Proximal tibiofibular joint (PTFJ) dislocation due to Ehlers-Danlos syndrome: posterolateral open-wedge high tibial osteotomy combined with medial closed-wedge distal femoral osteotomy can correct the severe valgus deformity with a markedly increased tibial posterior slope.

Ehlers-Danlos syndrome (EDS) causes joint hypermobility and joint dislocation. Since there are no reports of proximal tibiofibular joint (PTFJ) dislocation caused by EDS, little is known about the long-term course of this disease. A woman in her 40s presented with a posterolaterally depressed tibial condyle and severe valgus deformity caused by a long-standing PTFJ dislocation due to EDS. Considering the pathology, posterolateral open-wedge high tibial osteotomy (PLOWHTO) and medial closed-wedge distal femoral osteotomy were performed according to the deformity analysis. A favourable short-term clinical outcome was obtained and the PTFJ dislocation was reduced over time. Although PLOWHTO has several pitfalls, it is a logical and useful surgical technique that can help treat posterolateral dysplasia of the tibial plateau concomitant with severe valgus deformity, regardless of joint laxity, if performed with attention to pitfalls.

Importance of Three-Dimensional Evaluation of Surgical Transepicondylar Axis in Total Knee Arthroplasty.

In total knee arthroplasty, the surgical transepicondylar axis (SEA) is one of the most reliable rotation axes for stabilizing of the patellofemoral joint. The SEA is identified with reference to the lateral epicondyle and the medial sulcus of the medial epicondyle. However, these two structures rarely appear on the same plane on computed tomography (CT), and it is necessary to take two points in separate images. Many surgeons measure the SEA on the same image (pseudo SEA) instead. We aimed to determine the difference between true SEAs and pseudo SEAs. A total of 31 normal knees and 24 varus knees were included in this study. Three-dimensional (3D) models of the femur were reconstructed from CT images, and a reconstructed plane was made using the International Society of Biomechanics coordinate system. Pseudo SEAs drawn in the plane passing through the lateral epicondyle and medial sulcus were defined as l-SEA and m-SEA, respectively. L-SEA, m-SEA, true SEA, and posterior condylar axis (PCA) were projected onto the International Society of Biomechanics coordinate plane and, "p l-SEA," "p m-SEA," "p true SEA," and "p PCA" were obtained. The true SEA angle was defined as the angle between p true SEA and p PCA. The l-SEA angle or m-SEA angle was defined as the angle between the p l-SEA or p m-SEA and p PCA, respectively. There were no statistically significant differences between true SEA angle (2.64 ± 2.01 degrees) and pseudo SEA angle (l-SEA angle: 2.74 ± 2.07 degrees, m-SEA: 2.54 ± 2.19 degrees). Conversely, 12 knees in the normal group and 2 knees in the varus group had differences of more than 1 degree (p = 0.01). Among them, 6 knees in the normal group and 0 knees in the varus group had a difference of 2 degrees or more (p = 0.03). In most cases, pseudo SEA can be substituted for true SEA.

Change in leg length after open-wedge high tibial osteotomy can be predicted from the opening width: A three-dimensional analysis.

BACKGROUND: The purpose of this study was to evaluate true change in leg length after open-wedge high tibial osteotomy (OWHTO) using three-dimensional (3D) assessments, examine the factors that influence leg lengthening and verify their validity in clinical practice. METHODS: Study 1: a retrospective case series simulation study, included 46 patients (55 knees) that underwent knee arthroplasty or HTO. OWHTO was simulated from preoperative computed tomography using 3D preoperative planning software. Uni- and multivariate regression analyses were conducted to identify predictors related to change in leg length. Study 2: a retrospective case series study, included 53 patients (55 knees) that underwent OWHTO in another institution. Change in leg length was measured preoperatively and 1 year postoperatively and was compared with the predicted change in leg length calculated using the formula obtained from Study 1. RESULTS: Study 1: the true change in leg length significantly increased and showed a strong correlation with the opening width. The change in leg length was predicted using the formula "change in leg length = opening width × 0.75-1.5." Study 2: the predicted change in leg length showed no significant difference from the change in leg length 1 year postoperatively and a strong correlation with the measured change. CONCLUSIONS: The true change in leg length after OWHTO was predicted using the formula obtained from the 3D model. Predicting the change in leg length preoperatively can be a basis to consider other HTOs.

Antibacterial Activity in Iodine-coated Implants Under Conditions of Iodine Loss: Study in a Rat Model Plus In Vitro Analysis.

BACKGROUND: We developed iodine-coated titanium implants to suppress microbial activity and prevent periprosthetic joint infection (PJI); their efficacy was demonstrated in animal and in vitro models. The iodine content in iodine-coated implants naturally decreases in vivo. However, to our knowledge, the effect of reduced iodine content on the implant's antimicrobial activity has not been evaluated to date. QUESTIONS/PURPOSES: (1) How much does the iodine content on the implant surface decrease after 4 and 8 weeks in vivo in a rat model? (2) What effect does the reduced iodine content have on the antimicrobial effect of the implant against multiple bacteria in an in vitro model? METHODS: This experiment was performed in two parts: an in vivo experiment to determine attenuation of iodine levels over time in rats, and an in vitro experiment in which we sought to assess whether the reduced iodine content observed in the in vivo experiment was still sufficient to deliver antimicrobial activity against common pathogens seen in PJI. For the in vivo experiment, three types of titanium alloy washers were implanted in rats: untreated (Ti), surface-anodized to produce an oxide film (Ti-O), and with an iodine layer on the oxidation film (Ti-I). The attenuation of iodine levels in rats was measured over time using inductively coupled plasma-mass spectrometry. Herein, only the Ti-I washer was used, with five implanted in each rat that were removed after 4 or 8 weeks. For the 4- and 8-week models, two rats and 15 washers were used. For the in vitro study, to determine the antibacterial effect, three types of washers (Ti, Ti-O, and Ti-I) (nine washers in total) were implanted in each rat. Then, the washers were removed and the antibacterial effect of each washer was examined on multiple bacterial species using the spread plate method and fluorescence microscopy. For the spread plate method, six rats were used, and five rats were used for the observation using fluorescence microscopy; further, 4- and 8-week models were made for each method. Thus, a total of 22 rats and 198 washers were used. Live and dead bacteria in the biofilm were stained, and the biofilm coverage percentage for quantitative analysis was determined using fluorescence microscopy in a nonblinded manner. Ti-I was used as the experimental group, and Ti and Ti-O were used as control groups. The total number of rats and washers used throughout this study was 24 and 213, respectively. RESULTS: Iodine content in rats implanted with Ti-I samples decreased to 72% and 65% after the in vivo period of 4 and 8 weeks, respectively (p = 0.001 and p < 0.001, respectively). In the in vitro experiment, the Ti-I implants demonstrated a stronger antimicrobial activity than Ti and Ti-O implants in the 4- and 8-week models. Both the median number of bacterial colonies and the median biofilm coverage percentage with live bacteria on Ti-I were lower than those on Ti or Ti-O implants for each bacterial species in the 4- and 8-week models. There was no difference in the median biofilm coverage percentage of dead bacteria. In the 8-week model, the antibacterial activity using the spread plate method had median (interquartile range) numbers of bacteria on the Ti, Ti-O, and Ti-I implants of 112 (104 to 165) × 105, 147 (111 to 162) × 105, and 55 (37 to 67) × 105 of methicillin-sensitive Staphylococcus aureus (Ti-I versus Ti, p = 0.026; Ti-I versus Ti-O, p = 0.009); 71 (39 to 111) × 105, 50 (44 to 62) × 105, and 26 (9 to 31)× 105 CFU of methicillin-resistant S. aureus (Ti-I versus Ti, p = 0.026; Ti-I versus Ti-O, p = 0.034); and 77 (74 to 83) × 106, 111 (95 to 117) × 106, and 30 (21 to 45) × 106 CFU of Pseudomonas aeruginosa (Ti-I versus Ti, p = 0.004; Ti-I versus Ti-O, p = 0.009). Despite the decrease in the iodine content of Ti-I after 8 weeks, it demonstrated better antibacterial activity against all tested bacteria than the Ti and Ti-O implants. CONCLUSION: Iodine-coated implants retained their iodine content and antibacterial activity against methicillin-sensitive S. aureus, methicillin-resistant S. aureus, and P. aeruginosa for 8 weeks in vivo in rats. To evaluate the longer-lasting antibacterial efficacy, further research using larger infected animal PJI models with implants in the joints of both males and females is desirable. CLINICAL RELEVANCE: Iodine-coated titanium implants displayed an antibacterial activity for 8 weeks in rats in vivo. Although the findings in a rat model do not guarantee efficacy in humans, they represent an important step toward clinical application.

The efficacy of total hip arthroplasty on locomotive syndrome and its related physical function in patients with hip osteoarthritis.

BACKGROUND: Locomotive syndrome (LS) is a predictive factor of future motor dysfunction. Our aim was to evaluate the change in the total LS grade and, its the association with the Japanese Orthopaedic Association (JOA) hip score after total hip arthroplasty (THA) among patients with hip osteoarthritis. METHODS: This was a prospective case-control study of 72 patients who underwent primary THA. The functional outcomes were measured before, and at 6 and 12 months after THA. LS was evaluated using the following tests: stand-up test, 2-step test, and 25-question Geriatric Locomotive Function Scale (GLFS-25). In addition, factors affecting the improvement of LS grade were examined. RESULTS: Prior to THA, 7% and 93% of patients were classified as LS grades 1 and 2. At 6 months after THA, an improvement in the total LS grade was observed in 57% of patients, with this percentage further increasing to 65% at 1 year. Only the preoperative GLFS-25 was correlated with the preoperative JOA hip scores. The postoperative GLFS-25 and the two-step test were correlated with the postoperative JOA hip scores. The preoperative functional reach test (FRT) was significantly correlated with the total LS grade improvement. CONCLUSIONS: THA can improve the total LS grade in 65% of patients at 1 year postoperatively. Improvement was largely achieved in the first 6 months after THA, with a change from LS grade 2 to grade 1. FRT could be used an indicator of the total LS grade improvement.

Periodic injections of adipose-derived stem cell sheets attenuate osteoarthritis progression in an experimental rabbit model.

BACKGROUND: Subcutaneous adipose tissue represents an abundant source of multipotent adult stem cells named as Adipose-derived stem cells (ADSCs). With a cell sheet approach, ADSCs survive longer, and can be delivered in large quantities. We investigated whether intra-articular ADSC sheets attenuated osteoarthritis (OA) progression in a rabbit anterior cruciate ligament transection (ACLT) model. METHODS: Fabricating medium containing ascorbate-2-phosphate was used to enhance collagen protein secretion by the ADSCs to make ADSC sheets. At 4 weeks after ACLT, autologous ADSC sheets were injected intra-articularly into the right knee (ADSC sheets group), and autologous cell death sheets treated by liquid nitrogen were injected into the left knee (control group). Subsequent injections were administered once weekly. Femoral condyles were compared macroscopically and histologically. RESULTS: Macroscopically, OA progression was significantly milder in the ADSC sheets than in the control groups. Histologically, control knees showed obvious erosions in the medial and lateral condyles, while cartilage was retained predominantly in the ADSC sheets group. Immunohistochemically, MMP-1, MMP-13, ADAMTS-4 were less expressive in the ADSC sheets than in the control groups. CONCLUSIONS: Periodic ADSC sheets injections inhibited articular cartilage degeneration without inducing any adverse effects. A large quantity of autologous ADSCs delivered by cell sheets homed to the synovium and protected chondrocytes.

Postsurgical infection from using a computed tomography-based hip navigation system during total hip arthroplasty.

PURPOSE: A computed tomography (CT)-based hip navigation system is a useful tool for achieving precise implant alignment angle. However, it has the disadvantage of prolonged procedure duration. A prolonged procedure duration may increase the incidence of postoperative surgical site infection (SSI) or periprosthetic joint infection (PJI) following primary THA. Studies identifying whether CT-based hip navigation system increases the incidence of SSI and PJI compared to the free-hand technique for total hip arthroplasty (THA) are rare. The study aimed to assess whether the CT-based hip navigation system can cause SSI and PJI compared to the free-hand technique. METHODS: We investigated 366 patients with osteoarthritis who completed the minimum 2-year follow-up and underwent primary THAs (n = 435), including 70 hips in 62 patients of the non-navigation group and 365 hips in 304 patients of the navigation group. We compared the incidence rate of SSI and PJI between the non-navigation group and navigation group. RESULTS: Only three patients in the navigation group (0.8%) developed SSI or PJI, while no patient developed SSI or PJI in the non-navigation group. There was no significant difference in the incidence rate of SSI or PJI between the two groups (P = 1.0), although the mean operation time in the navigation group was about 20 min longer. CONCLUSIONS: CT-based hip navigation system may not be associated with SSI or PJI after primary THA, although it prolongs the operation time.

Influence of pelvic sagittal tilt on 3-dimensional bone coverage in total hip arthroplasty: a simulation analysis.

BACKGROUND: In total hip arthroplasty with computer navigation assistance, cup orientation is generally determined according to the coordinate system relative to the functional pelvic plane (FPP). However, there is a large difference in the cup anteversion between a posterior pelvic tilt relative to the computed tomography (CT) table in the sagittal plane and anterior pelvic tilt, even when the cup is set at the same orientation angle according to each FPP. The present study analysed this difference from the viewpoint of 3-dimensional (3D) coverage of the acetabular component (3D coverage) to determine how the 3D acetabular coverage is altered with changes in pelvic sagittal tilt. METHODS: We analysed 3D-simulated acetabular coverage measured in 3D pelvic models reconstructed from the preoperative CT data of 50 patients. In each patient, we created 5 pelvic models with a sagittal tilt of 10° increments between 20° anterior tilt and 20° posterior tilt relative to the CT table. RESULTS: We found that 3D coverage decreased as the pelvis tilted posteriorly. Particularly, there were significant differences between the pelvis with 20° anterior tilt and that with neutral tilt (p < 0.001). There was also a difference between the pelvis with neutral tilt and that with a 20° posterior tilt (p < 0.01). The mean decrease in 3D coverage between the pelvis with neutral tilt and that with 20° posterior tilt was 7.2 ± 1.6%. CONCLUSIONS: We found that 3D coverage differed among pelvis with different sagittal tilts when the cup orientation angle was determined according to FPP.

Effect of changing femoral head diameter on bony and prosthetic jumping angles.

BACKGROUND: In THA, using a larger femoral head can increase the oscillation angle and jumping distance. However, there have been no reports which indicate precisely how increasing the jumping distance leads to an increase in the angle from impingement to dislocation (jumping angle). In this study, we clarified the jumping angle of various head diameters and its relationship with pelvic morphology. METHODS: Using a three-dimensional templating system, virtual THA and ROM simulations were performed in 82 patients. We investigated the distance between bony and prosthetic impingement points and the head centre and calculated the jumping angle for various head diameters. We measured various pelvic shapes and length to clarify the relationship between pelvic morphology and impingement distance. RESULTS: Jumping angles were 7.7° ± 3.2°, 12.1° ± 1.6°, 15.4° ± 2.5° and 10.0° ± 3.0° with flexion, internal rotation with 90° flexion (IR), extension and external rotation (ER), respectively, when we used a 22-mm head diameter. Bony jumping angle increased about 0.5°, 0.8°, 1.0° and 0.7° per 2-mm increase in head diameter with flexion, IR, extension and ER. On the other hand, prosthetic jumping angle remained almost stable at about 31°. Impingement distance was related to pelvic morphology in all directions. Bony jumping angles differed with ROM; the biggest was seen with extension, followed by IR, ER and flexion. On the other hand, bony jumping angle was less than prosthetic jumping angle in all cases. CONCLUSION: Bony jumping angles differed with ROM; the biggest was seen with extension, followed by IR, ER and flexion. Prosthetic impingement angles were stable. In addition, the bony jumping angle was less than the prosthetic jumping angle in all cases.

Mid- to long-term results of resurfacing hip arthroplasty in Japanese patients: a comparison of osteoarthritic vs non-osteoarthritic patients.

Past reports showed good mid-term results of RHA for Japanese patients. However, few reports have compared the mid- to long-term results for RHA in Japanese patients with and without osteoarthritis. Therefore, this study investigated the mid- to long-term results of RHA in Japanese patients with osteoarthritis compared to those without. We conducted a retrospective review of a consecutive series of 92 hips in 80 patients (59 men and 21 women). The minimum follow-up period was 5 years. The JOA hip scoring system was used to clinically evaluate hip function. In the radiological assessment, stem-shaft angle, inclination of the acetabular component, postoperative complications, and adverse reactions around RHA were evaluated. The 10-year survival rate using the Kaplan-Meier method was investigated to compare patients with and without osteoarthritis. A significant difference was observed between the preoperative and postoperative JOA hip scores of either group. Also, the radiological assessment revealed no significant changes in either group. All three revision THAs were performed on patients in the only non-osteoarthritis group. In the osteoarthritis group, the 10-year survival rate was 94% (95% CI 81.8-100) in males and 100% (95% CI 100) for females; in the non-osteoarthritis group, the rate was 80% (95% CI 55.1-100) in males and 66.7% (95% CI 13.3-100) for females. In conclusion, this study showed good mid- to long-term clinical results for young Japanese osteoarthritis patients, with less satisfactory mid- to long-term results in patients without osteoarthritis.

The optimal combined anteversion pattern to achieve a favorable impingement-free angle in total hip arthroplasty.

BACKGROUND: There have been no studies on the differences in impingement-free angle that result from different combined anteversion (CA) patterns. The aim of this study was to find the optimal CA pattern for achieving a favorable impingement-free angle, including bony and prosthetic impingement, in total hip arthroplasty. METHODS: We evaluated 100 patients with no hip arthritis. We investigated the impingement-free angle (flexion, internal rotation with 90° flexion, extension, and external rotation) after changing the stem and cup anteversions to satisfy several CA patterns [cup anteversion + stem anteversion = 30°, 40°, 50°, and 60°; cup anteversion + 0.7 × stem anteversion = 37.3° (:Widmer's theory); and cup anteversion + 0.77 × stem anteversion = 43.3° (:Yoshimine's theory)] using 3-dimensional templating software. RESULTS: The impingement-free angle changed dramatically among the various CA patterns. The optimal CA was changed by various stem anteversion. Only CA: Widmer with stem anteversion of 20° satisfied daily-life range of motion (ROM) requirements (flexion ≥130°, internal rotation with 90° flexion ≥ 45°, extension ≥ 40°, external rotation ≥ 40°). CONCLUSION: Good impingement-free angle cannot be obtained with single fixed CA. Different CA patterns should be used, depending on the differences in the stem anteversion. A CA of 30° with 0° ≤ stem anteversion ≤10°; a CA:Widmer with 20° of stem anteversion; a CA of 40° or Widmer with 30° of stem anteversion. When stem anteversion is ≥40°, CA should be decided by each patient's state. Among them, a stem anteversion of 20° with cup anteversion of 23.3° was found to be the best CA pattern.

A proposed new rotating reference axis for the tibial component after proximal tibial resection in total knee arthroplasty.

PURPOSE: During total knee arthroplasty, few rotating reference axes can be reliably used after tibial resection. We speculated that a line that passes through the lateral edge of the posterior cruciate ligament (PCL) at its tibial attachment after resection and the most prominent point of the tibial tubercle [after-tibial resection (ATR) line] will provide a good reference axis. In this study, we aimed to evaluate the association between ATR and Akagi's lines. MATERIALS AND METHODS: In this case-control simulation study, we retrospectively evaluated 38 patients with varus knee and 28 patients with valgus knee. We defined the reference cutting plane as 10 mm distal from the lateral articular surface of the tibia in varus group and as 7 mm distal from the medial articular surface in the valgus group. We measured angles between Akagi's line and the ATR line (ATR line angle) as well as between Akagi's line and 1/3 Akagi's line (1/3 Akagi's line angle), which passes through the midpoint of PCL and the medial third of the patellar tendon. We used paired t-tests to determine the significance of differences between these angles, with p < 0.05 indicating statistical significance. Intra- and interclass correlation coefficients for the reproducibility of 1/3 Akagi's line angle and ATR line angle were analyzed by two surgeons. RESULTS: We found that 1/3 Akagi's line angle was 10.2° ± 1.3° in the varus group and 10.9° ± 1.3° in the valgus group (p = 0.017). The ATR line was positioned externally compared with Akagi's line in all patients. Mean ATR line angles at 0°, 3° and 7° posterior slopes were 6.1° ± 1.9°, 5.8° ± 2.0° and 6.0° ± 1.7° in the varus group and 6.3° ± 2.3°, 6.2° ± 2.3° and 5.4° ± 2.1° in the valgus group, respectively. There were no significant differences in the ATR line angle between the varus and valgus groups. (p = 0.34-0.67) Intra- and interclass correlation coefficients for the reproducibility of 1/3 Akagi's line angle were 0.936 and 0.986 and those for the reproducibility of ATR line angle were 0.811 and 0.839. CONCLUSIONS: The ATR line was positioned between Akagi's line and 1/3 Akagi's line in all patients and was a valid option for evaluating rotational tibial alignment after tibial resection.

The effect of flexion alignment in total hip arthroplasty with a cementless tapered-wedge femoral stem.

INTRODUCTION: The influence of stem sagittal alignment on clinical outcomes is unclear in total hip arthroplasty (THA). The purpose of this study is to assess the relationship between stem sagittal alignment and clinical and radiographic outcomes using 3D-CT. MATERIALS AND METHODS: We performed 370 consecutive primary THAs between 2009 and 2013. After exclusion, 102 hips in 89 patients using single tapered-wedge stem were included. Mean follow-up was 4.7 years. Stem sagittal alignment was measured using CT, and patients were divided into flexion and neutral alignment groups. Clinical and radiographic outcomes were compared between two groups. Furthermore, we evaluated the anterior femoral offset and initial contact state. RESULTS: There were no significant differences in clinical or radiographic outcomes between two groups. CT data analysis and multiple regression analysis showed flexion alignment increased anterior femoral offset (AFO) and Gruen zone 4 contact area. CONCLUSIONS: There was no significant difference in clinical or radiographic outcomes between flexion and neutral alignment of the tapered-wedge stem at an average of 4.7 years of follow-up. The increase of AFO and distal contact area in flexion alignment could affect the improvement of impingement-free range of flexion and intraoperative fracture.

Clinical Results of Total Hip Arthroplasty in Two Patients with Charcot Hip Joints due to Congenital Insensivity to Pain with Anhydrosis.

Traditionally, Charcot arthropathy has been considered an absolute contraindication for total hip arthroplasty (THA). However, some recent reports have shown that good short- to mid-term results can be achieved by improving the durability of the implant. This paper reports the mid- to long-term results of THA in two patients with Charcot hip joints caused by congenital insensivity to pain with anhydrosis. Both patients suffered multiple posterior dislocations in the six months immediately following surgery. However, with the continuous use of a hard abduction brace, one patient was eventually able to walk with a lofstrand cane and the other with the use of one crutch. Although one patient experienced a dislocation five years after surgery, X-rays taken after nine years and five years, respectively, revealed no clinical signs of implant loosening. We conclude that, with careful planning and appropriate precautions, THA may be a viable treatment option for Charcot hip joints caused by congenital insensivity to pain with anhydrosis.

Comparison with the osteoconductivity and bone-bonding ability of the iodine supported titanium, titanium with porous oxide layer and the titanium alloy in the rabbit model.

BACKGROUND: One of the serious postoperative complications associated with joint replacement is bacterial infection. In our recent investigations, iodine supported titanium implants demonstrated antibacterial activity in both in vitro and in vivo studies. The surfaces of the implants have porous anodic oxide layer with the antiseptic properties of iodine. According to the literature the titanium with porous anodic oxide have good osteoconductivity. But it is not clear whether the properties of iodine influence bone bonding of implants. OBJECTIVES: The aim of this study is to evaluate the influence of the properties of iodine and porous anodic oxide layer in the bone bonding ability of titanium implants. STUDY DESIGN & METHODS: Titanium rods were implanted in intramedullary rabbit femur models, in regard to the cementless hip stem. The implant rods were 5 mm in diameter and 25 mm in length. Three types of titanium rods were implanted.One was untreated titanium (control group (CL)), another was titanium with oxide layer without iodine (oxide layer group (OL)), and the other was Iodine treated Titanium (iodine group (ID)). The rods were inserted into the distal femur. We assessed the bonding strength by a measuring pull-out test at 4, 8, and 12 weeks after implantation. The bone-implant interfaces were evaluated at 4 weeks after implantation. RESULTS: Pull-out test results of the ID implants were 202, 355, and 344 N, and those of the OL implants were 220, 310, 329 N at 4, 8, and 12 weeks, significantly higher than those of the CL implants (102, 216, and 227 N). But there were no significant difference in ID implants and OL implants. Histological examination revealed that new bone formed on the surface of each types of implants, but significantly more bone made direct contact with the surfaces of the ID implants and OL implants. CONCLUSIONS: This research showed that new type of coating, iodine coated titanium has low toxicity and good osteoconductivity.

Three-dimensional limb lengthening after total knee arthroplasty in a simulation study.

OBJECTIVES: Limb lengthening after total knee arthroplasty (TKA) has been reported in some cases, all of which were evaluated using two-dimensional images. To our knowledge, no case has been evaluated using three-dimensional (3D) images. We investigated 3D limb lengthening after TKA. METHODS: We simulated 100 varus knees using 3D templating software. Virtual TKA was performed to maintain the original joint line by conducting a measured-resection technique. We examined the relationships of 3D distance between the femoral head center and ankle center before and after TKA, degree of hip-knee-ankle angle (HKA) improvement, and degree of flexion contracture angle improvement. RESULTS: All cases showed limb lengthening (average, 9.4 ± 6.0 mm). The coefficients of correlation with limb lengthening and the degree of HKA improvement and the degree of flexion contracture angle improvement were good (0.730 and 0.751, respectively). The correlation between the degree of total improvement (the degree of HKA improvement + the degree of flexion contracture angle improvement) and limb lengthening was strong (r = 0.896). CONCLUSION: The expected limb lengthening when performing measured-resection TKA is expressed as 0.58 × (the degree of HKA improvement + the degree of flexion contracture angle improvement) mm and is a useful index.

Usefulness of the "grand-piano sign" for determining femoral rotational alignment in total knee arthroplasty.

BACKGROUND: The "grand-piano sign" is a well-known indicator of proper rotational femoral alignment. We investigated changes in the shape of the femoral anterior cutting plane by changing the rotational alignment, anterior portion depth, and cutting plane flexion angle. METHODS: We simulated various cutting planes after cutting the anterior portion of the femur next to the distal femoral osteotomy in 50 patients with varus knee and also a femoral anterior osteotomy with four degree (S group) and seven degree (T group) flexion angles regarding the mechanical axis. We defined the final cutting plane as the farthest position that we could reach without making a notch and the precutting plane as two millimeters anterior from the final cutting plane. The simulated resection plane was rotated to produce external and internal rotation angles of 0°, three degrees, and five degrees relative to the surgical transepicondylar axis (SEA). We investigated medial and lateral portions of the femoral anterior cutting plane length ratio (M/L). RESULTS: When we cut parallel to SEA, M/L was 0.67±0.09 and 0.62±0.12 in the T and S groups, respectively. M/L was approximately 0.8 and 0.5 with five degree internal and external rotations, respectively (P<0.01). On comparing final cutting and precutting planes, there were no significant differences in M/L without five degree external rotation in the T group and no significant difference in any case in the S group (P>0.01). CONCLUSIONS: The ideal M/L of the femoral anterior cutting plane was 0.62-0.67. M/L did not change with a precutting plane in almost all rotational patterns.

Effectiveness and Safety of Needle Medial Collateral Ligament Pie-Crusting in Total Knee Arthroplasty: A Cadaveric Study.

Medial collateral ligament (MCL) pie-crusting technique in total knee arthroplasty (TKA) is one of the methods of medial release. The effects and risks of blade pie-crusting have been reported in previous studies. However, only a few have reported the safety and efficacy of needle pie-crusting. In this cadaveric study, we quantitatively evaluated the amount of gap change by MCL needle pie-crusting. We investigated five knees of four fresh human cadavers and performed posterior-stabilized TKA. Only deep MCL release as the medial release was conducted. We punctured the MCL from the deep layer to the superficial layer using a 18 G needle in a 90-degree flexion position for 0, 10, 20, 50, 75, and 100 times. Medial and lateral gaps were measured accurately with a balancer at determined times in 0 and 90-degree flexion positions. Changes in medial and lateral gaps were not significant differences in flexion and extension position. However, in 90-degree flexion, medial gap changes were tended to be larger than lateral gap changes. A 0.6 mm additional medial release and a 0.2 mm additional lateral release were found per 10 times pie crust in flexion position (100 times, p: 0.08). However, large differences existed among the cases. Needle pie-crusting is safer than blade pie-crusting because of the small efficacy of one-time pie crust. MCL needle pie-crusting showed varied effects for each case. This result indicates the risk of relaxation of an unexpected gap. Caution should be taken when choosing between needle pie-crusting and blade pie-crusting.

Differences in range of motion with the same combined anteversion after total hip arthroplasty.

PURPOSE: We investigated the various impingement angles (including both bony and prosthetic impingement) and impingement types that can occur after THA, even when the same combined anteversion parameter is used. We also investigated the relationship between impingement angle and acetabular morphology or femoral anteversion. METHODS: We evaluated 83 patients with no hip arthritis. We divided them into six groups according to acetabular CE angle (≤15°, >15-≤25°, and >25°) and femoral anteversion (≤20° and >20°). Using three-dimensional templating software, we changed stem and cup anteversion to satisfy a combined anteversion (CA) of 50° in each hip (stem anteversion + cup anteversion = 50°) and investigated the resulting impingement angles. RESULTS: Even with the same CA, differences in impingement angle occurred: 18.3° ± 7.2° with flexion, 30.2° ± 9.7° with internal rotation at 90° flexion, 20.2° ± 12.5° with extension, and 26.2° ± 7.8° with external rotation. As stem anteversion increased, the impingement type changed from prosthetic impingement to bony impingement in flexion and internal rotation and from bony impingement to prosthetic impingement in extension and external rotation. The flexion angle and internal rotation angle at 90° flexion increased (p < 0.016) as CE angle decreased. There were no significant differences between high and low femoral anteversion. CONCLUSIONS: Combined anteversion theory should be used with care because of large differences in impingement angles. A stem anteversion of 30° and cup anteversion of 20° appear to be ideal for obtaining a larger impingement angle under this condition.

The accuracy of the "projected surgical transepicondylar axis" relative to the "true surgical transepicondylar axis" in total knee arthroplasty.

BACKGROUND: In TKA, we have used the "projected SEA", which is obtained by projecting the "true SEA" on the distal femoral cutting plane in clinical practice to determine the femoral component rotation. There are no reports examining the accuracy of the "projected SEA". In this study, we investigated the difference between the "true SEA" and "projected SEA". METHODS: The present study was a CT-based computer-simulated case series. We evaluated 34 knees without osteoarthritis changes. These patients were selected from the operative schedule prior to THA. We defined the "true SEA" on the 3D model and the "projected SEA" on the cutting plane parallel to the distal femoral axis obtained based on the "true SEA". We changed the cutting angles from 20° flexion to 20° extension, and from five degrees varus to five degrees valgus. We measured the "true SEA angle" and "projected SEA angle" regarding the posterior condylar axis (PCA). RESULTS: The mean "true SEA angle" was 3.04°±1.34° (0.6-5.0°). The mean "projected SEA angle" was 3.43°±1.58° at 20° flexion, 3.42°±1.56° at 0° flexion, 3.43°±1.52° at 20° extension, 3.39°±1.59° at five degrees valgus, and 3.39°±1.50° at five degrees varus. At each cutting angle, the "projected SEA angle" was significantly larger than the "true SEA angle" (p<0.001). There was no significant difference between any of the "projected SEA angles" (p>0.001). CONCLUSIONS: We found that the true SEA and projected SEA do not differ significantly (0.39°±0.29° [range 0-1.0°]).