Comparison of postoperative clinical outcomes and knee stability of cruciate-retaining total knee arthroplasty using the tibia-first gap navigation technique with a computer-aided system and measured-resection technique: A retrospective analysis of a propensity-matched cohort.

Purpose: This study aimed to clarify whether the range of motion (ROM), anterior and posterior (AP) stability and other clinical measures changed in patients who underwent tibia-first total knee arthroplasty (TF-TKA) using navigation with a computer-aided system after surgery. Methods: This is a retrospective study and we conducted a matched cohort analysis of 60 measured resection (MR)-TKAs and 52 TF-TKAs performed by a single surgeon. All the surgeries used the same implant and approach. Baseline differences between the groups were adjusted using propensity score matching. We compared each patient's measured ROM and Oxford Knee Score (OKS) and performed knee AP laxity measurements by using a device during routine follow-ups. Results: A total of 40 MR-TKAs with a mean age of 73.5 ± 5.6 years and sex (male 10, female 30) were compared to 40 TF-TKAs with a mean age of 74.0 ± 5.7 years and sex (male 13, female 27) at 2-year follow-ups. Two years postoperatively, there was a significant difference in the AP laxity at 30° of knee flexion between both groups (7.0 ± 3.4 mm vs. 5.2 ± 2.3 mm, p < 0.01). In contrast, no differences were found between both groups for knee flexion (120.8 ± 9° vs. 116.7 ± 9.8°, p = 0.07) and OKS score (41.8 ± 6.9 vs. 41.0 ± 5.9, p = 0.61). Conclusion: The AP stability in the midflexion obtained using the tibia-first technique remained consistent even after 2 years. However, OKS and ROM were not significantly different from those of the MR-TKA group. Level of Evidence: Retrospective comparative LEVEL III study.

Effect of plate design on maintenance of anterior and posterior gaps and posterior tibial slope after cyclic loading in medial open-wedge high tibial osteotomy: A biomechanical study using porcine's tibia.

Purpose: We aimed to investigate whether a plate adapted to the anatomy of the proximal medial porcine's tibia would provide maintenance of the anterior gap (AG), posterior gap (PG) and posterior tibial slope (PTS). Methods: Twenty-seven porcine tibias were biomechanically evaluated by performing MOWHTO and placing TOMOFIX (n = 9), AC plate (n = 9) and TriS (n = 9) anteromedially. Cyclic testing (800 N, 2000 cycles, 0.5 Hz) was performed to investigate the PTS over time for MOWHTO. The particular displacement calculated from the maximum to the minimum point with the load-displacement curve along the mechanical axis during cyclic testing, the final AG and PG changes at the osteotomy site, the increased PTS calculated by subtracting AG from PG after 2000 cycles were compared among the three groups. The displacement was evaluated by repeated-measures analysis of variance (ANOVA), and changes in AG and PG and increased PTS were evaluated by one-way ANOVA. The sample size for α and ß errors were <0.05 and <0.20, and the effect size was 0.64 for one-way ANOVA and 0.49 for repeated-measures ANOVA. Results: There were no significant differences in displacement among the groups. A significant difference was observed in the AG (p = 0.044) and PG (p = 0.0085) changes. There were no significant differences in increased PTS among the groups. Conclusion: When anteromedially placed, the AC plate and TriS resulted in significant maintenance of AG and PG compared with that of TOMOFIX in MOWHTO after cyclic loading. Level of Evidence: Level Ⅳ.

Postoperative improvement in patient-reported outcomes after neutral alignment medial open wedge high tibial osteotomy for medial compartment knee osteoarthritis in patients aged ≥70 years versus younger patients.

Purpose: To compare the postoperative clinical and radiological outcomes in patients aged ≥70 years following neutral alignment medial opening-wedge high tibial osteotomy (NA-MOWHTO) for medial compartment knee osteoarthritis (KOA) to those observed in younger patients. Methods: The data of patients who underwent NA-MOWHTO for medial compartment KOA between September 2018 and June 2022 were retrospectively analysed. The patients were categorised into groups Y (<70 years) and O (≥70 years). Age, sex, Kellgren-Lawrence classification, pre- and postoperative mechanical axis, weight-bearing line ratio, medial proximal tibial angle, preoperative Tegner Activity Score and pre- and postoperative Lysholm scores were compared between the groups. Results: Overall, 81 patients (60 and 21 in groups Y and O, respectively) who underwent NA-MOWHTO were included in this study. No significant differences were found in patient characteristics between the two groups, except for the preoperative Tegner Activity Score, which was significantly higher in group Y than in group O (3 [2-4] vs. 2 [2-2], respectively; p = 0.011). The two groups exhibited no significant differences in pre- and postoperative knee alignments. Postoperatively, Lysholm scores improved significantly in both groups without significant differences. Additionally, no correlation was found between age and pre- and postoperative Lysholm scores. Conclusions: The postoperative improvement following NA-MOWHTO for medial compartment KOA is comparable in patients aged ≥70 and younger. Level of Evidence: Level III, Retrospective comparative study.

Biomechanical Comparison of Short-, Mid-, and Long-Length Proximal Femoral Nails for Femoral Intertrochanteric Fracture (AO/OTA 31A3.3) Fixation.

Introduction: In surgeries for unstable AO/OTA 31A3.3 fractures, surgeons use various lengths of intramedullary nails (IMNs). However, there is insufficient evidence regarding the appropriate nail length for these fractures. This study compared the biomechanical properties of IMNs of different lengths for AO/OTA 31A3.3 fractures. Methods: 30 synthetic femora of AO/OTA 31A3.3 fracture model were randomly assigned to the following three groups: short- (170 mm), mid- (235 mm), and long-length (300 mm) nail groups, and were performed fixation surgery. The translation patterns of the constructs were examined by cyclic testing and compared among three groups. Additionally, changes in the neck-shaft and shaft-nail angles after cyclic testing were evaluated using radiological images. Results: The translation patterns during cyclic loading did not differ among the groups. Conversely, one-way analysis of variance (ANOVA) revealed a significant difference in the neck-shaft angle change (5.8° ± 1.8°, 2.8° ± 1.3°, and 1.9° ± .9° in the short-, mid-, and long-length groups, respectively; P < .001), and post-hoc analysis revealed that the change was greater in the short-length group than in the mid- and long-length groups (P < .001 and P < .001, respectively). Furthermore, one-way ANOVA revealed a significant difference in the shaft-nail angle change (3.1° ± 2.1°, 1.4° ± 1.4°, and .1° ± .6° in the short-, mid-, and long-length groups, respectively; P < .001), and post-hoc analysis revealed that the change was greater in the short-length group than in the mid- and long-length groups (P = .044 and P < .001, respectively). Conclusions: Short-length nails were associated with relevant changes in the neck-shaft and shaft-nail angles in our AO/OTA 31A3.3 fracture model. Thus, the selection of mid- or long-length nails instead of short-length nails might be better in IMN surgery for these fractures to prevent postoperative varus deformity.

Patient height is a predictive factor for good postoperative knee flexion after cruciate-retaining total knee arthroplasty with GRADIUS design.

BACKGROUND: A gradually reducing radius (GRADIUS) design implant can facilitate a smooth transition from stability through full range of motion in total knee arthroplasty (TKA). Nonetheless, patient-specific factors associated with good knee flexion remain unclear. OBJECTIVE: This study aimed to determine the factors associated with good knee flexion after cruciate-retaining TKA with a GRADIUS prosthesis in an Asian population. METHODS: This retrospective study included 135 patients that were stratified according to postoperative knee flexion angle (KFA) into Group F (⩾ 120∘; 85 patients [63.2%]) and Group NF (< 120∘; 50 patients [36.8%]). RESULTS: Patients in Group F were taller and had a lower body mass index (BMI) smaller preoperative hipkneeankle angle and better preoperative extension and flexion angle than Group NF patients. The multivariable analysis revealed that patients' height (odds ratio [OR]: 1.07, P= 0.0150), BMI (OR: 0.85, P= 0.0049), and preoperative flexion angle (OR: 1.06, P= 0.0008) predicted good KFA. The ROC curve analysis showed that the cutoff values of a good KFA were height 155.1 cm, BMI 22.1 kg/m2, and preoperative KFA 120∘. CONCLUSIONS: Patient height, BMI, and preoperative KFA were independent factors affecting good postoperative KFA in patients of Asian descent who underwent cruciate-retaining TKA with a GRADIUS design.

Biomechanical comparisons of plate placement for medial tibial plateau fractures (Schatzker type IV): A biomechanical study using porcine tibias.

INTRODUCTION: Biomechanical studies on medial tibial plateau fractures (MTPFs) (Schatzker classification type IV) are currently few, while studies using locking plates (LPs) placed on medial proximal tibias are unavailable. Hence, we compared the biomechanical properties of plate osteosynthesis at the medial and anteromedial placements using large- and small-fragment LPs in porcine bones. MATERIALS AND METHODS: MTPFs were internally fixed using LPs on 40 porcine tibias. Specimens were equally divided into four groups: medial placement using a large-fragment LP (LPs for the medial (LM) group), anteromedial placement using a large-fragment LP (LAM group), medial placement using a small-fragment LP (SM group), and anteromedial placement using a small-fragment LP (SAM group). The translation patterns of the constructs in each group were examined by cycling loading test (displacement and translation along the mechanical axis at 10-100, 100-500, 500-1000, 1000-1500, and 1500-2000 cycles). Then, articular gaps and step-off changes after 2000 cycles were compared among the four groups. RESULTS: One-way analysis of variance (ANOVA) revealed no significant differences in displacement and translation during cyclic loading. One-way ANOVA followed by post hoc analysis revealed that the anterior gap was lower in LPs for the medial (LM) than in SM (P = 0.029) and SAM (P = 0.0026). The central gap was also lower in LM than in SM (P = 0.042) and SAM (P < 0.001), and it was lower in LAM than in SAM (P = 0.047). Likewise, the posterior gap was lower in LM than in LAM (P = 0.025) and SAM (P < 0.001). Furthermore, the central step-off of SAM was higher than that of LM, LAM, and SM (P < 0.001, P = 0.0014, and P = 0.0077, respectively). The posterior step-off was lower in LM than in SAM and LAM (P = 0.037 and P < 0.001), and it was also lower in SM than in SAM (P = 0.0082). CONCLUSION: Medial LP placement for MTPFs in porcine bones resulted in significantly lower posterior step-offs after cyclic loading than anteromedial placement, and large-fragment LPs for MTPFs caused significantly lower fracture gaps in the central articular after cyclic loading than small-fragment LPs.

Flexion contracture can cause component mismatch in the Prophecy® preoperative patient-specific instrumentation for Evolution® medial-pivot knee system.

INTRODUCTION: Patient-specific instrumentation (PSI) systems are used to conduct total knee arthroplasty. PSI reduces operative time, is less invasive and easier to use, and minimizes the risk of errors by providing precise measurements and reducing operating room turnover time. However, a study on the accuracy of Prophecy Evolution PSI (Microport Inc., Arlington, TN, USA) reported that 94% were below the error margin of 1.5 mm and 90% had error margins of 1 mm. This study aimed to evaluate the accuracy of the Prophecy Evolution PSI system in terms of the thickness of "total" bony resection required to achieve adequate extension/flexion gaps and the component match ratio between preoperative planning and actual component size inserted. METHODS: Comparisons were made between the sizes of femoral and tibial components planned with PSI and those inserted. The primary outcome was the average preoperative range of motion with and without matched femoral/tibial components. The study further analyzed the proportions of cases in which both the femoral and tibial components matched, neither matched, and only one of the femoral or tibial components matched. RESULTS: The ratio of the same sizes between the PSI planning and those inserted was 50.8% (33 patients) for both the femoral and tibial components. For the femoral component alone, the ratio was 84.6% (55 patients), and for the tibial component, it was 58.4% (38 patients). A receiver-operating characteristic curve analysis indicated that flexion contracture greater than 20° was a significant prognostic factor for the PSI component match group versus the mismatch group. DISCUSSION: Flexion contracture may cause PSI mismatch. Notably, flexion contracture greater than 20° was a significant risk factor for the PSI component match group versus the mismatch group. During preoperative planning for a patient with flexion contracture, surgeons should prepare for the possibility of inserting an undersized tibial component.

Comparison of postoperative clinical outcome in medial-pivotal and gradually reducing radius design cruciate-retaining total knee arthroplasty-A multicenter analysis of propensity-matched cohorts.

Purpose: To clarify differences in surgery duration, postoperative knee range of motion (ROM), anterior and posterior (AP) laxity, and Forgotten Joint Score (FJS) in patients undergoing medial-pivot (MP) and GRADIUS cruciate-retaining (CR) total knee arthroplasty (TKA) surgeries. Methods: We examined patients who underwent either MP or CR TKA at six different Japanese centres. Patients were propensity score matched for age, sex, and preoperative hip-knee angle (HKA). We compared the groups' average surgery duration, postoperative knee ROM, AP laxity, and FJS 1 year after surgery. Results: There were 86 study patients: 43 MP and 43 CR TKA matched for age, sex, and preoperative HKA. The MP group enjoyed a significantly shorter surgery duration (89.1 ± 10.9 mins vs. 95.7 ± 12.0 mins, p = 0.0091) and significantly better postoperative knee flexion than the CR group (123.7 ± 9.1° vs. 115.3 ± 12.4°, p < 0.001). The MP had significantly smaller postoperative AP laxity with 30° of knee flexion than the CR group (3.4 ± 1.3 vs. 5.6 ± 2.2 mm, p < 0.001). Conversely, postoperative AP laxity with 90° of knee flexion was significantly larger for the MP group (3.6 ± 1.3 vs. 2.7 ± 1.9 mm, p = 0.0098). There were no between-group differences in postoperative FJS. Conclusions: The MP group showed better postoperative knee flexion, midrange AP knee stability, and shorter surgery duration. Level of Evidence: Level III, retrospective comparative study.

Relationship Between Intraoperative Macroscopic Anterior Cruciate Ligament Findings, Perioperative Surgical Findings, and Postoperative Clinical Outcome After Cruciate-Retaining Total Knee Arthroplasty.

PURPOSE: To assess how intraoperative macroscopical anterior cruciate ligament (ACL) findings affect perioperative procedures, biomarkers, and postoperative anterior-posterior (AP) laxity and range of motion (ROM) after cruciate-retaining (CR) total knee arthroplasty (TKA) and to determine how chronic ACL deficiency may affect postoperative inflammatory biomarker, AP laxity, and ROM. METHODS: A total of 121 patients with varus knee osteoarthritis without a history of ACL injury who underwent ATTUNE® (DePuy Synthes, Warsaw, IN) CR TKA were analyzed. Intraoperative ACL findings were stratified into intact, damaged, and diminished, according to the tension by probing, synovial coverage, and vascularity. C-reactive protein (CRP) levels were examined at one, seven, and 14 days after surgery. Knee AP laxity measurements using Kneelax 3 (Monitored Rehab Systems, Haarlem, The Netherlands) and postoperative knee ROM were also compared. RESULTS: One-way ANOVA showed significant differences in CRP levels examined one day after surgery observed between the three groups (8.4 (3.8), 9.8 (4.3), and 13.2 (7.7) mg/dL, respectively; P = 0.018), with post hoc analysis showing that CRP levels one day after surgery were significantly greater in the diminished group than in the intact and damaged groups (P = 0.012 and 0.023, respectively). AP laxity in 30° of knee flexion was observed between the three groups (5.4 (2.3), 5.8 (2.5), and 7.1 (2.8) mm, respectively; P = 0.039), with post hoc analysis showing that AP laxity in 30° of knee flexion was significantly greater in the diminished group than in the intact group (P = 0.038). Knee ROM showed no significant differences. CONCLUSION: Intraoperative ACL diminishment was associated with higher CRP one day after surgery and midrange AP laxity one year after surgery.

Plate Hooking Transtibial Medial Meniscus Posterior Root Pull-Out Repair with Medial Open-Wedge High Tibial Osteotomy for Knee Osteoarthritis with Medial Meniscus Posterior Root Tear.

Medial meniscus posterior root tears (MMPRT) are a risk factor for knee osteoarthritis (KOA) because it involves disruption of the hoop structure of the meniscus. In recent years, MMPRT pullout repair has been performed to restore the native anatomy of the meniscus attachment. In addition, medial open-wedge high tibial osteotomy (MOWHTO) has been performed with MMPRT pullout repair to reduce the pressure on the medial compartment. However, it has been noted that when MMPRT pullout repair and HTO are performed simultaneously in a patient, the locking screws of the plate interfere with the tibial bone tunnel, which damages the suture. In this technical note, we developed a method to reduce the probability of interference by placing the plate further anteroinferior when digging the bone tunnel from the PM position. This technical note aimed to provide a comprehensive description of the safety of transtibial MMPRT repair with MOWHTO for medial KOA with MMPRT.

Relationship Between Achilles Tendon Stiffness Using Myoton PRO and Translation Using a Tensile Testing Machine: A Biomechanical Study of a Porcine Model.

Background Achilles tendinopathy is a common ankle disorder in both the general population and athletes. This condition can alter the mechanical characteristics of the Achilles tendon (AT) by decreasing tendon stiffness. Achilles tendinopathy is primarily treated conservatively; however, few monitoring tools exist for evaluating the condition of the AT. The Myoton PRO (Myoton AS, Tallinn, Estonia) device is a handheld tool used to evaluate tissue stiffness. However, no basic studies have examined the validity of Myoton PRO for assessing the AT. This study aimed to assess the validity of Myoton PRO using animal ATs and to examine its clinical applicability. Methods We used 28 fresh porcine ankles and evaluated AT stiffness at the calcaneus insertion site (AT0) and 2.0 cm above the calcaneus (AT2) using Myoton PRO. We also measured changes in the AT length using a tensile testing machine during the cyclic loading test. We investigated the correlation between dynamic stiffness and length change. Furthermore, we assessed the difference in stiffness between AT0 and AT2. Results The dynamic stiffness was 717.6 ± 183.1 N/m at AT0 and 467.4 ± 152.3 N/m at AT2. The change in length during the cyclic loading test was 1.8 ± 0.7 mm. The correlation between dynamic stiffness and length change was as follows: AT0, r=-0.61; AT2, r=-0.64 (P<0.001). The dynamic stiffness at AT0 was significantly greater than that at AT2 (P<0.001). Conclusions AT assessment using Myoton PRO has potential clinical utility as an indicator of tissue stiffness.

Association between intraoperative findings and postoperative knee range motion after cruciate-retaining total knee arthroplasty.

BACKGROUND: Total knee arthroplasty (TKA) alleviates pain and improves daily living activities in individuals with end-stage osteoarthritis of the knee. However, up to 20% of patients have sub-optimal outcomes after TKA. OBJECTIVE: No studies have clarified the intraoperative factors that affect postoperative range of motion (ROM) after cruciate-retaining (CR) TKA. Thus, this study aims to clarify these factors. METHODS: Patients with knee osteoarthritis with varus knee deformity who underwent CR-TKA between May 2019 and December 2020 were included in this study. One year after surgery, patients were stratified into two groups based on knee flexion: Group F (over 120∘) and Group NF (below 120∘). Patient backgrounds including age, body mass index, hip knee angle, preoperative range of motion for both extension and flexion, intraoperative center joint-gap measurements of 0∘, 30∘, 45∘, 60∘, 90∘, and 120∘ of knee flexion using a tensor, intraoperative anterior-posterior (AP) laxity measurements of 30∘ and 90∘ of knee flexion using an instrumental laximeter were compared between the groups. Univariate analyses between the groups were used to construct the initial model. The receiver operating characteristic curve was also analyzed. The predictive variables included in the final model were selected by stepwise backward elimination. RESULTS: Intraoperative AP laxity with 30∘ of knee flexion smaller than 10.8 mm was a significant positive prognostic factor (OR: 1.39, 95% CI: 1.08-1.79, P= 0.011) of postoperative ROM over 120∘ of knee flexion one year after surgery. The sensitivity, specificity, PPV, and NPV were 70.9%, 82.4%, 92.9%, and 46.7%, respectively. CONCLUSION: Intraoperative AP laxity smaller than 10.8 mm was a significant positive predictive factor for obtaining knee flexion greater than 120∘ one year after surgery when using CR-TKA and its PPV was high up to 92.9%.

Epidemiology of fragility fracture of the pelvic ring: a regional population-based study in Northern Japan.

Using a regional population-based dataset in Japan, we identified the epidemiological characteristics of patients with fragility fractures of the pelvic ring. The incidence rate was 35.5-121.2 per 100,000 population/year. Age-specific incidence increased after 75 years. This fracture is associated with worse prognosis in terms of walking function and life expectancy. PURPOSE: Fragility fracture of the pelvic ring (FFP) is common among older patients; however, little information is available on the epidemiology of FFP worldwide. We aimed to identify the epidemiological characteristics of patients with FFP using a regional population-based dataset in Japan. METHODS: This descriptive epidemiologic study analyzed data obtained from clinical information of patients diagnosed with FFP from January 1, 2011 through December 31, 2020 at a regional dominant hospital in Japan. We calculated the crude and age-adjusted annual incidences and the age-specific incidence and described epidemiological date, injury characteristics, walking ability before and after FFP, and mortality. Additionally, we investigated factors associated with walking ability. RESULTS: We identified 66 FFP patients, of whom 55 (83.3%) were female, with a mean age of 82.2 years. The crude annual incidence of FFP ranged from 35.5-121.2 per 100,000 population/year during the study period. The age-specific incidence of FFP increased after 75 and 80 years in females and males, respectively. In total, 44.4% of patients had declines in walking ability 1 year after their FFP injuries. Patients with declining walking ability were significantly older (p < 0.01), and age ≥ 80 years was significantly associated with the decline in walking ability (p < 0.01). The 1- and 5-year mortality rates were 15.4% and 39.9%, respectively. CONCLUSION: The incidence rate of FFP was 35.5-121.2 per 100,000 population/year. Age-specific incidence of FFP increased after 75 years. Our results indicate that FFP is associated with worse prognosis of walking function and life expectancy.

Morphological and histological evaluation of the tendon-bone junction in porcine shoulders to create a rotator cuff tear and repair model.

BACKGROUND: This study aimed to morphologically and histologically examine whether pig is useful as models for rotator cuff tear (RCT). METHODS: The morphology of the scapula and humerus bones was evaluated by taking X-ray and three-dimensional computed tomography (3D CT) scans of the right shoulders of five female pigs (age: 4 months). The rotator cuff (RC) footprint at the humeral insertion of these was observed and its shape was measured. Next, they underwent general anesthesia and an acute rotator cuff tear/rotator cuff repair (RCT/RCR) model was created using a deltoid split approach. Four weeks after surgery, the animals were euthanized, the shoulder joints were harvested, and the repaired RC was evaluated by hematoxylin and eosin staining and toluidine blue staining. RESULTS: The scapula of the pig had a vestigial acromion, in contrast to that in humans. The supraspinatus and infraspinatus tendons were connected so as to overlap each other and attached to the postero-superior part of the greater tuberosity. These tendons were located extra-articularly, separate from the joint capsule. The average antero-posterior length of the foot print was 17.4 ± 0.7 mm on the medial margin and 19.1 ± 2.2 mm on the lateral margin. The maximum medial-to-lateral width of it was 5.1 ± 0.5 mm. In all RCT/RCR models at 4 weeks after surgery, the repaired RC compound tendon was visually confirmed to be continuous with the footprint. Histologically, it was confirmed that regeneration of the four-layer structure of the bone-tendon junction had occurred. CONCLUSION: Porcine supraspinatus and infraspinatus attachment to the greater tuberosity have a structure similar to that of sheep and dogs, which is advantageous for creating the RCT/RCR model. It might be used for future in vivo studies of shoulder joint diseases. THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE: Pigs could potentially serve as a viable model for rotator cuff tears.

Use of a preoperative 3D templating and proximal lateral tibial fitting patient-specific instrumentation in fixed valgus complex primary total knee arthroplasty for a patient with retaining hardware for internal fixation to treat Schatzker type V tibial plateau fracture: A case report.

A 72-year-old female patient with a fixed valgus knee deformity due to a Schatzker type V tibial plateau fracture treated with bilateral locking plates 8 years ago was admitted to our clinic with complaints of chronic pain and knee instability when walking. Radiographs revealed Kellgren-Lawrence Classification grade 4 knee osteoarthritis and 20.5° of valgus knee deformity. She was treated with three-dimensional templating and proximal lateral tibial fitting patient-specific instrumentation-assisted mechanically aligned posterior sacrificing total knee arthroplasty with minimal removal of the retained hardware for the internal fixation of the tibial plateau fracture via a lateral approach, resulting in a favorable clinical outcome. The use of proximal lateral tibial fitting patient-specific instrumentation in fixed valgus complex primary total knee arthroplasty for patients with retaining hardware for internal fixation to treat tibial plateau fractures is considered a treatment option to decrease surgical invasion.

Comparison of Electrothermal Ablation and Electrolyte Plasmalization Devices Based on the Mechanical Properties of Anterior Cruciate Ligament Femoral Attachment Following Partial Debridement: A Biomechanical Study Using a Porcine Model.

Purpose This study aimed to clarify whether differences in ablation devices used in the knee joint during partial debridement of the proximal end of the femoral attachment of the anterior cruciate ligament (ACL) affect the mechanical properties of the femur-ACL-tibia complex. Methods Electrothermal ablation was generated from Vulcan for the left knees, and radiofrequency ablation was generated from Werewolf Flow 50 Wand for the right knees. The probes were set to the default setting of 120 W and 150 W for Vulcan and Werewolf Flow 50 Wand, respectively. To mimic partial debridement in remnant tissue-preserving (RTP) ACL reconstruction, the bipolar ablation mode and serpentine movements were employed while in contact with the femoral fan-like extension fibers of the ACL. To simulate the arthroscopic environment, the model was immersed in a saline solution. The probes were applied for 60 s, and their biomechanical properties were evaluated. Results A significant difference was observed in the upper yield load between the two groups (Vulcan group, 107.1 ± 93.4 N; Werewolf group, 177.9 ± 108.8 N; P = 0.045). However, no significant differences were noted in linear stiffness (Vulcan group, 47.6 ± 30.9 N/mm; Werewolf group, 50.1 ± 30.5 N/mm; P = 0.85), maximum load (Vulcan group, 276.2 ± 171.8 N; Werewolf group, 397.7 ± 150.8 N; P = 0.26), or elongation at failure (Vulcan group, 6.1 ± 0.9 mm; Werewolf group, 11.6 ± 10.4 mm; P = 0.20) between the two groups. Conclusion The mechanical properties of the ACL after partial ACL femoral attachment debridement for RTP-ACL reconstruction were better when an electrolyte plasmalization device was used. When performing RTP-ACL reconstruction, surgeons must consider that the device used for partial femoral ACL stump debridement may affect the mechanical properties of the ACL remnant tissue. Clinical relevance When performing RTP-ACL reconstruction, surgeons must consider that the device used for partial femoral ACL stump debridement may affect the mechanical properties of the ACL remnant tissue.

Artifact Reduction Proton Density Magnetic Resonance Imaging Can Better Visualize Unicompartmental Knee Arthroplasty Components but Does Not Improve Measurement Accuracy at 3T: An In Vitro Phantom Study.

Background There are no studies of the efficacy of slice encoding for metal artifact correction (SEMAC) magnetic resonance imaging (MRI) at 3T for patients following unicompartmental knee arthroplasty (UKA), although the artifact is expected to increase compared with 1.5T. Purpose To clarify whether SEMAC MRI can better visualize UKA components and improve measurement accuracy at 3T MRI. Materials and methods The phantom consisted of femoral and tibial standard UKA components embedded in agarose gel. The MR images were scanned on a 3T MR system including proton density (PD) MR images. Six orthopedic surgeons blinded to the size and details of the components independently scored the diagnostic value for measurement and measured the lengths of the femoral posterior condyle, femoral peg, anterior-posterior (AP) tibial component, medial-lateral (ML) tibial component, and tibial keel, with and without SEMAC. Visualization scores were stratified as 0 = definitely nondiagnostic, 1 = probably nondiagnostic, 2 = possibly diagnostic, 3 = probably diagnostic, and 4 = definitely diagnostic. In addition, the differences between actual length and 95% confidence intervals of five measurement points were analyzed. Results The diagnostic values of the posterior condyle (2.0; 1.5 vs. 0; 0) and femoral peg (1.5; 1.0 vs. 0; 0) were significantly better in SEMAC-PD MRI than in non-SEMAC-PD MRI (P<0.05). On the other hand, there were no significant differences in the visualizations of AP, ML, and keel of the tibial components. Measurements of the femoral posterior condyle and tibial keel approached the actual length, but were not involved within the 95% confidence interval (actual length, 19.4 mm vs. 95% CI, 15.7-19.1 mm). Conclusion A significant reduction of metal artifacts was observed only around the femoral component in SEMAC-PD MRI. Despite artifact reduction, this sequence did not result in better visualization for measurement.

Effectiveness and Adherence Rate of S-flurbiprofen Plaster for the Pain Management of Patients With Moderate and End-Stage Knee Osteoarthritis.

BACKGROUND: S-flurbiprofen plaster (SFPP) is highly skin permeable and represents a new conservative treatment for knee osteoarthritis (KOA) that can attain considerably higher concentrations in the synovium than topical flurbiprofen. To date, no study has investigated the efficacy and adherence rate of SFPP in patients with end-stage KOA. This study aimed to compare the effectiveness and adherence rate of SFPP for pain management in patients with moderate and end-stage KOA. METHODS: This retrospective study included a total of 118 patients with KOA (Kellgren-Lawrence classification grades II (n = 29), III (n = 32), and IV (n = 57)). The difference in SFPP use rate, adverse drug reactions rate, whether 50% pain relief occurred, and the percentage of patients who underwent surgical treatment were calculated. RESULTS: The overall SFPP use rate at one year was 61.0% (88.1% at less than one month, 79.7% at three months, and 61.0% at six months), with no significant differences among Kellgren-Lawrence grade II, III, and IV groups (p = 0.538). Adverse drug reactions such as skin rash (n = 23), skin irritation (n = 8), and gastrointestinal disorders (n = 2) were observed. The one-year SFPP use rate was significantly lower in patients in whom these side effects occurred but did not decrease in patients in whom only a skin rash occurred. Overall, 19 patients underwent surgery after discontinuation of SFPP use. Surgery was statistically selected more by the "over 71 years of age" group (p = 0.038) and the "ineffective" group (p = 0.007). CONCLUSION: SFPP exerts a comparable therapeutic effect even in end-stage KOA and may be an effective treatment option. Even if patients have end-stage KOA, there are cases in which the patient's background does not allow for surgery positively, such as high perioperative risk or desire for conservative treatment. In such cases, SFPP may be an effective treatment option worth trying.

Effect of plate position on tibial displacement and posterior tibial slope after cyclic loading in medial open wedge high tibial osteotomy: A biomechanical study using porcine tibia.

BACKGROUND: Medial open wedge high tibial osteotomy is currently the most common osteotomy, but its complication is an increased posterior tibial slope over time. However, no study has clarified whether the plate position of medial open wedge high tibial osteotomy could reduce the increase in posterior tibial slope after cyclic loading. METHODS: Fourteen porcine bones were biomechanically evaluated by performing medial open wedge high tibial osteotomy and placing TOMOFIX medially and anteromedially. Cyclic testing was performed to investigate the posterior tibial slope over time for medial open wedge high tibial osteotomy with medial or anteromedial plate. The displacement along the mechanical axis during cyclic testing from 10 to 100th, 100-500th, 500-1000th, 1000-1500th, and 1500-2000th cycles, and changes in anterior and posterior gaps after 2000 cycles were compared between plate position. FINDINGS: There were no significant differences in displacement. A significant difference was found in posterior gap changes (-0.20 ± 0.84 mm in group of using medial plate, 1.07 ± 0.82 mm in group of using anteromedial plate) (P = 0.014), but none was found in anterior gap changes. INTERPRETATION: Medial plate placement in medial open wedge high tibial osteotomy resulted in significantly less increased posterior tibial slope than anteromedial plate placement after cyclic loading.