Polyaniline based material as a new SPE sorbent for pre-treatment of Chelidonium majus extracts before chromatographic analysis of alkaloids.

In the present study, deprotonated and protonated polyaniline based sorbent obtained by in situ polymerization of aniline on silica (Si-PANI) was applied for SPE pretreatment of Chelidonium majus extracts before determination of benzophenanthridine, protoberberine and protopine alkaloids. The experimentally optimized conditions, such as protonated polyaniline impregnated with methanol as a sorbent, 2 mL of water and methanol mixture (1/1, v/v) as a washing solution, and 5 mL of 0.1 M methanolic solution of ammonia as an elution solvent, yielded the highest values of analyte recovery (above 96.5%) with simultaneous removal of undesirable plant matrix. Virtually modeled structure of polyaniline revealed possible occurrence of the mixed mode binding mechanism, based both on π-π and ion interactions on protonated form of polyaniline. Moreover, lack of significant changes of the polyaniline film quality assessed by Raman spectroscopy after series of ten experiments proved the reusability of the sorbent.

Micro Thin-Layer Chromatography Fingerprints of Selected Basil Species and Their Chemometric Analysis.

The dried aerial parts of 12 plants of Ocimum spp. were extracted with the Soxhlet apparatus using dichloromethane and methanol as solvents. A micro-TLC system with silica and a normal-phase solvent system (propan-2-ol-n-heptane-formic acid) was used for the chemometric analysis of 12 selected basil methanolic extracts. Some indices of similarity (Pearson's correlation coefficient, determination coefficient, congruence coefficient, and Euclidean, Manhattan (city-block), Chebyshev, and Hausdorff distances) were calculated on the basis of thin-layer chromatograms using ImageJ software. Principal component analysis was also performed. The method allowed the comparison of the analyzed extracts and confirmed the identities of two selected unknown plants.

Lipophilicity Studies on Thiosemicarbazide Derivatives.

The lipophilicity of two series of thiosemicarbazide derivatives was assessed by the RP-HPLC method with the RP-18 chromatographic column and the methanol-water mixture as the mobile phase. Distribution coefficients logPHPLC were compared to calculated values generated by commonly used AClogP software and quantum chemical calculations. The reliability of the predictions was evaluated using the correlation matrix and PCA. For 4-benzoylthiosemicarbazides, a high correlation between theoretical and experimental logP parameters was obtained using the XlogP3 algorithm, while for 4-aryl/(cyclohexyl)thiosemicarbazides, the XlogP2 parameter was strongly correlated with the experimentally obtained logP.

Comparison of Analytical Methods in Chemometric Fingerprinting of Metallicolous and Non-metallicolous Populations of Echium vulgare L.

INTRODUCTION: Adverse environmental conditions usually change plant biochemical pathways resulting in accumulation or decreased content of both primary and secondary metabolites. The chemometric fingerprinting analysis proves to be a useful tool to reveal phytochemical differentiation between plants inhabiting heavy metal-contaminated and uncontaminated areas. OBJECTIVE: Development and assessment of four analytical techniques - high performance capillary electrophoresis (HPCE), thin-layer chromatography (TLC), mass spectrometry (MS), and Fourier transform infrared (FTIR) spectroscopy in chemometric fingerprinting of metallicolous and non-metallicolous populations of Echium vulgare L. MATERIAL AND METHODS: Twenty-one crude methanol extracts of shoot samples representing three populations of Echium vulgare L., two originating from highly metal polluted areas and one from an unpolluted area, were investigated using four analytical methods: HPCE, TLC, MS, and FTIR spectroscopy. Data pre-processing (denoising, background subtracting, horizontal alignment) followed by principal component analysis (PCA), hierarchical clustering analysis (HCA), and phytochemical difference index (DI) calculations facilitated exploration of the differences and similarities between the populations. RESULTS: Clear phytochemical divergence between metallicolous and non-metallicolous populations of Echium vulgare was found. The suitability of the analytical techniques for revealing phytochemical markers and discrimination of individuals originating from different populations differed and in general increased in the order: TLC < MS = HPCE < FTIR. CONCLUSION: The chemometric methods applied were successful in discrimination between samples from polluted and unpolluted areas, showing a potential perspective for environmental quality control. Copyright © 2016 John Wiley & Sons, Ltd.

TLC Profiles of Selected Cirsium Species with Chemometrics in Construction of Their Fingerprints.

The dried aerial parts of 12 plants of Cirsium species were extracted with the Soxhlet apparatus using dichloromethane and methanol as solvents. Next, the extracts were separated by TLC methods to obtain the fingerprint chromatograms. The analysis was performed on silica gel or RP-18 layers as stationary phases using the following eluents: ethyl acetate/formic acid/acetic acid/water (12/1.5/1.5/4; v/v) for silica gel, and 5% (v/v) aqueous solution of formic acid/methanol (70/30; v/v) for the first development and the same system in the proportion of 50/50 (v/v) for the second development for RP-18. The double development was applied in the case of RP-18 plates. The analysis was performed for all Cirsium methanolic extracts and five selected standards (naringin, apigenin, rutin, caffeic acid and chlorogenic acid). The results were analyzed using chemometrics. The comparison of individual Cirsium species and the identification of unknown species were performed using the similarity indices (Pearson's correlation coefficient, determination coefficient and congruence coefficient), distance indices (Euclidean distance, Manhattan distance and Chebyshev's distance) and Multi-Scale Structural SIMilarity. Based on chemometric analysis, the first extract of the widely grown species is identified as Cirsium arvense and the second one as Cirsium rivulare.

The Stimulatory Effect of Strontium Ions on Phytoestrogens Content in Glycine max (L.) Merr.

The amount of secondary metabolites in plants can be enhanced or reduced by various external factors. In this study, the effect of strontium ions on the production of phytoestrogens in soybeans was investigated. The plants were treated with Hoagland's solution, modified with Sr(2+) with concentrations ranging from 0.5 to 3.0 mM, and were grown for 14 days in hydroponic cultivation. After harvest, soybean plants were separated into roots and shoots, dried, and pulverized. The plant material was extracted with methanol and hydrolyzed. Phytoestrogens were quantified by HPLC. The significant increase in the concentration of the compounds of interest was observed for all tested concentrations of strontium ions when compared to control. Sr(2+) at a concentration of 2 mM was the strongest elicitor, and the amount of phytoestrogens in plant increased ca. 2.70, 1.92, 3.77 and 2.88-fold, for daidzein, coumestrol, genistein and formononetin, respectively. Moreover, no cytotoxic effects were observed in HepG2 liver cell models after treatment with extracts from 2 mM Sr(2+)-stressed soybean plants when compared to extracts from non-stressed plants. Our results indicate that the addition of strontium ions to the culture media may be used to functionalize soybean plants with enhanced phytoestrogen content.

RP-HPLC analysis and in vitro identification of antimycobacterial activity of novel thiosemicarbazides and 1,2,4-triazole derivatives.

It has been widely recognized that chromatography can be applied to derive parameters useful for anticipation of the pharmacological properties of xenobiotics. The purpose of this study was to evaluate the use of C18 stationary phase in chromatographic experiments as to assess antimycobacterial activity of series of novel thiosemicarbazides and their cyclization products: 1,2,4-triazole derivatives. Chromatographically determined lipophilicity descriptors log k(w), S and φ0 and computer generated molecular descriptors were obtained for 32 compounds and Rifampicin as a representative anti-tuberculosis drug. As experimental parameters were not significantly related to the calculated values, the data were analyzed by the principal component analysis PCA allowing for the extraction of "dipole moment" and "energy due to solvation" as the most powerful parameters from large set of diverse data. The approach ranked the examined analytes as active and inactive against Mycobacterium strains. More significant clustering of examined compounds was achieved by construction of 3D graph relating computational (dipole moment, energy due to solvation) and experimental log k(w) (MeOH) descriptors. It was proved that lack of substituent in the C5 position in the triazole ring appears to be characteristic for active derivatives. Provided conclusions can be taken into account in planning further synthesis of new derivatives with antimycobacterial activity.

Physicochemical properties of silica gel coated with a thin layer of polyaniline (PANI) and its application in non-suppressed ion chromatography.

Physicochemical properties of a new sorbent and its potential application in non-suppressed ion chromatography (IC) have been investigated. The sorbent was obtained in a process of covering silica gel particles with a film of polyaniline (PANI). The properties of silica modified with polyaniline such as particle size, porosity, average quantity of polyaniline covering carrier and density of sorbent were determined. In our study the following methods were used: microscopic analysis, laser diffraction technique, combustion analysis, mercury porosimetry and helium pycnometry. Column with the newly obtained packing was used for the separation of inorganic anions. Optimized chromatographic system was successfully employed for analysis of iodide and bromide in selected pharmaceutical products (Bochnia salt and Iwonicz salt) applied in chronic respiratory disease. Analysis was carried out using 0.1M solution of HCl in mixture of methanol/water (50:50v/v) as a mobile phase; the flow rate was 0.3 mL min(-1), temperature was 24°C and λ=210 nm. Validation parameters such as correlation coefficient, RSD values, recovery, detection and quantification limits were found to be satisfactory.

Two-dimensional thin layer chromatographic separation of phenolic compounds from Eupatorium cannabinum extracts and their antioxidant activity.

Two dimensional thin layer chromatography on DIOL polar bonded stationary phase was performed to optimize the separation of some anioxidant phenolic compounds from Eupatorium cannabinum extracts. Ethyl-methyl ketone mixed with n-heptane and ethyl acetate mixed with n-heptane were used as non-aqueous mobile phases in normal phase separations (1st direction of development in 2D-HPTLC mode) and methanol mixed with water was used as a mobile phase in reversed phase (2nd direction of development in 2D-HPTLC mode). The plates were sprayed by use of Merck TLC sprayer using 2-(diphenylboryoxy)-ethylamine and PEG4000 (Merck, Darmstadt, Germany) or DPPH and photographed in Camag Cabinet UV lamp at 254 nm and 365 nm by use of Fuji 8 mpx camera. Satisfactory separations of antioxidant phenolic compounds in Eupatorium cannabinum extracts were obtained by use of optimized 2D-HPTLC systems.

Lipophilicity of novel antitumour and analgesic active 8-aryl-2,6,7,8-tetrahydroimidazo[2,1-c][1,2,4]triazine-3,4-dione derivatives determined by reversed-phase HPLC and computational methods.

Eight novel antitumour and analgesic active 8-aryl-2,6,7,8-tetrahydroimidazo[2,1-c][1,2,4]triazine-3,4-diones (1-8) have been obtained as a bioactive set of substances and their lipophilicity has been studied. The logk values of fifteen reference compounds and eight newly synthesised imidazotriazine-3,4-dione derivatives were determined by reversed-phase high performance liquid chromatography (RP-HPLC) using mixtures of methanol and water as mobile phases with different methanol concentrations. The relationships between logk values of a set of reference compounds (fifteen compounds) and investigated ones (eight compounds) and concentration of methanol was used for determination of the logkwater values by extrapolation. The partition coefficients (logP) values for reference compounds measured experimentally were taken from the literature. The calibration equation was then obtained for the standards of known lipophilicity (logPHPLC) and logkwater. In next step the partition coefficients of new synthesised solutes were calculated from the calibration equation. For the comparison purpose, additionally the partition coefficients (logPcalc.) of the examined imidazotriazine-3,4-diones were calculated by means of the Pallas 3.1.1.2. software. It was found that logkwater values as a lipophilicity measure of derivatives correlate well with partition coefficients measured experimentally (logPHPLC). Correlation between the logPHPLC and the logarithm of partition coefficient calculated by Pallas software (logPcalc.) is not so satisfactory as that for values determined experimentally. Furthermore, it has been found that the lipophilicity variation of investigated imidazotriazine-3,4-diones (1-8) correlates well with their acute toxicity expressed as log(1/LD50). The drug-likeness of all the bioactive 8-aryl-2,6,7,8-tetrahydroimidazo[2,1-c][1,2,4]triazine-3,4-diones was assessed on the basis of their structural properties by applying Lipniski's rule of five. The solutes have all four parameters important for the favourable pharmacokinetics in the human body that would make them likely orally active drugs in humans.