A review of the management of water resources in Malaysia facing climate change.

This paper reviewed the impacts of climate change on the management of the water sector in Malaysia discussing the current status of water resources, water service, and water-related disasters. The implementation of engineering practices was discussed to provide the detailed assessment of climate change impacts, risks, and adaptation for sustainable development. The narrative methods of reviewing the literatures were used to get an understanding on the engineering practices of water infrastructures, implication of the government policies, and several models as the main motivation behind the concept of integrated water resource management to contribute as part of the sustainable development goals to achieve a better and more sustainable future for all. The findings of this review highlighted the impacts of climate change on the rivers, sea, lakes, dams, and groundwater affecting the availability of water for domestic and industrial water supplies, irrigation, hydropower, and fisheries. The impacts of climate change on the water-related disasters have been indicated affecting drought-flood abrupt alternation and water pollution. Challenges of water management practices facing climate change should be aware of the updated intensity-duration-frequency curves, alternative sources of water, effective water demand management, efficiency of irrigation water, inter-basin water transfer, and nonrevenue water. The transferability of this review findings contribute to an engagement with the society and policy makers to mobilize for climate change adaptation in the water sector.

Column-based removal of high concentration microplastics in synthetic wastewater using granular activated carbon.

Microplastic (MP) is an emerging contaminant of concern due to its abundance in the environment. Wastewater treatment plant (WWTP) can be considered as one of the main sources of microplastics in freshwater due to its inefficiency in the complete removal of small MPs. In this study, a column-based MP removal which could serve as a tertiary treatment in WWTPs is evaluated using granular activated carbon (GAC) as adsorbent/filter media, eliminating clogging problems commonly caused by powder form activated carbon (PAC). The GAC is characterized via N2 adsorption-desorption isotherm, field emission scanning electron microscopy, and contact angle measurement to determine the influence of its properties on MP removal efficiency. MPs (40-48 µm) removal up to 95.5% was observed with 0.2 g/L MP, which is the lowest concentration tested in this work, but still higher than commonly used MP concentration in other studies. The performance is reduced with further increase in MP concentration (up to 1.0 g/L), but increasing the GAC bed length from 7.5 to 17.5 cm could lead to better removal efficiencies. MP particles are immobilized by the GAC predominantly by filtration process by being entangled with small GAC particles/chips or stuck between the GAC particles. MPs are insignificantly removed by adsorption process through entrapment in GAC porous structure or attachment onto the GAC surface.

Insights into the potential application of magnetic field in controlling sludge bulking and foaming: A review.

The formation of bulking and foaming in biological wastewater treatment could cause a series of operational issues with biomass and effluent quality, ultimately affect the treatment performance of the system. The essential parameters influencing the growth of bulking and foaming bacteria are comprehensively summarised in this paper. Existing bulking and foaming control approached are critically reviewed and addressed, as well as their drawbacks and limitations. Despite the abundance of information and implementation, a complete control technique for limiting filamentous sludge bulking and foaming remains insufficient. Magnetic field application is emphasised as a viable control strategy in this regard. The present review study provides new insight of this application by comparing the use of magnetic fields to conventional treatments. Future outlooks on the use of magnetic fields to prevent BFB proliferation were also highlighted.

Development of a novel and efficient biochar produced from pepper stem for effective ibuprofen removal.

A potential biochar from pepper stems (PS-biochar) was developed via a one-stage pyrolysis process of precursor at 700 °C and employed to adsorb ibuprofen (IBP) in water media. Results showed that PS-biochar was a carbonaceous mesoporous adsorbent with well-developed porosity (SBET = 727.5 m2/g and VTotal = 0.36 cm3/g) and rich surface functional groups. Mechanism of IBP adsorption consisted mainly of π- π interaction, pore filling, and H-bonding. The Langmuir monolayer capacity (569.6 mg/g) was very high compared to values reported in similar studies. The successful PS-biochar regeneration after four cycles in the batch system confirmed the high performance of the NaOH (0.1 M) as a desorbing agent. Therefore, the prepared biochar can be considered as a cost-effective and high-performance material for water decontamination.

Bioremediation of micropollutants using living and non-living algae - Current perspectives and challenges.

The emergence and continual accumulation of industrial micropollutants such as dyes, heavy metals, organic matters, and pharmaceutical active compounds (PhACs) in the ecosystem pose an alarming hazard to human health and the general wellbeing of global flora and fauna. To offer eco-friendly solutions, living and non-living algae have lately been identified and broadly practiced as promising agents in the bioremediation of micropollutants. The approach is promoted by recent findings seeing better removal performance, higher efficiency, surface area, and binding affinity of algae in various remediation events compared to bacteria and fungi. To give a proper and significant insight into this technology, this paper comprehensively reviews its current applications, removal mechanisms, comparative efficacies, as well as future outlooks and recommendations. In conducting the review, the secondary data of micropollutants removal have been gathered from numerous sources, from which their removal performances are analyzed and presented in terms of strengths, weaknesses, opportunities, and threats (SWOT), to specifically examine their suitability for selected micropollutants remediation. Based on kinetic, isotherm, thermodynamic, and SWOT analysis, non-living algae are generally more suitable for dyes and heavy metals removal, meanwhile living algae are appropriate for removal of organic matters and PhACs. Moreover, parametric effects on micropollutants removal are evaluated, highlighting that pH is critical for biodegradation activity. For selective pollutants, living and non-living algae show recommendable prospects as agents for the efficient cleaning of industrial wastewaters while awaiting further supporting discoveries in encouraging technology assurance and extensive applications.

Advances in pretreatment technology for handling the palm oil mill effluent: Challenges and prospects.

The palm oil mill effluent (POME) from palm milling oil activities is discharged into various water bodies which poses several environmental problems including turbidity, increases COD and BOD, adds oil and grease, increases total nitrogen, and other pollutants. Therefore, it requires effective treatment to remove the pollutants before disposal. The objective was to critically discuss the performance of POME pretreatments along with their limitations. To offer a coverage on the present less efficient technologies, the opportunities and challenges of advanced pretreatments that combine magnetic materials and natural composites as adsorbents are comprehensively reviewed here. Moreover, potential of various magnetic materials for POME pretreatment has been described. Several existing pretreatment methods such as physical pretreatments, chemical pretreatments, coagulation-flocculation, and adsorption can remove pollutant content from POME with certain limitations and the use of magnetic composite adsorbents can enhance the treatment efficiency.

Untargeted metabolomics of the alkaliphilic cyanobacterium Plectonema terebrans elucidated novel stress-responsive metabolic modulations.

Alkaliphilic cyanobacteria are suitable candidates to study the effect of alkaline wastewater cultivation on molecular metabolic responses. In the present study, the impact of wastewater, alkalinity, and alkaline wastewater cultivation was studied on the biomass production, biochemical composition, and the alkalinity responsive molecular mechanism through metabolomics. The results suggested a 1.29 to 1.44-fold higher biomass production along with improved lipid, carbohydrate, and pigment production under alkaline wastewater cultivation. The metabolomics analysis showed 1.2-fold and 5.54-fold increase in the indole-acetic acid and phytoene biosynthesis which contributed to overall enhanced cell differentiation and photo-protectiveness. Furthermore, lower levels of Ribulose-1,5-bisphosphate (RuBP), and higher levels of 2-phosphoglycerate and 3-phosphoglycerate suggested the efficient fixation of CO2 into biomass, and storage compounds including polysaccharides, lipids, and sterols. Interestingly, except L-histidine and L-phenylalanine, all the metabolites related to protein biosynthesis were downregulated in response to wastewater and alkaline wastewater cultivation. The cells protected themselves from alkalinity and nutrient stress by improving the biosynthesis of sterols, non-toxic antioxidants, and osmo-protectants. Alkaline wastewater cultivation regulated the activation of carbon concentration mechanism (CCM), glycolysis, fatty-acid biosynthesis, and shikimate pathway. The data revealed the importance of alkaline wastewater cultivation for improved CO2 fixation, wastewater treatment, and producing valuable bioproducts including phytoene, Lyso PC 18:0, and sterols. These metabolic pathways could be future targets of metabolic engineering for improving biomass and metabolite production. SIGNIFICANCE: Alkalinity is an imperative factor, responsible for the contamination control and biochemical regulation in cyanobactera, especially during the wastewater cultivation. Currently, understanding of alkaline wastewater responsive molecular mechanism is lacking and most of the studies are focused on transcriptomics of model organisms for this purpose. In this study, untargeted metabolomics was employed to analyze the impact of wastewater and alkaline wastewater on the growth, CO2 assimilation, nutrient uptake, and associated metabolic modulations of the alkaliphilic cyanobacterium Plectonema terebrans BERC10. Results unveiled that alkaline wastewater cultivation regulated the activation of carbon concentration mechanism (CCM), glycolysis, fatty-acid biosynthesis, and shikimate pathway. It indicated the feasibility of alkaline wastewater as promising low-cost media for cyanobacterium cultivation. The identified stress-responsive pathways could be future genetic targets for strain improvement.

Advances in developing metabolically engineered microbial platforms to produce fourth-generation biofuels and high-value biochemicals.

Producing bio-based chemicals is imperative to establish an eco-friendly circular bioeconomy. However, the compromised titer of these biochemicals hampers their commercial implementation. Advances in genetic engineering tools have enabled researchers to develop robust strains producing desired titers of the next-generation biofuels and biochemicals. The native and non-native pathways have been extensively engineered in various host strains via pathway reconstruction and metabolic flux redirection of lipid metabolism and central carbon metabolism to produce myriad biomolecules including alcohols, isoprenoids, hydrocarbons, fatty-acids, and their derivatives. This review has briefly covered the research efforts made during the previous decade to produce advanced biofuels and biochemicals through engineered microbial platforms along with the engineering approaches employed. The efficiency of the various techniques along with their shortcomings is also covered to provide a comprehensive overview of the progress and future directions to achieve higher titer of fourth-generation biofuels and biochemicals while keeping environmental sustainability intact.

Role of anaerobic sludge digestion in handling antibiotic resistant bacteria and antibiotic resistance genes - A review.

Currently, anaerobic sludge digestion (ASD) is considered not only for treating residual sewage sludge and energy recovery but also for the reduction of antibiotic resistance genes (ARGs). The current review highlights the reasons why antibiotic resistant bacteria (ARB) and ARGs exist in ASD and how ASD performs in the reduction of ARB and ARGs. ARGs and ARB have been detected in ASD with some reports indicating some of the ARGs can be completely removed during the ASD process, while other studies reported the enrichment of ARB and ARGs after ASD. This paper reviews the performance of ASD based on operational parameters as well as environmental chemistry. More studies are needed to improve the performance of ASD in reducing ARGs that are difficult to handle and also differentiate between extracellular (eARGs) and intracellular ARGs (iARGs) to achieve more accurate quantification of the ARGs.

Decolorization kinetics and mass transfer mechanisms of Remazol Brilliant Blue R dye mediated by different fungi.

The release of synthetic dye into the environment causing abnormal growth of phytoplankton may lead to a decline in the photosynthetic performance of aquatic ecosystem. Scientific knowledge of Remazol Brilliant Blue R (RBBR) decolorization is essential for designing the engineered bioremediation systems of employing fungal mycelium. The biodegradation of RBBR dye mediated by an appropriate fungus was analyzed using the modified mass transfer factor models to get better understanding on the decolorization kinetics and mechanisms of external and internal mass transfer. The results showed that the limited capacities of the kinetic and isotherm models are still not able to comprehensively explain many important phenomena of RBBR decolorization mediated by the T. citrinoviride, T. koningiopsis and Pestalotiopsis sp. strains. The rate-limiting step of RBBR decolorization depends on the EMT resistance and the vegetative growth rates of T. citrinoviride, T. koningiopsis and Pestalotiopsis sp. strains can be described by second-order polynomial equation. The analysis of decolorization performance may provide a new insight on the role of fungus in the degradation of RBBR dye.

Exploring the potential of halotolerant bacteria for biodegradation of polycyclic aromatic hydrocarbon.

The present study aimed to determine the degradation and transformation of three-ring PAHs phenanthrene and anthracene by Cryptococcus sp. MR22 and Halomonas sp. BR04 under halophilic conditions. The growth progress of Cryptococcus sp. MR22 and Halomonas sp. BR04 on anthracene and phenanthrene was monitored by colony-forming unit (CFU) technique. The growth of the bacteria was maintained at a maximum concentration of 200 mg/L of all tested hydrocarbon, indicating that Cryptococcus sp. MR22 and Halomonas sp. BR04 significantly perform in the removal of the PAH-contaminated medium at low concentrations. The fit model to represent the biodegradation kinetics of both PAHs was first-order rate equation The extract prepared from cells supplemented with three different substrates exhibited some enzymes such as hydroxylase, dioxygenase, laccase and peroxidase. The results suggest that both strains had an impressive ability in the degradation of aromatic and aliphatic hydrocarbon but also could tolerate in the extreme salinity condition.

Decolorization and biotransformation pathway of textile dye by Cylindrocephalum aurelium.

Due to environmental concern, the research to date has tended to focus on how textile dye removal can be carried out in a greener manner. Therefore, this study aims to evaluate the decolorization and biotransformation pathway of Mordant Orange-1 (MO-1) by Cylindrocephalum aurelium RY06 (C. aurelium RY06). Decolorization study was conducted in a batch experiment including the investigation of the effects of physio-chemical parameters. Enzymatic activity of C. aurelium RY06 during the decolorization was also investigated. Moreover, transformation and biodegradation of MO-1 by C. aurelium RY06 were observed using the gas chromatography-mass spectrometry. Manganese peroxidase, lignin peroxidase, laccase, 1,2-dioxygenase, and 2,3-dioxygenase enzymes were detected during the decolorization. In general, the present work concluded that the MO-1 was successfully degraded by C. aurelium RY06 and transformed to be maleic acid and to be isophtalic acid.

Characterization of pyrene and chrysene degradation by halophilic Hortaea sp. B15.

Polycyclic aromatics hydrocarbons (PAHs) are ubiquitous and toxic pollutants that are dangerous to humans and living organism in aquatic environment. Normally, PAHs has lower molecular weight such as phenanthrene and naphthalene that are easy and efficient to degrade, but high-molecular-weight PAHs such as chrysene and pyrene are difficult to be biodegraded by common microorganism. This study investigated the isolation and characterization of a potential halophilic bacterium capable of utilizing two high-molecular-weight PAHs. At the end of the experiment (25-30 days of incubation), bacterial counts have reached a maximum level (over 40 × 1016 CFU/mL). The highest biodegradation rate of 77% of chrysene in 20 days and 92% of pyrene in 25 days was obtained at pH 7, temperature 25 °C, agitation of 150 rpm and Tween 80 surfactant showing to be the most impressive parameters for HMWPAHs biodegradation in this research. The metabolism of initial compounds revealed that Hortaea sp. B15 utilized pyrene to form phthalic acid while chrysene was metabolized to form 1-hydroxy-2-naphthoic acid. The result showed that Hortaea sp. B15 can be promoted for the study of in situ biodegradation of high molecular weight PAH.

Evaluation of the Performance of Helmet Prototypes Fabricated from Acrylonitrile Butadiene Styrene Composites Filled with Natural Resource.

The performance of helmet prototypes fabricated from acrylonitrile butadiene styrene composites filled with oil palm empty fruit bunch fibers was evaluated. The fibers were produced using a milling procedure, while the composites were fabricated using a single-screw extrusion. The physical characteristics of the produced fibers, which are water content, size, and density, were investigated. In addition, the mechanical properties of the produced helmets, including shock absorption, yield stress, frequency, and head injury criterion (HIC), were examined. The impact strength of the produced helmets increases with the rise of filler content. In addition, the helmets were also able to withstand a considerable pressure such that the transmitted pressure was far under the maximum value acceptable by the human skull. The present work also found that HICs exhibited by the investigated helmet prototypes fulfill all the practical guidelines as permitted by the Indonesian government. In terms of novelty, such innovation can be considered the first invention in Indonesia since the endorsement of the use of motorcycle helmets.

Performance of small and large scales rainwater harvesting systems in commercial buildings under different reliability and future water tariff scenarios.

A rainwater harvesting system (RWHS) was proposed for small and large commercial buildings in Malaysia as an alternative water supply for non-potable water consumption. The selected small and large commercial buildings are AEON Taman Universiti and AEON Bukit Indah, respectively. Daily rainfall data employed in this work were obtained from the nearest rainfall station at Senai International Airport, which has the longest and reliable rainfall record (29 years). Water consumption at both buildings were monitored daily and combined with the secondary data obtained from the AEON's offices. The mass balance model was adopted as the simulation approach. In addition, the economic benefits of RWHS in terms of percentage of reliability (R), net present value (NPV), return on investment (ROI), benefit-cost ratio (BCR), and payback period (PBP) were examined. Effects of rainwater tank sizes and water tariffs on the economic indicators were also evaluated. The results revealed that the percentages of reliability of the RWHS for the small and large commercial buildings were up to 93 and 100%, respectively, depending on the size of rainwater tank use. The economic benefits of the proposed RWHS were highly influenced by the tank size and water tariff. At different water tariffs between RM3.0/m3 and RM4.7/m3, the optimum PBPs for small system range from 6.5 to 10.0 years whereas for the large system from 3.0 to 4.5 years. Interestingly, the large commercial RWHS offers better NPV, ROI, BCR, and PBP compared to the small system, suggesting more economic benefits for the larger system.

Application of the kinetic and isotherm models for better understanding of the behaviors of silver nanoparticles adsorption onto different adsorbents.

It is the first time to do investigation the reliability and validity of thirty kinetic and isotherm models for describing the behaviors of adsorption of silver nanoparticles (AgNPs) onto different adsorbents. The purpose of this study is therefore to assess the most reliable models for the adsorption of AgNPs onto feasibility of an adsorbent. The fifteen kinetic models and fifteen isotherm models were used to test secondary data of AgNPs adsorption collected from the various data sources. The rankings of arithmetic mean were estimated based on the six statistical analysis methods of using a dedicated software of the MATLAB Optimization Toolbox with a least square curve fitting function. The use of fractal-like mixed 1, 2-order model for describing the adsorption kinetics and that of Fritz-Schlunder and Baudu models for describing the adsorption isotherms can be recommended as the most reliable models for AgNPs adsorption onto the natural and synthetic adsorbent materials. The application of thirty models have been identified for the adsorption of AgNPs to clarify the usefulness of both groups of the kinetic and isotherm equations in the rank order of the levels of accuracy, and this significantly contributes to understandability and usability of the proper models and makes to knowledge beyond the existing literatures.

Biodegradation of Mordant orange-1 using newly isolated strain Trichoderma harzianum RY44 and its metabolite appraisal.

Herein, we systematically reported the capability of T. harzianum RY44 for decolorization of Mordant orange-1. The fungi strains were isolated from the Universiti Teknologi Malaysia tropical rain forest. For initial screening, the decolorization was conducted using 50 strains of the fungi for 20 days incubation time and the best performance was selected. Then, the decolorization capability and fungal biomass were evaluated using different dye concentrations, namely, 0, 50, 75 and 100 ppm. Effects of the carbon sources (fructose, glucose, and galactose), nitrogen sources (ammonium nitrate, ammonium sulfate and yeast extract), surfactant (tween 80), aromatic compounds (benzoic acid, catechol and salicylic acid), and pH on the decolorization efficiency were examined. This study has found that the employed carbon sources, nitrogen sources, and aromatic compounds strongly enhance the decolorization efficiency. In addition, increasing the surfactant volume and pH generally decreased the decolorization efficiencies from 19.5 to 9.0% and 81.7 to 60.5%, respectively. In the mechanism philosophy, the present work has found that Mordant orange-1 were initially degraded by T. harzianum RY44 to benzoic acid and finally transformed into salicylic acid.

Silver Nanoparticles in the Water Environment in Malaysia: Inspection, characterization, removal, modeling, and future perspective.

The current status of silver nanoparticles (AgNPs) in the water environment in Malaysia was examined and reported. For inspection, two rivers and two sewage treatment plants (STPs) were selected. Two activated carbons derived from oil palm (ACfOPS) and coconut (ACfCS) shells were proposed as the adsorbent to remove AgNPs. It was found that the concentrations of AgNPs in the rivers and STPs are in the ranges of 0.13 to 10.16 mg L-1 and 0.13 to 20.02 mg L-1, respectively, with the highest concentration measured in July. ACfOPS and ACfCS removed up to 99.6 and 99.9% of AgNPs, respectively, from the water. The interaction mechanism between AgNPs and the activated carbon surface employed in this work was mainly the electrostatic force interaction via binding Ag+ with O- presented in the activated carbon to form AgO. Fifteen kinetic models were compared statistically to describe the removal of AgNPs. It was found that the experimental adsorption data can be best described using the mixed 1,2-order model. Therefore, this model has the potential to be a candidate for a general model to describe AgNPs adsorption using numerous materials, its validation of which has been confirmed with other material data from previous works.

Novel Weed-Extracted Silver Nanoparticles and Their Antibacterial Appraisal against a Rare Bacterium from River and Sewage Treatment Plan.

This is the first investigation to demonstrate the use of biochemical contents present within Cyperus rotundus, Eleusin indica, Euphorbia hirta, Melastoma malabathricum, Clidemia hirta and Pachyrhizus erosus extracts for the reduction of silver ion to silver nanoparticles (AgNPs) form. In addition, the antibacterial capability of the synthesized AgNPs and plant extracts alone against a rare bacterium, Chromobacterium haemolyticum (C. haemolyticum), was examined. Moreover, ultraviolet-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX) and inductively coupled plasma atomic emission spectroscopy (ICPOES) of the synthesized AgNPs were characterized. The smallest AgNPs can be produced when Cyperus rotundus extracts were utilized. In addition, this study has found that the synthesis efficiencies using all plant extracts are in the range of 72% to 91% with the highest percentage achieved when Eleusin indica extract was employed. All synthesized AgNPs have antibacterial capability against all examined bacteria depending on their size and bacteria types. Interestingly, Melastoma malabathricum and Clidemia hirta extracts have demonstrated an antibacterial ability against C. haemolyticum.

A purely green synthesis of silver nanoparticles using Carica papaya, Manihot esculenta, and Morinda citrifolia: synthesis and antibacterial evaluations.

Green procedure for synthesizing silver nanoparticles (AgNPs) is currently considered due to its economy and toxic-free effects. Several existing works on synthesizing AgNPs using leaves extract still involve the use of physical or mechanical treatment such as heating or stirring, which consume a lot of energy. To extend and explore the green extraction philosophy, we report here the synthesis and antibacterial evaluations of a purely green procedure to synthesize AgNPs using Carica papaya, Manihot esculenta, and Morinda citrifolia leaves extract without the aforementioned additional treatment. The produced AgNPs were characterized using the ultraviolet-visible spectroscopy, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and antibacterial investigations. For antibacterial tests, two bacteria namely Escherichia coli and Bacillus cereus were selected. The presently employed method has successfully produced spherical AgNPs having sizes ranging from 9 to 69 nm, with plasmonic characteristics ranging from 356 to 485 nm, and energy-dispersive X-ray peak at approximately 3 keV. In addition, the smallest particles can be produced when Manihot esculenta leaves extract was applied. Moreover, this study also confirmed that both the leaves and synthesized AgNPs exhibit the antibacterial capability, depending on their concentration and the bacteria type.