Evaluation of Cone-Beam Computed Tomography Scans to Develop a Staging Method of External Carotid Artery Calcification.

Background: The objective of this study was to develop a practical staging method for reporting external carotid artery calcifications (ECACs) using cone-beam computed tomography (CBCT) imaging, specifically to standardize reporting for oral and maxillofacial radiologists. Methods: This retrospective study evaluated 489 CBCT scans for the presence of ECACs. Two calibrated evaluators assessed the scans in all three orthogonal planes, using the axial plane to develop the staging system. Calcifications were graded on a scale from 0 to 5. Results: ECACs were found in 170 out of 489 scans (34.7%). There was a statistically significant increase in ECAC distribution with age progression. The prevalence of ECACs was similar between genders. Grade 1 calcifications were most common in the 51-60 age group, Grade 2 in the 61-70 and 71-80 groups, and Grades 3 and 4 in the 81-90 group. No Grade 5 calcifications were observed in any age group. The inter-rater reliability showed an excellent correlation in the identification and grading of ECACs. Conclusions: The proposed grading system enables oral and maxillofacial radiologists to quantitatively report ECACs, facilitating timely referrals to physicians for further evaluation and early intervention, thereby potentially reducing the risk of cardiovascular events.

Positional, morphologic, and volumetric differences in TMJ in unilateral posterior crossbites and controls: A retrospective CBCT study.

OBJECTIVES: The objective of this study was to evaluate if there are any morphologic, positional, and volumetric differences in the temporomandibular joint (TMJ) of patients with unilateral posterior crossbite (UPC) compared to controls. Another objective was to analyse the discrepancy in the TMJ between the crossbite versus non-crossbite side in UPC versus right and left sides in controls. Additionally, this study aimed to evaluate the differences in the bone density at the masseteric insertion site at the angle of mandible in the UPC group and control group. MATERIAL AND METHODS: One hundred and thirty-two CBCTs were analysed with 66 patients in UPC group and 66 patients in control group (non-crossbite). Temporomandibular joint spaces - Anterior joint space (AJS), Superior joint space (SJS), Posterior joint space (PJS), Medial joint space (MJS), Middle joint space (MiJS), and Lateral joint space (LJS) were measured. Additionally, bone density at angle of mandible and volume of mandibular condyle were evaluated. The measurements were compared between the groups as well as between the crossbite and non-crossbite sides within the UPC group and between right and left sides within the control group. Furthermore, the associations between UPC and changes in TMJ regarding joint space availability, bone density, condylar head volume, and the effects of sex and age were evaluated using regression analysis. RESULTS: It was observed that UPC group showed a greater condylar volume, than the control group. Additionally, a larger mean discrepancy was observed between the crossbite side and non-crossbite side within the UPC group concerning condylar volume than controls. Concerning age, condylar volume was observed to be larger in adults than children. Adults showed significantly greater bone density and condylar volume than adolescents. Concerning sex, it was observed that males showed a larger SJS (right), MiJS, LJS, and bone density at the mandibular angle than females. CONCLUSION: There is a difference in the TMJ parameters particularly condylar volume in patients with UPC compared to controls.

Does the Outcome of Graft Materials at Dental Implant Sites Differ Between Patients With Normal and Compromised Bone Health?

The objective of this paper was to assess the outcome of bone graft material at alveolar bone augmentation sites combined with dental implants in postmenopausal women with compromised bone health by evaluating cone beam computerized tomography (CBCT) scans at multiple time points.CBCT scans were analyzed on 55 postmenopausal women with compromised bone health status to determine the fate of alveolar bone augmentation. CBCT scans were taken immediately after surgery and 9 and 24 months postoperatively. The patient's medication regimens and durations were recorded, and the pixel intensity value (PIV) was measured and standardized using scoring criteria and visual assessment. Statistical analyses included 2-sample t tests for continuous variables and Fisher's exact tests for categorical variables.Among the normal patients, 73% received a grade 2 visual score, and 27% received a grade 1 visual score. After 24 months, 45% of patients received a grade 2 score, and 27% received a grade 3 score. In the osteoporotic group receiving medication, 77% of participants received a grade 1 visual score at the 9-month postoperative evaluation, while 23% received a grade 2 score. At the 24-month assessment, 55% of patients received a grade 1 score, 41% received a grade 2 score, and only 5% received a grade 3 score. Notably, although the graft material did not remodel into native bone, it was a scaffold for implants in controlled osteoporotic patients. The study's results show that the pixel intensity values of particulate graft materials are similar across the three different time points, suggesting that the graft material's pixel intensity value remains constant in postmenopausal women with osteoporosis. The study's limitations include a small sample size and a restricted 24-month follow-up period. This limited time frame may need to capture long-term changes or variations in graft materials adequately. Future research should include a larger sample size and have a longer follow-up duration to provide a more comprehensive understanding of the change in graft materials between patients with normal and compromised bone health.

Evaluation of a 3D-Printed Cleft Palate Obturator Using a Low-Dose Cone Beam Computed Tomography Acquisition Protocol: A Proof-of-Concept Study.

Cone beam computed tomography (CBCT) technology is increasingly utilized in the head and neck region and is valuable in treatment planning for cleft palate patients, potentially enabling the creation of 3D-printed obturators to assist with feeding and speech. This technical report investigates the feasibility of using data from a 360-degree CBCT scan to accurately produce a cleft palate obturator and assesses whether a lower-dose 180-degree CBCT scan can achieve a comparable result. A simulated cleft palate was crafted on a dehydrated human skull, which was then scanned using both 360-degree and 180-degree CBCT scanning protocols. Two obturators were digitally designed based on the segmented images from each scan and subsequently 3D printed. Evaluation of the segmented images and 3D-printed obturators from both protocols demonstrated clear visualization of anatomical landmarks and identical scores across all parameters, suggesting that the 180-degree CBCT scan can produce an obturator of comparable quality to that of the 360-degree scan, with the added benefit of reduced radiation exposure.

The Utility of Cone Beam Computed Tomography Scans in Diagnosing and Treating Anterior Lesions of the Maxilla and Mandible.

BACKGROUND: The standard screening protocol for radiographic examination in dentistry as per the American Dental Association recommendations is a panoramic radiograph (PAN) and four horizontal bitewings. PAN inherently suffers from several shortcomings like the superimposition of anatomic structures, especially of the cervical spine that obscures a significant portion of the anterior maxilla and mandible. This region has a significant amount of pathology that is not adequately imaged. Three-dimensional (3D) imaging provides circumferential information on the area of interest and adds value to the diagnosis and treatment planning of pathology, especially in the anterior maxilla and mandible. However, there is not an adequate number of well-designed studies that articulate the true value addition of 3D imaging for the evaluation of this region. OBJECTIVES: The objective of this study is to evaluate the value addition of 3D imaging in diagnosing pathologies in the anterior maxilla and mandible when compared to two-dimensional PAN. MATERIALS AND METHODS: A total of 25 cases that had a diagnosis of anterior pathology and had both a PAN and a cone beam computed tomography (CBCT) scan were collected for this study. An institutional review board approval to retrospectively evaluate these data was obtained. The PAN and CBCT scans were randomly evaluated by a second-year dental student, an oral and maxillofacial radiology resident in training, and a board-certified oral radiologist. The scans were evaluated using a three-point modified Likert scale, where 1 represents "not visible or clear," 2 represents "visible but not clear," and 3 represents "visible and clear." The lesions were evaluated for characteristics like lesion location, size & shape, internal contents, borders of the lesion, cortical integrity, locularity, and effect on adjacent structures like root resorption. After the evaluation was completed, a comparison of the lesion diagnosis was done with histopathology to confirm the diagnosis. The evaluators were also asked to comment on the specific feature that 3D imaging provided that added value to the case. Kappa analysis was done to evaluate inter-operator reliability. RESULTS: PAN demonstrated significantly lower efficacy in identifying and diagnosing lesions. Only 56% of cases were analyzed using PAN, with 44% deemed undetectable or poorly visualized. These challenging cases necessitated CBCT scans for accurate diagnosis, which successfully diagnosed all 25 cases. The p-value of 0.0002 for PAN implies a highly significant difference from histopathology, suggesting the distinctions are not due to chance. Conversely, the p-value of 0.3273 for CBCT implies that observed differences may be random, lacking sufficient evidence to reject the null hypothesis. CBCT scans consistently outperformed PAN in visualizing various lesion characteristics, underscoring their superior diagnostic capabilities. CONCLUSIONS: In this study, with a small sample size, 3D imaging provided a significant value addition to the diagnosis and treatment planning by providing additional information regarding the location, extent, internal content, and effect on adjacent structures. The practical implications for clinical settings, along with comparisons to current literature, underscore the study's distinctiveness.

Prescription of panoramic radiographs in children using age-based prevalence of dental anomalies and pathologies.

BACKGROUND: Panoramic radiographs (PRs) are used in the detection and diagnosis of developmental dental anomalies and pathologies (DDAPs) in children. AIM: The primary objective of this observational cohort study was to evaluate the age-based prevalence of DDAP on PRs, whereas the secondary objective was to determine a threshold age for the detection of DDAP to provide supportive evidence for the prescription of PR in paediatric dental practice. DESIGN: The study examined diagnostic PRs from 581 subjects aged 6 to 19 years. All PRs were reviewed by experienced, calibrated, masked examiners for the identification or presence of anomalies in size, shape, position, structure, and other developmental anomalies and pathologies (ODAP) of the face-neck region in a standardized condition. The data were statistically analyzed for interpretation. RESULTS: Overall, 74% (n = 411) of the cohort had at least one anomaly (shape anomaly: 12%, number anomaly: 17%, positional anomaly: 28%, structural anomaly: 0%, and ODAP: 63%). The optimal Youden index cutoff for any anomaly was 9 years. Twelve and 15 years also showed predictive ability. CONCLUSION: The results suggest that PRs should be prescribed at ages 9, 12, and 15 years for the diagnosis of DDAP.

Newly Developed Low Dose 180-degree CBCT Protocol Reduces Radiation Dose Without Compromising Diagnostic Value.

PURPOSE: To compare the standard 360-degree CBCT acquisition protocol to the low dose 180-degree CBCT protocol for implant planning. MATERIALS AND METHODS: Two groups of patients, each consisting of 35 patients, were included in the study. The first group was imaged with the conventional 360-degree CBCT protocol, and the second group was imaged with the low dose 180-degree CBCT protocol. The primary outcome of this study was the number of scans that needed to be repeated due to poor image quality. In addition, six secondary parameters were evaluated quantitatively and qualitatively. RESULTS: The results showed that there was no need to repeat any of the CBCT scans that were obtained in either group, which showed that 360-degree and 180-degree protocols had comparable image quality. As for the secondary parameters, the results showed that the evaluators were able to evaluate the six chosen parameters in a comparable manner. CONCLUSIONS: The 180-degree low dose CBCT scan is a viable option for dental implant treatment planning in the posterior mandible as it provides comparable and adequate information regarding accuracy of measurements, identification of critical structures, evaluation of bone quality, and any pathology.

Skeletal and Dentoalveolar Changes With Mandibular Expansion in Growing Children.

Introduction The primary objective of this study was to quantitatively analyze the skeletal and dentoalveolar parameters following the mandibular expansion with a banded appliance. It was also part of the study to evaluate the amount of dental expansion and assess the change in the intermolar and individual first molar angulation. The basal bone parameters were compared to assess the skeletal effect of removable mandibular expansion appliance therapy. Methods In this retrospective cone beam computed tomography (CBCT) study, a total of 80 subjects with mandibular expansion therapy were screened. After imposing inclusion/exclusion criteria, 70 patients (40 females and 30 males) with a mean age of 8.8±1.24 years and 4.79±3.59 months were included. The mean expansion period was 3.04±1.61 months. Skeletal parameters such as buccal cortical thickness, buccal bone width, and cortical density were measured at 2mm from the alveolar crest, mid-root, and apex region in the coronal slice at the level of the mesiobuccal root of the first molar. Expansion parameters such as intermolar width, intermolar angulation, and individual molar angulation were also measured in the same slice. Finally, basal bone parameters such as inter-mental foramina distance and anterior arch perimeter were recorded. Results No significant difference (p>0.05) was found for most skeletal parameters following the expansion, except for the mid-root buccal bone width (p<0.05). On average, 4.54±2.53 mm of dental expansion (p<0.05) was achieved at the first molar region. Individual molar angulation showed a statistically significant difference (right = 7.46±7.91°, left = 7.53±7.18°, p=<0.05). The basal bone parameters showed no significant difference (p>0.05). Conclusions The mandibular expansion device leads to an increase in intermolar distance. The amount of expansion achieved with such devices is due to the buccal tipping of the molars. Skeletal effects such as cortical thickness, buccal bone width, or changes in the basal bone dimensions should not be expected with mandibular expansion therapy.

Prevalence and Clinical Significance of Incidental Findings in the Maxillofacial Complex of Adolescent Orthodontic Patients: A Retrospective Cone Beam Computed Tomography Analysis.

OBJECTIVES: The aim of this study was to determine the prevalence and severity of incidental findings in the maxillofacial complex of orthodontic patients imaged with cone beam computed tomography (CBCT) and assign those findings an appropriate clinical significance. METHODOLOGY: Incidental findings (IF) were identified in 250 CBCT scans of adolescent orthodontic patients (aged 13-18 years) with a large field-of-view and categorized based on their anatomic location and placed into one of six subgroups based on anatomic region: i) sino-nasal, ii) dentoalveolar, iii) nasooropharyngeal airway, iv) temporomandibular joint, v) neck, vi) calcifications, and vi) miscellaneous findings. Additionally, findings were assigned a clinical significance score based on severity on a scale of mild, moderate and severe. Mild IF was defined as an IF that does not require any further investigation or referral. Moderate IF was defined as an IF that has the tendency to become clinically significant and should be observed periodically. IFs that warrant further investigation and/or intervention were designated as severe. RESULTS: The percentage of IFs in sino-nasal and dento-alveolar regions were 44.7% and 19.1% respectively. The percentage of IFs with mild, moderate, and severe clinical significance were 27%, 72%, and 1%, respectively. Out of the IFs involving calcifications, 80.8% were stylohyoid calcifications and <1% were cranial cavity IFs such as petroclinoid calcifications and falx cerebri calcifications. Among the sino-nasal findings, 1.2% were identified as severe. CONCLUSION: The sino-nasal region had the highest frequency of IFs. Understanding the prevalence of incidental findings and its clinical relevance is important for clinicians to allow for appropriate monitoring and timely treatment of patients.

Evaluation of Skeletal and Dentoalveolar Changes in Patients With Class II Div 1 Malocclusion Treated With Twin Block Appliance.

Objective The study was focused on evaluating the change in mandibular morphology following the Twin Block appliance therapy and recording its effect on the maxilla and maxillary dentoalveolar complex. Also, the results of the Twin Block appliance between males and females were compared.  Material and methods In this two-armed retrospective cephalometric study, 30 patients (mean age 12 years) treated with Twin Block appliance for the period of 8-12 months were chosen, and their records were obtained to analyze. These results were compared with 15 control subjects of the same age group chosen from the American Association of Orthodontics Foundation (AAOF) growth legacy collection: Michigan Growth Study Class II subjects. Cephalometric tracing was done, and data was processed for descriptive statistical analysis. Results Paired sample t-test and ANOVA test were performed to evaluate the differences in the pre-treatment (T1) and post-functional (T2) values. ∠ANB showed a mean difference of -4.71°±1.55° for males and 6.22°±6.78° for females, which is significant. The mandibular length (Co-Gn), for male subjects, the mean difference was 5.14±1.74 mm, and for female subjects, it was 6±2mm, which is highly significant; 49.88% of skeletal changes and 50.12% of dentoalveolar changes were reported to bring about Class II correction with Twin Block. Conclusion A successful increase in mandibular length was achieved using a Twin Block as a functional appliance. Also, the significant maxillary restraining effect was recorded. More skeletal changes were observed in males than females.

Accuracy of Anatomical Depictions in Cone Beam Computed Tomography (CBCT)-Reconstructed Panoramic Projections Compared to Conventional Panoramic Radiographs: A Clinical Risk-Benefit Analysis.

INTRODUCTION: Two-dimensional (2D) radiographs are the standard of care for diagnosis and treatment planning in the day-to-day practice of dentistry. With the growing popularity of cone beam computed tomography (CBCT), it is now becoming the standard of care in many areas of general dentistry due to its ability to create non-linear projections from volumetric data. The CBCT-generated non-orthogonal radiographs can serve as easy-to-use 2D and three-dimensional (3D) diagnostic tools and offer a similar experience for diagnosis as conventional 2D images. The aim of this study is to compare the accuracy of conventional radiographs and CBCT-generated projections to identify relevant anatomic landmarks and their associated variants. METHODS: Thirty-two patients referred to the University of Connecticut School of Dental Medicine's Advanced Imaging Center were selected for this retrospective analysis. Nineteen anatomical landmarks were retrospectively assessed on conventional panoramic and CBCT scans generated panoramic radiographs using two different digital imaging and communications in medicine viewers. A total of 1,216 anatomical landmarks were evaluated by two oral and maxillofacial radiologists to assess the accuracy and consistency of the depiction of radiographic anatomy. RESULTS: There was a very good agreement between the two evaluators with a Cohen's kappa value of 0.934. McNemar change test concluded that the anatomical assessment values compared between conventional panoramic and CBCT-generated panoramic radiographs are similar. CONCLUSION: This study showed that CBCT-generated panoramic images are comparable to conventional panoramic radiographs in identifying anatomical landmarks typically evaluated using a conventional panoramic projection. In addition, they have the added advantage of having 3D information in the acquired volume to better evaluate the area of interest. In clinical situations where a mid- to large-volume CBCT scan is available, a simulated panoramic image can be generated using the CBCT volume, leaving exposure of the patient to the additional radiation of a panoramic image unnecessary.

Comparative Evaluation of a Lower-Dose CBCT Acquisition Protocol for Preoperative Implant Site Assessment in Dry Human Skulls: A Proof-of-Concept Study.

Restoration of edentulous sites with dental implants is increasingly becoming a popular choice. Cross-sectional 3-dimensional imaging using cone-beam computed tomography (CBCT) provides a better depiction of the implant site to help the clinician plan the procedure better. In spite of the advantages, radiation dose will always remain a concern. The evolution of lower-dose protocols is ongoing, but whether those acquisition protocols yield comparable diagnostic information is still not well established. The objective of this study was to evaluate the diagnostic efficacy of a low-dose, 180° rotational CBCT acquisition protocol for evaluating a potential implant site in comparison with a conventional 360° rotational acquisition. Ten dentate and partially edentulous dry human skulls providing 82 randomized implant sites-40 in the maxilla and 42 in the mandible-were chosen for this study. Each skull was imaged using a 360° and a 180° rotational acquisition on a J. Morita Accuitomo CBCT scanner. Evaluation of cortical and trabecular bone, height, width, and proximity to critical structures, such as the inferior alveolar nerve canal and the maxillary sinus, were measured. An oral surgeon and an oral radiologist rated the diagnostic efficacy of the scans by evaluating the above characteristics. Statistical evaluation of the data with linear regression showed significant agreement between both protocol measurements. Kappa analyses yielded a good interobserver agreement. In this proof-of-concept study, CBCT imaging using the lower-dose, modified arc, and 180° acquisition protocol shows comparable results to the conventional 360° protocol for preoperative implant assessment.

Radiographic Evaluation of Medication-Related Osteonecrosis of the Jaw (MRONJ) With Different Primary Cancers and Medication Therapies.

BACKGROUND: Medication-related osteonecrosis of the jaw (MRONJ) is a condition that affects the jaws and is characterized by exposed bone in the oral cavity that persists for more than eight weeks despite treatment. Additional criteria include that the patient should have a current or past history of antiresorptive drugs and/or in combination with antiangiogenic drugs, absence of metastasis, and no previous radiotherapy to the affected area. The radiographic features of MRONJ in most instances do not have any specific radiographic features. This is because standard radiographs usually show no stark abnormalities in the early stages of the disease. OBJECTIVE: The study aimed to evaluate if any specific radiographic patterns are associated with primary cancers and between medications. MATERIALS AND METHODS: The study is an observational case series. A total of 50 cases of possible osteonecrosis from June 2010 to June 2013 archives of the Department of Oral and Maxillofacial Radiology were assessed. Based on the history, 12 cases that had a history of medication use that could lead to medication-related osteonecrosis of the jaw (MRONJ) were selected. Cone beam computed tomography (CBCT) scans of these 12 cases were evaluated using the CBCT reconstruction program InVivo Dental version 6 (Anatomage Inc., San Jose, CA, USA). The number of areas showing sequestration, the pattern of osteonecrosis, and the extent were assessed. Primary cancer and the type of medication were also assessed to identify if certain cancers or drugs showed any distinctive pattern of osteonecrosis. Reconstructed panoramic images and true three-dimensional (3D) multi-planar images were assessed to study the condition. An oral and maxillofacial radiology resident in training and a board-certified oral and maxillofacial radiologist assessed the images. RESULTS: Radiographic findings varied among the 12 cases and included generalized sclerosis, osteosclerosis with widened periodontal ligament (PDL) space, bony sequestra, and bony necrosis. However, no specific or distinctive radiographic patterns were observed in any of the cases, regardless of the type of primary cancer or medication used. CONCLUSION: It is challenging to radiographically distinguish between MRONJ cases with different primary cancer and/or medication. FUTURE DIRECTIONS: Future studies should include evaluating larger samples with varying primary cancers and medications and combination drug therapies. Cases in an advanced stage of MRONJ do not have distinctive features due to extensive destruction and superimposed infection; it may be valuable to evaluate patients in the early stages of MRONJ to better understand distinguishing radiographic patterns specific to certain primary cancers or medications.

Can convolutional neural networks identify external carotid artery calcifications?

OBJECTIVE: We developed and evaluated the accuracy and reliability of a convolutional neural network (CNN) in detecting external carotid artery calcifications (ECACs) in cone-beam computed tomography scans. STUDY DESIGN: Using TensorFlow, we developed a program to identify calcification in 427 cone-beam computed tomography scans evaluated to determine the presence of ECACs. We compared the results to the findings of a human evaluator. Using an 80:20 training-to-validation ratio, we calculated the k-fold cross-validation accuracy of the initial dataset and extrapolated the F1 score and Matthews Correlation Coefficient. RESULTS: We calculated a k-fold cross-validation accuracy of 76%, with a recall and precision of 66% and 79%, respectively, and a combined F1 score of 0.72. We extrapolated a Matthews correlation coefficient of 0.53, showing a strong balance between confusion matrix categories. CONCLUSION: Our CNN model can reliably identify ECACs in cone-beam computed tomography scans.

Comparative evaluation of a lower dose CBCT acquisition protocol for preoperative implant site assessment in dry human skulls.

Restoration of edentulous sites with dental implants is increasingly becoming a popular choice. Cross-sectional 3D imaging using CBCT provides a superior view of the implant site to help the clinician plan the procedure better. In spite of the advantages, radiation dose remains a concern. The evolution of lower dose protocols is ongoing but whether those acquisition protocols yield comparable diagnostic information is still not well established. The objective of this study was to evaluate the diagnostic efficacy of a low dose, 180˚ rotational CBCT acquisition protocol for evaluating a potential implant site in comparison with a conventional 360˚ rotational acquisition. Ten dentate and partially edentulous dry human skulls were chosen for this study. Each skull was imaged using a 360˚ and a 180˚ rotational acquisition on a J. Morita's Accuitomo CBCT scanner. 82 randomized implant sites, 40 in the maxilla and 42 in the mandible were analyzed. Evaluation of cortical and trabecular bone, proximity to crucial structures such as the inferior alveolar nerve canal and the maxillary sinus, and width of the potential placement site were measured. An oral surgeon and an oral radiologist rated the diagnostic efficacy of the scans by evaluating the above characteristics. Statistical evaluation of the data with linear regression showed significant agreement between both protocol measurements. Kappa analyses yielded a good inter-observer agreement. In this ex-vivo study, there was no significant difference in both the qualitative and quantitate evaluation between the conventional 36 0˚ acquisition protocol and  the modified lower dose 180˚ rotational protocol.

Evaluation of near-infrared Raman spectroscopy in the differentiation of cortical bone, trabecular bone, and Bio-Oss bone graft: an ex-vivo study.

OBJECTIVE: We evaluated the ability of near-infrared Raman spectroscopy (near-IR RS) to differentiate among cortical bone, trabecular bone, and Bio-Oss, a bovinebone-based graft material. STUDY DESIGN: We obtained a thinly sliced section of the mandible to collect cortical and trabecular bone samples and placed compacted Bio-Oss bone graft into a partially edentulous mandible in a dry human skull to obtain a comparable Bio-Oss sample. We performed near-IR RS of the 3 samples and evaluated the resultant Raman spectra to evaluate their differences. RESULTS: We identified 3 sets of spectroscopic markers that differentiated Bio-Oss from human bone. The first consisted of significant shifts in the location of the 960 cm-1 phosphate (PO43-) peak and a reduction in its width, suggesting that Bio-Oss is more crystalline than bone. The second was the reduced carbonate content of Bio-Oss compared to bone, as determined from the 1070 cm-1/960 cm-1 peak area ratio. The final marker was the lack of collagen-associated peaks in Bio-Oss compared to cortical and trabecular bone. CONCLUSIONS: Near-IR RS can reliably differentiate human cortical and trabecular bone from Bio-Oss via 3 sets of spectral markers associated with mineral crystallinity, carbonate content, and collagen content that differ significantly between them. Integrating this modality into dental practice may assist in implant treatment planning.

The Readiness of ChatGPT to Write Scientific Case Reports Independently: A Comparative Evaluation Between Human and Artificial Intelligence.

The use of artificial intelligence (AI) in scientific publishing has gained increased attention, and one AI tool that has been the subject of much discussion is ChatGPT. It is a large language model (LLM) built on the OpenAI platform that aims to emulate human-like writing and continually improves through user interactions. In this paper, ChatGPT's performance was assessed in medical publishing by comparing it to a case report written by oral and maxillofacial radiologists. ChatGPT was tasked with writing a case report based on a drafted report written by the authors in five different prompts. The findings of this study highlight issues related to the accuracy, completeness, and readability of the generated text. These results have significant implications for the future use of AI in scientific publishing and suggest that in the current iteration of ChatGPT, scientific information must be revised by an expert.

Newly Developed Low Dose 180-degree CBCT Protocol Reduces Radiation Dose Without Compromising Diagnostic Value.

PURPOSE: To compare the standard 360-degree CBCT acquisition protocol to the low dose 180-degree CBCT protocol for implant planning. MATERIALS AND METHODS: Two groups of patients, each consisting of 35 patients, were included in the study. The first group was imaged with the conventional 360-degree CBCT protocol, and the second group was imaged with the low dose 180-degree CBCT protocol. The primary outcome of this study was the number of scans that needed to be repeated due to poor image quality. In addition, six secondary parameters were evaluated quantitatively and qualitatively. RESULTS: The results showed that there was no need to repeat any of the CBCT scans that were obtained in either group, which showed that 360-degree and 180-degree protocols had comparable image quality. As for the secondary parameters, the results showed that the evaluators were able to evaluate the six chosen parameters in a comparable manner. CONCLUSION: The 180-degree low dose CBCT scan is a viable option for dental implant treatment planning in the posterior mandible as it provides comparable and adequate information regarding accuracy of measurements, identification of critical structures, evaluation of bone quality, and any pathology.

A Three-Dimensional (3D) Evaluation Unveiling if the Anterior Mandible Is Truly a Safe Zone for Implant Placement.

Background Dental implants are increasingly being used in the rehabilitation of the edentulous areas in the maxilla and mandible. The anterior mandible is considered a safe zone for implant placement, but clinicians often find it challenging to control bleeding in this area. This is due to the presence of the sublingual artery, which can be of varying dimensions and can cause severe bleeding. This can be of higher significance in patients with high or uncontrolled blood pressure and in patients on blood thinners like Aspirin or Coumadin where establishing a clot can be difficult. With newer guidelines recommending that medication be discontinued only a few hours before surgery and that bleeding be managed locally, this issue has become even more challenging. With three-dimensional (3D) imaging using cone beam computed tomography (CBCT) becoming more common for implant planning, the presence of the sublingual artery can be evaluated and incorporated into the treatment plan. The objective of this study is to evaluate the 3D location of the sublingual artery in the edentulous anterior mandible of CBCT scans of patients referred for dental implant therapy. Methodology A total of 50 de-identified CBCT scans with an edentulous anterior mandible referred for dental implant therapy were evaluated for this study. Cross-sectional images were generated using a CBCT reconstruction program INVIVO-5 (Anatomage, San Jose, CA, USA). After the sublingual artery was localized, measurement was conducted from a standardized point on the alveolar crest to the artery's entry point on the lingual aspect. Measurements were also obtained from the terminal point of the artery's course to the buccal cortical plate. Alveolar crest can either resorb or be subjected to alveoloplasty during implant placement, similar measurements were also done from a standardized point on the inferior cortical border of the mandible to the artery's entry points on the lingual aspect. Two oral and maxillofacial radiologists conducted all measurements. Results It was found that the median value of the sublingual artery from the alveolar crest to the level of entry (V1) was 6.78, the vertical measurement of the artery coursing into the alveolar bone was ~4.03 mm (V2), the vertical measurement of the artery's position within the alveolar bone at the terminal point form the crest was ~11.71 (V3), and the inferior vertical measurement from the course of the artery to the inferior border of the mandible was 9.60 mm. The artery extended about ~8.3 mm within the alveolar bone from the lingual cortex (H1), and the artery was located about 4.97 mm away from the buccal cortex (H2). Cronbach's Alpha test showed high interoperator reliability.  Conclusions In this retrospective study, the sublingual artery was noted to be at a critical location in the potential implant site. A site-specific evaluation using CBCT can help in localizing and avoiding perforation of the sublingual artery.

Shifting the Spotlight From the Mandibular Condyle to the Coronoid Process: A Report of a Unique Case of Trifid Mandibular Coronoid Process.

The trifid mandibular coronoid process is an uncommon finding characterized by three projections arising from the mandibular ramus instead of a single triangular coronoid process. Previous authors reported cases of the bifid coronoid process. The authors referred to them as the bifid/second/double coronoid process. This article aims to report a unique case of a trifid coronoid process incidentally detected during radiographic evaluation for implant planning. This article also emphasizes the effectiveness of cone beam computed tomography (CBCT) volume rendering as a valuable tool in demonstrating morphological variations such as the trifid coronoid process. In addition, we discussed possible etiologies for the trifid coronoid process. To the best of our knowledge, this is the first case of the trifid coronoid process.