Changes in the Rheological and Adhesive Properties of Epoxy Resin Used in the Technology of Reinforcement of Structural Elements with CFRP Tapes.

Nowadays, FRP composites are widely applied in the construction industry. Their inherent characteristics are used to strengthen structural elements made of various materials and to increase their durability. The following paper contains the results obtained in a conducted research program aimed at determining the ability to improve the durability of epoxy resin modified with the sonication process, microsilica and carbon nanotubes. The adhesive modified was used to adhere a CFRP tape to a concrete surface. Changes in the viscosity, physicochemical parameters and adhesion of the resin were studied. Selected parameters of the concrete substrate prepared using the sandblasting method, determined with the contact profilometry, were also taken into account. During the tests, attention was paid to the thorough execution and preparation of the samples. As a result of the research, it was demonstrated that the adhesion of the modified epoxy adhesive to concrete could be increased by approximately 28% in the case of the addition of carbon nanotubes and by up to 66% in the case of the addition of microsilica. The modifications used, in addition to increasing the adhesion of the resin to the concrete substrate, were also aimed at reducing the weakening of the adhesive joints caused by oxidation of the resin over time. The results obtained will serve as a basis for evaluating the possibility of their use in the practical reinforcement of structural reinforced-concrete elements.

Adhesion of Modified Epoxy Resin to a Concrete Surface.

The protection of building elements exposed to the weather using hydrocarbon-based agents is a comprehensive group of analyses. These agents are characterized by very high chemical resistance, waterproofness, as well as adhesion to surfaces made of various materials, i.e., concrete, steel, ceramics and wood. Modification of adhesion, which ultimately leads to an increase in the durability of a protective/face coating made of such a material, can lead to a longer life of these layers and a less frequent need for replacement or restoration. The following paper describes an experimental research program on the possibility of increasing the adhesion and durability of epoxy resin modified with the use of powder fillers. The resin can be used as a protective or top coat on the surface of concretes or mortars. The main objective of the study was to increase the adhesion of the resin to the concrete substrate, modified by grinding and sandblasting to increase the roughness. For the series studied, both the changes in physicochemical parameters, which determine how the resin penetrates the irregularities of the substrate and mechanical parameters, which mainly determine the durability of the layer made in this way, were identified. A modified version of the pull-off test was used as a method to directly evaluate the effectiveness of the modified resins.

Influence of Epoxy Glue Modification on the Adhesion of CFRP Tapes to Concrete Surface.

Strengthening structural concrete, steel or wooden elements with reinforcement tapes is currently a popular method of extending the durability of buildings. In the glued joint Carbon Fibre Reinforced Polymer (CFRP) tape-concrete substrate, the most critical element is the adhesive layer connecting both materials. The glued joint participates in the transfer of stresses between the reinforced element and the reinforcement tape. Among the numerous analyses of this type of joint, the work resulting from the action of shear stresses (shearing) is considered most frequently, which also results from the originally developed computational models emerging with the development of research on the processes of adhesive effectiveness. The subsequent theories considered the share of other stresses, which is also related to the complex nature of the phenomenon of glue adhesion on various surfaces. Research shows the possibility of modifying the adhesion of the glue by altering its composition and the target surface of application. The study contains the results of research on the possibility of changing the adhesion of the glue to a concrete surface prepared by grinding and sandblasting. The selected epoxy resin has been modified by using the additives of microsilica and carbon nanotubes. Effective mixing of ingredients was achieved due to the use of sonication in the mixing process. Then, the adhesives prepared in this way were used to stick fragments of CFRP tape to concrete surfaces: cleaned, ground and sandblasted. A modified version of the pull-off test was used to determine the effectiveness of adhesion the CFRP tapes to concrete. The results are the final stage summarizing a series of studies including other parameters affecting the bonding efficiency and durability of adhesive bonds.

Physico-Mechanical and Rheological Properties of Epoxy Adhesives Modified by Microsilica and Sonication Process.

Industrial waste from the production of metallic silicon and silicon-iron alloys, which includes silica fumes (microsilica), is subject to numerous applications aiming at its reuse in concrete and polymeric composites. Recycling solves the problem of their storage and adverse environmental impact. Six different formulas of epoxy resins were tested, differing in the type of polymer, the mixing process (sonication or not) and the presence of microsilica. The study showed that microsilica added to the epoxy resin changes its viscosity and free surface energy, and these are the parameters that determine the adhesion of the polymer to the concrete surface. Strength tests and SEM analysis have determined how microsilica molecules can penetrate the structure of polymer macromolecules by filling and forming temporary chemical bonds. Mixing the fillers with the adhesive was achieved by using a sonication process. The analysis of the obtained results showed that, depending on the initial composition of the polymer, the addition of microsilica can change the chemical, physical and mechanical properties of the hardened adhesive to varying degrees. In the case of adhesives used in the construction industry to strengthen and glue structural elements, these changes significantly affect the durability of the adhesive joints.

Wettability of Asphalt Concrete with Natural and Recycled Aggregates from Sanitary Ceramics.

In line with the current trend of seeking alternative methods for modification of the existing building composites, such as mineral-asphalt mixtures (MAMs), the materials from concrete and ceramics recycling are being used in increasingly wider applications. When added to MAMs as an aggregate, ceramic building material, which has different properties than the raw material (clay), may significantly influence the aggregate properties, including the wettability, porosity, asphalt adhesion, and consequently the mixture durability. The material's microstructure was found using SEM. The wetting properties of mineral-asphalt mixtures were determined by measuring the contact angles (CA) of their surfaces, using water as the measuring liquid. The total surface free energy (SFE) values were determined using the Neumann method. When analyzing the research results, it can be noticed that the chemical composition of the ceramic aggregate has a significant influence on the adhesion of asphalt to its surface due to the chemical affinity. Waste ceramic aggregate, despite its acidic pH value being connected with its elevated silica content, exhibits good adhesive properties.

Processes of Fatigue Destruction in Nanopolymer-Hydrophobised Ceramic Bricks.

The article presents a proposal of a model of fatigue destruction of hydrophobised ceramic brick, i.e., a basic masonry material. The brick surface was hydrophobised with two inorganic polymers: a nanopolymer preparation based on dialkyl siloxanes (series 1-5) and an aqueous silicon solution (series 6-10). Nanosilica was added to the polymers to enhance the stability of the film formed on the brick surface. To achieve an appropriate blend of the polymer liquid phase and the nano silica solid phase, the mixture was disintegrated by sonication. The effect of the addition of nano silica and sonication on changes in the rheological parameters, i.e., viscosity and surface tension, was determined. Material fatigue was induced by cyclic immersion of the samples in water and drying at a temperature of 100 °C, which caused rapid and relatively dynamic movement of water. The moisture and temperature effect was determined by measurement of changes in surface hardness performed with the Vickers method and assessment of sample absorbability. The results provided an approximate picture of fatigue destruction of brick and hydrophobic coatings in relation to changes in their temporal stability. Additionally, SEM images of hydrophobic coatings in are shown.

Post-translational phosphorylation of serine 74 of human deoxycytidine kinase favors the enzyme adopting the open conformation making it competent for nucleoside binding and release.

Deoxycytidine kinase (dCK) uses either ATP or UTP as a phosphoryl donor to catalyze the phosphorylation of nucleoside acceptors. The kinetic properties of human dCK are modulated in vivo by phosphorylation of serine 74. This residue is a part of the insert region and is distant from the active site. Replacing the serine with a glutamic acid (S74E variant) can mimic phosphorylation of Ser74. To understand how phosphorylation affects the catalytic properties of dCK, we examined the S74E variant of dCK both structurally and kinetically. We observe that the presence of a glutamic acid at position 74 favors the adoption by the enzyme of the open conformation. Glu74 stabilizes the open conformation by directly interacting with the indole side chain of Trp58, a residue that is in the proximity of the base of the nucleoside substrate. The open dCK conformation is competent for the binding of nucleoside but not for phosphoryl transfer. In contrast, the closed conformation is competent for phosphoryl transfer but not for product release. Thus, dCK must make the transition between the open and closed states during the catalytic cycle. We propose a reaction scheme for dCK that incorporates the transition between the open and closed states, and this serves to rationalize the observed kinetic differences between wild-type dCK and the S74E variant.