METHODS FOR DIAGNOSING DENTAL CARIES LESIONS.

Tooth decay (dental caries) commonly occurs throughout the world and is one of the most widespread infectious diseases of lifestyle, globally affecting all age groups; up to 90% schoolchildren and almost 100% adults in both developing and developed countries. When left untreated, it can lead to disease outbreaks resulting in advere-health and life-threatening conditions such as endocarditis or sepsis. Undoubtedly, basic measures are thus required in both dental and GP practice to ensure that dental caries are detected early. This article presents the various diagnostic methods used to identify these disease outbreaks.

The Barrier's Heights and Its Inhomogeneities on Diamond Silicon Interfaces.

In this work, the electrical parameters of the polycrystalline diamonds' p-PCD/n-Si heterojunction were investigated using temperature-dependent current-voltage (I-V) characteristics. In the temperature range of 80-280 K, the ideality factor (n) and energy barrier height (φb) were found to be strongly temperature dependent. The φb increases with temperature rise, while the n value decreases. The observed dependencies are due to imperfections at the interface region of a heterojunction and the non-homogeneous distribution of the potential barrier heights. Values of the φb were calculated from I-V characteristics using the thermionic emission theory (TE). The plot of φb versus 1/2 kT revealed two distinct linear regions with different slopes in temperature regions of 80-170 K and 170-280 K. This indicates the existence of a double Gaussian distribution (DGD) in heterojunctions. Parameters such as mean barrier heights φ¯b and standard deviations σ were obtained from the plots linearization and read out from intercepts and slopes. They take values φ¯b = 1.06 eV, σ = 0.43 eV, respectively. The modified Richardson plot is drawn to show the linear behavior in these two temperature ranges, disclosing different values of the effective Richardson constants (A*).

The Influence of Aminoalcohols on ZnO Films' Structure.

Preparing structures with the sol-gel method often requires control of the basal plane of crystallites, crystallite structures, or the appearance of the voids. One of the critical factors in the formation of a layer are additives, such as aminoalcohols, which increase the control of the sol formation reaction. Since aminoalcohols differ in boiling points and alkalinity, their selection may play a significant role in the dynamics of structure formation. The main aim of this work is to examine the properties of ZnO layers grown using different aminoalcohols at different concentration rates. The layers were grown on various substrates, which would provide additional information on the behavior of the layers on a specific substrate, and the mixture was annealed at a relatively low temperature (400 °C). The research was conducted using monoethanolamine (MEA) and diethanolamine (DEA). The aminoalcohols were added to the solutions in equal concentrations. The microscopic image of the structure and the size of the crystallites were determined using micrographs. X-ray diffractometry and Raman spectroscopy were used for structural studies, phase analysis and to establish the purity of the obtained films. UV-vis absorption and photoluminescence were used to evaluate structural defects. This paper shows the influence of the stabilizer on the morphology of samples and the influence of the morphology and structure on the optical properties. The above comparison may allow the preparation of ZnO samples for specific applications.

Glucose determination using amperometric non-enzymatic sensor based on electroactive poly(caffeic acid)@MWCNT decorated with CuO nanoparticles.

A novel non-enzymatic glucose sensor based on poly(caffeic acid)@multi-walled carbon nanotubes decorated with CuO nanoparticles (PCA@MWCNT-CuO) was developed. The described approach involves the complexation/accumulation of Cu(II) on PCA@MWCNT followed by electrochemical CuO deposition in an alkaline electrolyte. The morphology and surface characteristics of the nanomaterial were determined by transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), atomic force microscopy (AFM), Raman spectroscopy, and inductively coupled plasma mass spectrometry (ICP-MS). A hybrid-support sensor device was then developed to assess the glucose concentration in different solutions. The sensitivity of the electrode is 2412 µA mM-1 cm-2. The electrode exhibited a broad linear range of 2 µM to 9 mM and a low limit of detection (LOD) of 0.43 µM (relative standard deviation, RSD = 2.3%) at + 0.45 V vs Ag/AgCl. The excellent properties obtained for glucose detection were most likely due to the synergistic effect of the combination of individual components: poly(caffeic acid), MWCNTs, and CuO. Good accuracy and high precision were demonstrated for quantifying glucose concentrations in human serum and blood samples (the recovery ranged from 95.0 to 99.5%). The GC/PCA@MWCNT-CuO sensor represents a novel, simple, and low-cost approach to the fabrication of devices for amperometric sensing of glucose.

The Hydrogenation Impact on Electronic Properties of p-Diamond/n-Si Heterojunctions.

The undoped polycrystalline diamond films (PDFs) have been deposited on n-type silicon (Si) by Hot Filament Chemical Vapor Deposition (HF CVD) technique. The reaction gases are a mixture of methane and hydrogen. The obtained PDFs were characterized by scanning electron microscopy (SEM) and Raman spectroscopy which, in addition to the diamond phase, also confirms the presence of sp2 hybridized carbon bonds. As-grown CVD diamond layers are hydrogen terminated and show p-type conductivity. The effect of the level of hydrogenation on the electrical properties of p-diamond/n-Si heterojunctions has been investigated by temperature dependent current-voltage (J-V/T) characteristics. The obtained results suggest that the energy distribution of interface states at the grain boundary (GB) subjected to hydrogenation becomes shallower, and the hole capture cross-section can be reduced. Hydrogenation can lead to a significant reduction of the GB potential barrier. These results can be interesting from the point of view of hydrogen passivation of GBs in microelectronics.

The Undoped Polycrystalline Diamond Film-Electrical Transport Properties.

The polycrystalline diamonds were synthesized on n-type single crystalline Si wafer by Hot Filament CVD method. The structural properties of the obtained diamond films were checked by X-ray diffraction and Raman spectroscopy. The conductivity of n-Si/p-diamond, sandwiched between two electrodes, was measured in the temperature range of 90-300 K in a closed cycle cryostat under vacuum. In the temperature range of (200-300 K), the experimental data of the conductivity were used to obtain the activation energies Ea which comes out to be in the range of 60-228 meV. In the low temperature region i.e., below 200 K, the conductivity increases very slowly with temperature, which indicates that the conduction occurs via Mott variable range hopping in the localized states near Fermi level. The densities of localized states in diamond films were calculated using Mott's model and were found to be in the range of 9×1013 to 5×1014eV-1cm-3 depending on the diamond's surface hydrogenation level. The Mott's model allowed estimating primal parameters like average hopping range and hopping energy. It has been shown that the surface hydrogenation may play a crucial role in tuning transport properties.

The Effect of Surface Treatment on Structural Properties of CVD Diamond Layers with Different Grain Sizes Studied by Raman Spectroscopy.

Extensive Raman spectroscopy studies combined with scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) measurements were performed to investigate structural and chemical changes in diamond layers deposited by chemical vapour deposition (CVD) upon post-growth treatment with hydrogen. The aim of this study is to characterize the changes in micro-structural properties of diamond layers with different grain sizes and different contents of sp2 carbon phase. Hydrogenation or oxidization of diamond layer surface is often performed to modify its properties; however, it can also strongly affect the surface structure. In this study, the impact of hydrogenation on the structure of diamond layer surface and its chemical composition is investigated. Owing to their polycrystalline nature, the structural properties of CVD diamond layers can strongly differ within the same layer. Therefore, in this project, in order to compare the results before and after hydrogen treatment, the diamond layers are subjected to Raman spectroscopy studies in the vicinity of a T-shape marker fabricated on the surface of each diamond layer studied.

Trabecular bone remodelling in the femur of C57BL/6J mice treated with diclofenac in combination with treadmill exercise.

PURPOSE: Analgesic treatment with diclofenac deteriorates bone structure and decreases biomechanical properties. This bone loss has been though to be reversed by training. The impact of exercise on bone treated with diclofenac (DF) has reminded elusive. In the present study, we assayed the combined impact of exercises and DF on mouse femur. METHODS: The femur samples we obtained from 30 days treated C57BL/6J female mice. The training group ran on a horizontal treadmill at 12 m/min by 30 min a day (5% grade/slope). The group of ten mice treated with DF received the drug subcutaneously every day (5 mg/kg of body weight/day). The combined group ran on the treadmill and obtained DF. After 30 days, we sacrificed mice and studied their femurs using microcomputed tomography (µCT), dynamic mechanical analysis (DMA) and nanoindentation. RESULTS: We observed that treadmill running and DF decreased trabecular bone volume and mineral density. Combined effect of training and DF was not additive. A significant interaction of both parameters suggested protective effect of training on bone loss provoked by DF. The femur cortical bone shell remained untouched by the training and treatment. The training and the DF treatment did not alter the storage modulus E' significantly. The unchanged storage modulus would be suggesting on the unaltered bone strength. CONCLUSIONS: We concluded that even relatively short time of training with concomitant DF treatment could be protective on trabecular bone. Although viscoelastic properties of the entire femur were not modulated, femur trabecular tissue was thinned by treatment with DF and protected by training.

Orientation Dependence of Cathodoluminescence and Photoluminescence Spectroscopy of Defects in Chemical-Vapor-Deposited Diamond Microcrystal.

Point defects, impurities, and defect-impurity complexes in diamond microcrystals were studied with the cathodoluminescence (CL) spectroscopy in the scanning electron microscope, photoluminescence (PL), and Raman spectroscopy (RS). Such defects can influence the directions that microcrystals are grown. Micro-diamonds were obtained by a hot-filament chemical vapor deposition (HF CVD) technique from the methane-hydrogen gas mixture. The CL spectra of diamond microcrystals taken from (100) and (111) crystallographic planes were compared to the CL spectrum of a (100) oriented Element Six diamond monocrystal. The following color centers were identified: 2.52, 2.156, 2.055 eV attributed to a nitrogen-vacancy complex and a violet-emitting center (A-band) observed at 2.82 eV associated with dislocation line defects, whose atomic structure is still under discussion. The Raman studies showed that the planes (111) are more defective in comparison to (100) planes. What is reflected in the CL spectra as (111) shows a strong band in the UV region (2.815 eV) which is not observed in the case of the (100) plane.

The n-Si/p-CVD Diamond Heterojunction.

Due to the possible applications, materials with a wide energy gap are becoming objects of interest for researchers and engineers. In this context, the polycrystalline diamond layers grown by CVD methods on silicon substrates seem to be a promising material for engineering sensing devices. The proper tuning of the deposition parameters allows us to develop the diamond layers with varying crystallinity and defect structure, as was shown by SEM and Raman spectroscopy investigations. The cathodoluminescence (CL) spectroscopy revealed defects located just in the middle of the energy gap of diamonds. The current-voltage-temperature, I-V-T characteristics performed in a broad temperature range of 77-500 K yielded useful information about the electrical conduction in this interesting material. The recorded I-V-T in the forward configuration of the n-Si/p-CVD diamond heterojunction indicated hopping trough defects as the primary mechanism limiting conduction properties. The Ohmic character of the carriers flux permitting throughout heterojunction is intensified by charges released from the depletion layer. The magnification amplitude depends on both the defect density and the probability that biasing voltage is higher than the potential barrier binding the charge. In the present work, a simple model is proposed that describes I-V-T characteristics in a wide range of voltage, even where the current saturation effect occurs.

Highly Conductive Doped Hybrid Carbon Nanotube-Graphene Wires.

The following paper explores the nature of electronic transport in a hybrid carbon nanotube-graphene conductive network. These networks may have a tremendous impact on the future formation of new electrical conductors, batteries, and supercapacitors, as well as many other electronic and electrical applications. The experiments described show that the deposition of graphene nanoflakes within a carbon nanotube network improves both its electrical conductivity and its current-carrying capacity. They also show that the effectiveness of doping is enhanced. To explain the effects observed in the hybrid carbon nanotube-graphene conductive network, a theoretical model was developed. The theory explains that graphenes are not merely effective conductive fillers of the carbon nanotube networks but also effective bridges that are able to introduce additional states at the Fermi level of carbon nanotubes.

Alpha-keratin and corneous beta protein in the parakeratinized epithelium of the tongue in the domestic goose (Anser anser f. domestica).

The parakeratinized epithelium is a common epithelium in the oral cavity in birds and is characterized by the presence of cell nuclei in the cells of the cornified layer. This epithelium covers almost the entire dorsal surface of the tongue in the domestic goose apart of the lingual nail and conical papillae. So far no study has identified the molecular proteins alpha-keratin (IF-keratin) and/or corneous beta protein (CBP), which are responsible for keratinization or cornification processes in the parakeratinized epithelium of domestic geese. The study was performed using immunohistochemical (IHC) methods to identify alpha-keratin. The innovative method of Raman microspectroscopy was used to determine the presence of CBP and specify their percentage in epithelial layers of the parakeratinized epithelium. The results revealed that alpha-keratin is present in the whole parakeratinized epithelium. A strong staining reaction was detected in the basal and intermediate layers and a less strong staining reaction in the cornified layer. Raman microspectroscopy analysis confirmed the presence of alpha-keratin and demonstrated that its percentage decreases from the basal layer to the cornified layer. The Raman microspectroscopy technique revealed the occurrence of CBP in the parakeratinized epithelium and demonstrated that the percentage of this protein increases from the basal layer to the cornified layer. Performed analysis determines that parakeratinized epithelium undergoes cornification. However, the lower percentage of CBP in the cornified layer of parakeratinized epithelium than in orthokeratinized epithelium points to the fact that parakeratinized epithelium has a weaker protective function.

Gellan gum macrobeads loaded with naproxen: The impact of various naturally derived polymers on pH-dependent behavior.

Aims After oral administration, naproxen generates several side-effects related to stomach malfunction. Undoubtedly, the enteric dosage forms with naproxen can be considered as safer. Moreover, since it has been evidenced that development and growth of colorectal cancer is related to the presence of cyclooxygenase, naproxen is investigated in terms of the tumor prevention. The aim of the present work was to formulate and evaluate the properties of novel naproxen-loaded macrobeads, made on the basis of low-acyl gellan gum and its blends with carrageenans, guar gum, cellulose sulfate, and dextran sulfates. Method Seven formulations were prepared by ionotropic gelation. The morphology of the dried beads was evaluated by scanning electron microscopy. The next step focused on Raman spectroscopy and thermal analysis of naproxen, polymers, and the beads. Next, the swelling behavior was examined in three acceptor fluids at pH = 1.2; 4.5, and 7.4. The beads were evaluated regarding naproxen content and encapsulation efficiency. The last stage of the work concerned the drug release studies. Results Addition of any other polysaccharide than gellan resulted in flattening of the beads upon drying. Differential scanning calorimetry confirmed the crystalline form of naproxen. Raman spectra showed that no apparent interactions occurred. In the acidic environment, all the beads revealed the tendency to absorb water. The beads swelled to the greatest extent at pH = 4.5. Naproxen was released from the beads at a varied rate. At pH = 7.4, the most prolonged release was observed for the beads containing carrageenans. Conclusions We have proved that blending of gellan with various polysaccharides can change the pH-dependent properties of the beads loaded with naproxen. We believe that the information enclosed in the paper will be of particular importance regarding the development and characteristics of novel oral dosage forms based on natural polymers.

pH-Dependent Behavior of Novel Gellan Beads Loaded with Naproxen.

BACKGROUND: Oral administration of non-selective COX inhibitors involves the risk of serious side-effects. In the case of naproxen (NPX), the most frequent are those related to malfunctioning of the gastric mucosa. On the other hand, NPX and other NSAIDs are extensively studied in terms of colorectal cancer (CRC) prevention and inhibition, since it has been evidenced that COX-2 corresponds with the risk of the tumor occurrence and growth. Both side-effects in the stomach and possible antitumor activity of NPX justify the attempts to search for novel carriers for NPX with the site specific release in the colon. Thus, the aim of the work was to design, formulate and characterize low-acyl gellan gum (GG) macro beads as potential carriers for the delivery of NPX to the distal parts of the gastrointestinal tract. METHODS: The beads were obtained by the ionotropic gelation technique. CaCl2 solution was used as a cross-linking medium. After production, the beads were dried and used for further experiments. First, pure NPX and the beads were evaluated by Raman spectroscopy and DSC studies. The surface and morphology of the beads were analyzed by SEM. Next, the drug encapsulation efficiency and content in the beads were determined. The swelling and degradation behavior of the beads were evaluated in four simulated gastrointestinal fluids at different pH (1.2; 4.5; 6.8 and 7.4). The NPX in vitro release studies were conducted on USP I apparatus (rotating basket) at pH=7.4 and compared to the commercial enteric tablet. RESULTS: The polymer content of 0.5 % was considered as too low to obtain spherical beads in the dried form. Raman spectra confirmed that NPX did not undergo structural changes during production process. DSC studies showed that thermal decomposition at lower temperatures was observed for formulations with the lowest amount of GG. It turned out that the most important factor which determined the morphology of the beads was the amount of gellan gum in the initial mixture. The beads revealed 13.9- 39.9% of drug loading and 75.3-99.7% drug encapsulation efficiency. Swelling of the beads was pHdependent as the beads remained stable in the acidic environment but started to absorb water. In pH=7.4 after 3 hours, the beginning of the physical decomposition of the polymer matrix was observed. The drug release studies showed that in pH=7.4 the commercial tablets released 90% of the drug after 45 minutes while the amount of NPX released from pellets after the same time was 40-80%. CONCLUSION: In general, it can be stated that gellan macro beads may be regarded as suitable for site specific delivery of NPX to the colon. However, these simple to obtain beads can be potentially used as carriers for many different drugs whenever it is necessary to omit the stomach.

Localization of Alpha-Keratin and Beta-Keratin (Corneous Beta Protein) in the Epithelium on the Ventral Surface of the Lingual Apex and Its Lingual Nail in the Domestic Goose (Anser Anser f. domestica) by Using Immunohistochemistry and Raman Microspectroscopy Analysis.

The epithelium of the ventral surface of the apex of the tongue in most birds is specified by the presence of the special superficial layer called lingual nail. The aim of the present study is to determine the localization of the alpha-keratin and beta-keratin (corneous beta protein) in this special epithelium in the domestic goose by using immunohistochemistry staining and the Raman spectroscopy analysis. Due to lack of commercially available antibodies to detect beta-keratin (corneous beta protein), the Raman spectroscopy was used as a specific tool to detect and describe the secondary structure of proteins. The immunohistochemical (IHC) detections reveal the presence of alpha-keratin in all layers of the epithelium, but significant differences in the distribution of the alpha-keratin in the epithelial layers appear. The staining reaction is stronger from the basal layer to the upper zone of the intermediate layer. The unique result is weak staining for the alpha-keratin in the lingual nail. Applications of the Raman spectroscopy as a complementary method not only confirmed results of IHC staining for alpha-keratin, but showed that this technique could be used to demonstrate the presence of beta-keratin (corneous beta protein). Functionally, the localization of alpha-keratin in the epithelium of the ventral surface of the lingual apex provides a proper scaffold for epithelial cells and promotes structural integrity, whereas the presence of beta-keratin (corneous beta protein) in the lingual nail, described also as exoskeleton of the ventral surface of the apex, endures mechanical stress. Anat Rec, 300:1361-1368, 2017. © 2017 Wiley Periodicals, Inc.

Design and characteristics of gellan gum beads for modified release of meloxicam.

The aim of the presented work was to design, formulate and evaluate the properties of low-acyl gellan macro beads with the potential application as carriers for oral delivery of meloxicam (MLX) in the prophylaxis of colorectal cancer. The beads were obtained by means of ionotropic gelation technique. Calcium chloride (1.0%, 9.0 × 10-2 M) was used as the cross-linking agent. Nine different polymer, drug and surfactant (Tween®80) mixtures were used for production of the beads. The quantitative compositions of the mixtures were generated with the application of the Design of Experiments (DoE) modulus from the STATISTICA Software. The prepared formulations revealed 7.2-27.0% of drug loading and 29.2-50.7% drug encapsulation efficiency. It turned out that 0.5% amount of gellan gum in the mixtures was not sufficient to obtain spherical beads. The morphology and surface of the dried beads were analyzed by SEM. Raman spectra confirmed that MLX did not undergo structural changes during production of the beads. The swelling behavior and degradation of the beads were evaluated in three simulated gastrointestinal fluids at different pH (1.2; 4.5; 6.8). The MLX in vitro release studies were conducted on USP apparatus IV, working in the open loop mode. The obtained results showed that MLX release from the dried beads was pH-dependent. The formulations obtained from mixtures containing 1.0 and 1.5% of gellan may be considered as oral dosage forms for MLX, intended to omit the stomach and release the drug in the distal parts of the gastrointestinal tract.

Novel organogels for topical delivery of naproxen: design, physicochemical characteristics and in vitro drug permeation.

Taking into account possible irritation of the skin upon contact with naproxen (NPX) crystals and lower bioavailability after administration of the suspended or ionized drug, the aim of the work was to design and characterize novel and easy-to-formulate gels with the entirely dissolved drug in the acidic form. The formulations contained ethanol, SynperonicTMPE/L 62 and Arlasolve® DMI or Transcutol®. Carbopol®940 was used as the thickener. The properties of organogels were compared with six market products. The rheological measurements included steady flow experiments and oscillatory analysis. The texture profile analysis was conducted to calculate the mechanistic parameters. The in vitro permeation studies were performed on SOTAX CE 7 smart apparatus with the application of Strat-M artificial membranes. The obtained organogels fulfilled the requirements for topical products in terms of consistency, uniformity, stability, drug dissolution and permeation. The permeation studies revealed distinct differences among the commercial hydrogels according to permeation coefficients (kP), drug flux (Jss) and average cumulative amount of NPX per area after 12 h (Q12h). The presented work clearly shows that the organogels can be proposed as an alternative for commercial products where NPX occurs in the form of crystals.

The method of purifying bioengineered spider silk determines the silk sphere properties.

Bioengineered spider silks are a biomaterial with great potential for applications in biomedicine. They are biocompatible,biodegradable and can self-assemble into films, hydrogels, scaffolds, fibers, capsules and spheres. A novel, tag-free, bioengineered spider silk named MS2(9x) was constructed. It is a 9-mer of the consensus motif derived from MaSp2-the spidroin of Nephila clavipes dragline silk. Thermal and acidic extraction methods were used to purify MS2(9x). Both purification protocols gave a similar quantity and quality of soluble silk; however, they differed in the secondary structure and zeta potential value. Spheres made of these purified variants differed with regard to critical features such as particle size, morphology, zeta potential and drug loading. Independent of the purification method, neither variant of the MS2(9x) spheres was cytotoxic, which confirmed that both methods can be used for biomedical applications. However, this study highlights the impact that the applied purification method has on the further biomaterial properties.

Morphology and molecular arrangement of perylene-3,4,9,10-(n-pentylester) in thin layers obtained by zone-casting.

Liquid-crystalline perylene-3,4,9,10-tetra-(n-pentylester) zone-casted on hydrophilic glass substrates forms characteristic belt-like structures which are observed under optical microscope and atomic force microscope. Polarised Raman scattering spectra reveal the presence of anisotropic alignment of the molecules inside the obtained structures. Moreover, the absorption and fluorescence spectra confirm molecular aggregation in the belt-like structures. The research shows, that the belt-like structures are created by columns of molecules with the edge-on alignment on the glass substrate. Such organisation of the molecules is confirmed by spectroscopic methods. These structures can be interesting from the point of view of organic electronics.

STUDIES OF THE CRYSTALLINE FORM OF CEFUROXIME AXETIL: IMPLICATIONS FOR ITS COMPATIBILITY WITH EXCIPIENTS.

Amorphous and crystalline forms of cefuroxime axetil were identified and characterized using DSC, XRPD, SEM, FT-IR and Raman spectroscopy. Based on the results of chromatographic studies, changes in the kinetic mechanism and rate of degradation of the crystalline form of cefuroxime axetil in binary systems with excipients were also evaluated. The findings suggest that the mechanism of degradation of cefuroxime axetil in such systems depends on two factors: the applied excipient and storage conditions. Cefuroxime axetil in combination with magnesium stearate, croscarmellose sodium and crospovidone, microcrystalline cellulose, aerosil is decomposed according to the first-order reaction model in dry air as well as at an increased relative air humidity, which may be associated with non-catalytic interactions between the active pharmaceutical ingredient and the excipients. However, in the presence of mannitol, under elevated humidity conditions (RH - 76%), the degradation of cefuroxime axetil follows the autocatalytic model. According to ESP maps, computed binding energies and HOMO - LUMO gaps, differences of degradation curves between cefuroxime axetil - mannitol and other investigated systems were explained. This study of the polymorphic transformation of the crystalline form of cefuroxime axetil and its binary systems with excipients after exposure to increased temperature and humidity indicated a conversion towards the amorphous form or the coexistence of both forms.