Multiscale Characterization at Early Ages of Ultra-High Performance Geopolymer Concrete.

The main obstacle of using geopolymer as a construction repair material is its slow strength development rate, which is the most significant attribute of an early-age opening for traffic and striking-off formwork. Geopolymer technology has recently attracted huge interest as an alternative to traditional cementitious materials with low environmental impact. Thus, this study investigates the feasibility of developing an ultra-high performance geopolymer concrete (UHPGC) with the aim of achieving high early-age strength. For this purpose, UHPGC mixtures activated with different potassium hydroxide molarities and aluminosilicate material types were developed and examined being cured with different curing temperatures. The early strength and durability of the UHPGC after 8 and 24 h were investigated. Experimental results revealed that the optimal mix design of UHPGC corresponds to a KOH molarity of 16 M and a 30% silica fume content. Furthermore, former mixture cured at 100 °C gave superior 8 and 24 h early strength values of 79 and 134 MPa, respectively. Moreover, a superior interaction of slag, silica fume, and activator solution at early age for UHPGC is revealed by the microstructural characteristics examined by a field emission scanning electron microscope (FESEM) with energy dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy analysis, and thermogravimetric (TGA) techniques. It was also found that the compressive strength results and the results of the microstructure analysis are well coincided. The experimental results obtained in this study emphasize the feasibility of using developed UHPGC as an eco-friendly quick repair materials The development of one-part UHPGC as a quick, cost-effective, and high-strength product for all construction repair maintenance will lead to huge improvements in the structural capacity and durability of structural components.

Long-Term Performance of Concrete Made with Different Types of Cement under Severe Sulfate Exposure.

Concrete sulfate attack is of great interest as it represents one of the main reasons of concrete deterioration and poor durability for concrete structures. In this research, the effect of different cement types on concrete sulfate resistance was investigated. This included three concrete classes, namely, low strength concrete, medium strength concrete, and high strength concrete. Blast furnace cement (BFC), sulfate resisting Portland cement (CEM I-SR5), and ordinary Portland cement (OPC) were used in a total of eighteen concrete mixes. Three binder contents of 250 kg/m3, 350 kg/m3, and 450 kg/m3 and a constant silica fume (SF) content were applied in this experimental study. The water/binder (w/b) ratio was varied between 0.4 and 0.8. Concrete specimens were immersed in highly severe effective sodium sulfate solutions (10,000 ppm) for 180 days after standard curing for 28 days. The fresh concrete performance was evaluated through a slump test to attain proper workability. Concrete compressive strength and mass change at 28 days and 180 days were measured before and after immersion in the solution to evaluate the long-term effect of sulfate attack on the proposed concrete durability. Scanning electron microscopy (SEM) analysis was conducted to study the concrete microstructure and its deterioration stages. The obtained results revealed that BFC cement has the best resistance to aggressive sulfate attacks. The strength deterioration of BFC cement was 3.5% with w/b of 0.4 and it increased to about 7.8% when increasing the w/b ratio to 0.6, which are comparable to other types of cement used. The findings of this research confirmed that the quality of concrete, specifically its composition of low permeability, is the best and recommended protection against sulfate attack.

Producing Heavyweight High-Performance Concrete by Using Black Sand as Newly Shielding Construction Material.

Experimental work was carried out to study new fine aggregate shielding construction materials, namely black sand (BS). The BS effect on the mechanical, durability, and shielding characteristics of heavyweight high-performance concrete (HWHPC) was evaluated. This study aimed at improving various HWHPC properties, concertedly. Fifteen mixtures of HWHPC were made, with various variables, including replacing 10% and 15% of the cement with fly ash (FA) and replacing normal sand by BS at various contents (15%, 30%, 45%, 60%, 75%, and 100%). The test specimens were subjected to various exposure conditions, including elevated temperatures, which ranged from 250 °C to 750 °C, for a duration of 3 h; magnesium sulfate (MS) exposure; and gamma-ray exposure. The effects of elevated temperature and sulfate resistance on concrete mass loss were examined. The results revealed that BS is a promising shielding construction material. The BS content is the most important factor influencing concrete compressive strength. Mixes containing 15% BS demonstrated significantly better strength compared to the control mixes. Exposure to 250 °C led to a notable increase in compressive strength. BS showed a significant effect on HWHPC fire resistance properties, especially at 750 °C and a significant linear attenuation coefficient. Using 10% FA with 15% BS was the most effective mixing proportion for improving all HWHPC properties concertedly, especially at greater ages.