Combined anaerobic-ozonation process for treatment of textile wastewater: removal of acute toxicity and mutagenicity.

A novel set up composed of an anaerobic biofilm reactor followed by ozonation was used for treatment of artificial and real textile effluents containing azo dyes. The biological treatment efficiently removed chemical oxygen demand and color. Ozonation further reduced the organic content of the effluents and was very important for the degradation of aromatic compounds, as shown by the reduction of UV absorbance. The acute toxicity toward Vibrio fischeri and the shrimp Artemia salina increased after the biological treatment. No toxicity was detected after ozonation with the exception of the synthetic effluent containing the highest concentration, 1 g/l, of the azo dye Remazol Red. Both untreated and biologically treated textile effluents were found to have mutagenic effects. The mutagenicity increased even further after 1 min of ozonation. No mutagenicity was however detected in the effluents subjected to longer exposure to ozone. The results of this study suggest that the use of ozonation as short post-treatment after a biological process can be beneficial for the degradation of recalcitrant compounds and the removal of toxicity of textile wastewater. However, monitoring of toxicity and especially mutagenicity is crucial and should always be used to assess the success of a treatment strategy.

Leachability testing of sludge from street gullies.

Sludge from gullies, on two types of streets with different traffic intensity, was investigated using two recommended EU methods for leachability testing of waste: a two-stage batch test and an up-flow percolation test. The main purpose of this investigation was to gain more knowledge about these leaching test methods to be able to make future decisions on the general applicability of the proposed tests. A number of parameters were determined in the sludge as well as in the eluates obtained from the two leaching tests. These include pH, conductivity, dissolved organic carbon and inorganic ions as chloride ions. A number of metals as Cd, Cr, Cu, Hg, Ni and Zn, were determined by inductive coupled plasmamass spectrometry and organic compounds were screened by high performance liquid chromatography-diode array UV detection and gas chromatography-mass spectrometry. It was found that the concentrations of metals and organic compounds in the sludge were several orders of magnitudes higher than the actual eluate concentrations. For all metals the concentrations were well below the proposed limit values for non-hazardous waste included in the Council decision document 2003/33/EC. Generally, concentrations obtained in batch test were equal or higher than from percolation tests. The repeatability of the percolation and the batch test were in average 28 and 17%, respectively.

Leachability testing of metallic wastes.

The performance of two tests, a batch test and a percolation test for the characterization of waste as suggested in the EU council decision 2003/33/EC was investigated. The tests were carried out on two solid waste streams from a metal recycling industry. The concentrations of heavy metals such as Cu, Zn and Pb were more than one order of magnitude lower than the proposed limit values. Generally, batch test values were equal or higher than percolation test values. With the proposed test procedures both materials could be considered as non-dangerous wastes. The test performance was also investigated using a leachant with higher ionic strength instead of demineralized water as prescribed. The results clearly show a significant increase in the concentration of some heavy metals. Total concentrations of phenolic compounds and polychlorinated biphenyls were less than 1 p.p.m. and 2 p.p.b., respectively. The precision of the batch and the percolation tests were on average 48 and 35%, respectively.