Rapid Identification of Potential Drug Candidates from Multi-Million Compounds' Repositories. Combination of 2D Similarity Search with 3D Ligand/Structure Based Methods and In Vitro Screening.

Rapid in silico selection of target focused libraries from commercial repositories is an attractive and cost-effective approach in early drug discovery. If structures of active compounds are available, rapid 2D similarity search can be performed on multimillion compounds' databases. This approach can be combined with physico-chemical parameter and diversity filtering, bioisosteric replacements, and fragment-based approaches for performing a first round biological screening. Our objectives were to investigate the combination of 2D similarity search with various 3D ligand and structure-based methods for hit expansion and validation, in order to increase the hit rate and novelty. In the present account, six case studies are described and the efficiency of mixing is evaluated. While sequentially combined 2D/3D similarity approach increases the hit rate significantly, sequential combination of 2D similarity with pharmacophore model or 3D docking enriched the resulting focused library with novel chemotypes. Parallel integrated approaches allowed the comparison of the various 2D and 3D methods and revealed that 2D similarity-based and 3D ligand and structure-based techniques are often complementary, and their combinations represent a powerful synergy. Finally, the lessons we learnt including the advantages and pitfalls of the described approaches are discussed.

Design and Selection of Novel C1s Inhibitors by In Silico and In Vitro Approaches.

The complement system is associated with various diseases such as inflammation or auto-immune diseases. Complement-targeted drugs could provide novel therapeutic intervention against the above diseases. C1s, a serine protease, plays an important role in the CS and could be an attractive target since it blocks the system at an early stage of the complement cascade. Designing C1 inhibitors is particularly challenging since known inhibitors are restricted to a narrow bioactive chemical space in addition selectivity over other serine proteases is an important requirement. The typical architecture of a small molecule inhibitor of C1s contains an amidine (or guanidine) residue, however, the discovery of non-amidine inhibitors might have high value, particularly if novel chemotypes and/or compounds displaying improved selectivity are identified. We applied various virtual screening approaches to identify C1s focused libraries that lack the amidine/guanidine functionalities, then the in silico generated libraries were evaluated by in vitro biological assays. While 3D structure-based methods were not suitable for virtual screening of C1s inhibitors, and a 2D similarity search did not lead to novel chemotypes, pharmacophore model generation allowed us to identify two novel chemotypes with submicromolar activities. In three screening rounds we tested altogether 89 compounds and identified 20 hit compounds (<10 µM activities; overall hit rate: 22.5%). The highest activity determined was 12 nM (1,2,4-triazole), while for the newly identified chemotypes (1,3-benzoxazin-4-one and thieno[2,3-d][1,3]oxazin-4-one) it was 241 nM and 549 nM, respectively.

Quantitative characterization of the activation steps of mannan-binding lectin (MBL)-associated serine proteases (MASPs) points to the central role of MASP-1 in the initiation of the complement lectin pathway.

Mannan-binding lectin (MBL)-associated serine proteases, MASP-1 and MASP-2, have been thought to autoactivate when MBL/ficolin·MASP complexes bind to pathogens triggering the complement lectin pathway. Autoactivation of MASPs occurs in two steps: 1) zymogen autoactivation, when one proenzyme cleaves another proenzyme molecule of the same protease, and 2) autocatalytic activation, when the activated protease cleaves its own zymogen. Using recombinant catalytic fragments, we demonstrated that a stable proenzyme MASP-1 variant (R448Q) cleaved the inactive, catalytic site Ser-to-Ala variant (S646A). The autoactivation steps of MASP-1 were separately quantified using these mutants and the wild type enzyme. Analogous mutants were made for MASP-2, and rate constants of the autoactivation steps as well as the possible cross-activation steps between MASP-1 and MASP-2 were determined. Based on the rate constants, a kinetic model of lectin pathway activation was outlined. The zymogen autoactivation rate of MASP-1 is ∼3000-fold higher, and the autocatalytic activation of MASP-1 is about 140-fold faster than those of MASP-2. Moreover, both activated and proenzyme MASP-1 can effectively cleave proenzyme MASP-2. MASP-3, which does not autoactivate, is also cleaved by MASP-1 quite efficiently. The structure of the catalytic region of proenzyme MASP-1 R448Q was solved at 2.5 Å. Proenzyme MASP-1 R448Q readily cleaves synthetic substrates, and it is inhibited by a specific canonical inhibitor developed against active MASP-1, indicating that zymogen MASP-1 fluctuates between an inactive and an active-like conformation. The determined structure provides a feasible explanation for this phenomenon. In summary, autoactivation of MASP-1 is crucial for the activation of MBL/ficolin·MASP complexes, and in the proenzymic phase zymogen MASP-1 controls the process.

Revised mechanism of complement lectin-pathway activation revealing the role of serine protease MASP-1 as the exclusive activator of MASP-2.

The lectin pathway of complement activation is an important component of the innate immune defense. The initiation complexes of the lectin pathway consist of a recognition molecule and associated serine proteases. Until now the autoactivating mannose-binding lectin-associated serine protease (MASP)-2 has been considered the autonomous initiator of the proteolytic cascade. The role of the much more abundant MASP-1 protease was controversial. Using unique, monospecific inhibitors against MASP-1 and MASP-2, we corrected the mechanism of lectin-pathway activation. In normal human serum, MASP-2 activation strictly depends on MASP-1. MASP-1 activates MASP-2 and, moreover, inhibition of MASP-1 prevents autoactivation of MASP-2. Furthermore we demonstrated that MASP-1 produces 60% of C2a responsible for C3 convertase formation.

Interaction between separated consecutive complement control modules of human C1r: implications for dimerization of the full-length protease.

Complement control protein modules (CCP) typically mediate protein:protein interaction during immune response in vertebrates. Using NMR chemical shift perturbation mapping, we present previously lacking experimental evidence for intermolecular interactions between the CCP1 and CCP2 modules of the human C1r serine protease (SP). The identified interface is clearly distinct from that observed in the covalently linked CCP1-CCP2 pair. Structural models of the CCP1-CCP2-SP segments of two C1r molecules built on the basis of shift perturbation data are fully consistent with an extended interaction interface and suggests the possibility of a structural rearrangement as a switch between functional states of human C1r.

Intermodule cooperativity in the structure and dynamics of consecutive complement control modules in human C1r: structural biology.

The modular C1r protein is the first protease activated in the classical complement pathway, a key component of innate immunity. Activation of the heteropentameric C1 complex, possibly accompanied by major intersubunit re-arrangements besides proteolytic cleavage, requires targeted regulation of flexibility within the context of the intramolecular and intermolecular interaction networks of the complex. In this study, we prepared the two complement control protein (CCP) modules, CCP1 and CCP2, of C1r in their free form, as well as their tandem-linked construct, CCP1CCP2, to characterize their solution structure, conformational dynamics and cooperativity. The structures derived from NMR signal dispersion and secondary chemical shifts were in good agreement with those obtained by X-ray crystallography. However, successful heterologus expression of both the single CCP1 module and the CCP1CCP2 constructs required the attachment of the preceding N-terminal module, CUB2, which could then be removed to obtain the properly folded proteins. Internal mobility of the modules, especially that of CCP1, exhibited considerable changes accompanied by interfacial chemical shift alterations upon the attachment of the C-terminal CCP2 domain. Our NMR data suggest that in terms of folding, stability and dynamics, CCP1 is heavily dependent on the presence of its neighboring modules in intact C1r. Therefore, CCP1 could be a focal interaction point, capable of transmitting information towards its neighboring modules.

Revisiting the mechanism of the autoactivation of the complement protease C1r in the C1 complex: structure of the active catalytic region of C1r.

C1r is a modular serine protease which is the autoactivating component of the C1 complex of the classical pathway of the complement system. We have determined the first crystal structure of the entire active catalytic region of human C1r. This fragment contains the C-terminal serine protease (SP) domain and the preceding two complement control protein (CCP) modules. The activated CCP1-CCP2-SP fragment makes up a dimer in a head-to-tail fashion similarly to the previously characterized zymogen. The present structure shows an increased number of stabilizing interactions. Moreover, in the crystal lattice there is an enzyme-product relationship between the C1r molecules of neighboring dimers. This enzyme-product complex exhibits the crucial S1-P1 salt bridge between Asp631 and Arg446 residues, and intermolecular interaction between the CCP2 module and the SP domain. Based on these novel structural information we propose a new split-and-reassembly model for the autoactivation of the C1r. This model is consistent with experimental results that have not been explained adequately by previous models. It allows autoactivation of C1r without large-scale, directed movement of C1q arms. The model is concordant with the stability of the C1 complex during activation of the next complement components.

The structure of MBL-associated serine protease-2 reveals that identical substrate specificities of C1s and MASP-2 are realized through different sets of enzyme-substrate interactions.

A family of serine proteases mediates the proteolytic cascades of several defense mechanisms in vertebrates, such as the complement system, blood coagulation and fibrinolysis. These proteases usually form large complexes with other glycoproteins. Their common features are their modular structures and restricted substrate specificities. The lectin pathway of complement, where mannose-binding lectin (MBL) recognizes the carbohydrate structures on pathogens, is activated by mannose-binding lectin-associated serine protease-2 (MASP-2). We present the 2.25A resolution structure of the catalytic fragment of MASP-2 encompassing the second complement control protein module (CCP2) and the serine protease (SP) domain. The CCP2 module stabilizes the structure of the SP domain as demonstrated by differential scanning calorimetry measurements. The asymmetric unit contains two molecules with different CCP-SP domain orientations, reflecting increased modular flexibility at the CCP2/SP joint. This flexibility may partly explain the ability of the MASP-2 dimer to perform all of its functions alone, whereas the same functions are mediated by the much larger C1r2-C1s2 tetramer in the C1 complex of the classical pathway. The main scaffold of the MASP-2 SP domain is chymotrypsin-like. Eight surface loops determine the S1 and other subsite specificities. Surprisingly, some surface loops of MASP-2, e.g. loop 1 and loop 2, which form the S1 pocket are similar to those of trypsin, and show significant differences if compared with those of C1s, indicating that the nearly identical substrate specificities of C1s and MASP-2 are realized through different sets of enzyme-substrate interactions.

Studies on the mechanisms of allergen-induced activation of the classical and lectin pathways of complement.

Allergen extracts are efficient activators of the complement system trough the classical pathway. Involvement of the lectin pathway was not previously studied. To further examine the mechanism of complement activation by allergens, in vitro experiments, which covered early steps both of classical and lectin pathways, were performed. Two types of allergens used in these studies: parietaria (PA) and house dust (HD) mite extracts. These allergen extracts bound to the globular head of C1q and interacted with purified mannan-binding lectin (MBL) as measured by solid-phase ELISA. None of the allergen extracts was able to activate human C1 in vitro, as measured by the determination of the split products of C1s in a reconstituted precursor C1 preparation. Neither the HD nor the PA extracts induced C4d generation above background in the serum of three subjects with hypogammaglobulinaemia but normal complement haemolytic activity. After reconstitution to normal level with purified human IgG, allergen extracts induced C4d formation above control at a level comparable to that measured in normal serum incubated with the same amounts of the extracts. HD-induced C4d generation was about the same comparable in MBL-depleted serum and in normal sera. In contrast PA induced no C4d formation in the MBL-depleted serum, whereas reconstitution with purified MBL restored C4d generation. These in vitro findings indicate that although the allergen extracts can bind purified C1q and MBL, they require IgG for efficient complement activation. Depending on the allergens, this activation may be initiated through C1, MBL, or both.

Natural substrates and inhibitors of mannan-binding lectin-associated serine protease-1 and -2: a study on recombinant catalytic fragments.

Mannan-binding lectin-associated serine protease (SP) (MASP)-1 and MASP-2 are modular SP and form complexes with mannan-binding lectin, the recognition molecule of the lectin pathway of the complement system. To characterize the enzymatic properties of these proteases we expressed their catalytic region, the C-terminal three domains, in Escherichia coli. Both enzymes autoactivated and cleaved synthetic oligopeptide substrates. In a competing oligopeptide substrate library assay, MASP-1 showed extreme Arg selectivity, whereas MASP-2 exhibited a less restricted, trypsin-like specificity. The enzymatic assays with complement components showed that cleavage of intact C3 by MASP-1 and MASP-2 was detectable, but was only approximately 0.1% of the previously reported efficiency of C3bBb, the alternative pathway C3-convertase. Both enzymes cleaved C3i 10- to 20-fold faster, but still at only approximately 1% of the efficiency of MASP-2 cleavage of C2. We believe that C3 is not the natural substrate of either enzyme. MASP-2 cleaved C2 and C4 at high rates. To determine the role of the individual domains in the catalytic region of MASP-2, the second complement control protein module together with the SP module and the SP module were also expressed and characterized. We demonstrated that the SP domain alone can autoactivate and cleave C2 as efficiently as the entire catalytic region, while the second complement control protein module is necessary for efficient C4 cleavage. This behavior strongly resembles C1s. Each MASP-1 and MASP-2 fragment reacted with C1-inhibitor, which completely blocked the enzymatic action of the enzymes. Nevertheless, relative rates of reaction with alpha-2-macroglobulin and C1-inhibitor suggest that alpha-2-macroglobulin may be a significant physiological inhibitor of MASP-1.