RESUMO
In this paper, we describe a method for detecting and correcting in-plane bulk translational motion in multislice spin-echo imaging using self-calibration and postprocessing. A constant phase encoding offset between slices is used to evenly spread out the low spatial frequency echoes to allow accurate motion detection by self-calibration. Motion detection in both x and y directions is achieved by interchanging the readout and phase encoding directions for the alternate slices. Displacements are determined by cross correlating the modulus of each 1D transformed echo with a reference box car function whose width equals that of the imaged object. In addition, phase errors induced by the velocity in the readout direction are estimated and corrected using the displacement data. The results obtained from knee studies at 0.5 T and 1.5 T show that the artifacts due to translational motions are significantly suppressed upon correction. The method does not require any additional pulses or time, and the data processing can be easily implemented.
Assuntos
Artefatos , Aumento da Imagem/métodos , Imageamento por Ressonância Magnética/métodos , Algoritmos , Calibragem , Análise de Fourier , Humanos , Joelho/anatomia & histologia , Modelos Teóricos , Movimento (Física) , Processamento de Sinais Assistido por Computador , Fatores de TempoRESUMO
We present an imaging technique that affords direct and noninvasive visualization of brain surface structure. This technique utilizes the signal before the rf pulse in steady-state free precession. This signal highly reflects the spin-spin relaxation time T2 as was studied in our laboratory (Matsui et al. J. Magn. Reson. 62, 12, 1985). Therefore the cerebrospinal fluid (CSF), having a long T2, is depicted as high intensity. The CSF permeates cerebral sulci and fissures. The imaging time with this technique is less than 1 min.