a) separation by mechanical screw press, (b) screw press separation with composting of the solid fraction, (c) separation by decanter centrifuge, and (d) decanter centrifuge separation with ammonia stripping of the liquid fraction. Emissions were determined based on a combination of values derived from the literature and simulations with the Farm-N model for Danish agricultural and climatic conditions. The environmental impact categories assessed were climate change, freshwater eutrophication, marine eutrophication, terrestrial acidification, natural resource use, and soil carbon, nitrogen and phosphorus storage. In all separation scenarios, the liquid fraction was applied to land on the pig-producing (donor) farm and the solid fraction transported to a recipient farm and utilised for crop production. Separation, especially by centrifuge, was found to result in a lower environmental impact potential than application of untreated slurry to adjacent land. Composting and ammonia stripping either slightly increased or slightly decreased the environmental impact potential, depending on the impact category considered. The relative ranking of scenarios did not change after a sensitivity analysis in which coefficients for field emissions of nitrous oxide, ammonia and phosphorus were varied within the range cited in the literature. Therefore, the best technology to implement in a given situation depends on the environmental problem in question, local policy, cost and practicality.

Environmental assessment of supercritical water oxidation and other sewage sludge handling options.

Sustainable development relies on the eco-efficient use of all flows in society; more value created out of each resource unit. Supercritical water oxidation (SCWO) can be used for treatment of wet organic waste. The technology has been under development for over 20 years but has not yet been fully commercialized. SCWO allows for complete oxidation of all organics in sewage sludge and almost complete recovery of the inherent energy, essentially without harmful emissions. In this paper, a life-cycle assessment (LCA) of sewage sludge SCWO (Aqua-Critox) is presented and the results are compared with LCA results for other sludge handling options: agricultural use, co-incineration with municipal solid waste, incineration with subsequent phosphorus extraction (Bio-Con) and sludge fractionation with phosphorus recovery (Cambi-KREPRO). For SCWO, beneficial utilization of the heat of reaction is of crucial importance for the outcome. The electricity consumed by pumping and the nitrous oxide produced are other important parameters. The best sludge handling option from an environmental point of view depends on what aspect is considered more important in the impact assessment. Regarding global warming, the energy recovery methods perform better than agricultural use.

Determination of dicumyl peroxide in workplace air.

A method for the determination of dicumyl peroxide in workplace air was developed and applied. Micro-impinger bottles and personal air sampling pumps were used for the sampling. Gas chromatography/mass spectrometry was used for the analytical separation and quantitative determination. The technique makes it possible to monitor peroxide concentrations down to 5 micro g/m(3) in air.