Comparative evaluation of square and rectangular slot three-point play behavior.

The play between bracket slots and archwires affects tooth movement and the transmission of orthodontic force by multi-bracket appliances. We assessed play by quantifying the play behavior of three-point brackets and comparing the amount of play that occurred with square and rectangular slots, respectively, by using archwires of various sizes. Horizontal play with the square slot was significantly smaller than that with the rectangular slot. These data demonstrate that brackets with square slots can more effectively bring about tooth movement in the labio-lingual direction and control rotational movement with round and square archwires. Since the horizontal and vertical play ratios for the round and square wires within the square slot were approximately 1.0, three-dimensional tooth movement may also be achieved with uniform play in the vertical and horizontal directions.

KommonBase - A precise direct bonding system for labial fixed appliances.

"KommonBase" is a system designed to customize the bracket base by means of an extended resin base covering the tooth. This system enables precise bracket placement and accurate fit on teeth. Moreover, KommonBase can be easily fabricated in a laboratory and bonded on each tooth using simple clinical procedures. Straight-wire treatment without wire bending was achieved in the clinical cases presented in this article using the KommonBase system for a labial fixed appliance. The application of KommonBase to the vestibular side enables efficient orthodontic treatment using simple mechanics.

Wire load-deflection characteristics relative to different types of brackets.

OBJECTIVE: To test the hypothesis that the dimension of the bracket, both in labial and in lingual orthodontics, is a relevant parameter to determine the forces acting on the teeth, and that some wires commonly used in labial orthodontics (0.016"-diameter SS, TMA and Nitinol) are not suitable for the first phase of lingual treatment. MATERIALS AND METHODS: An ideal dental cast was bonded with eight different brackets (Damon 3MX, Ovation, Time 2, Innovation and Smart Clip Clarity on the vestibular face; STB, Adenta Time and Innovation-L on the lingual). After photographic documentation, the interbracket distance was calculated for each type of bracket, using ImageJ software. The mean elasticity modulus of the tested wires was obtained from the review of the available literature. The theoretical wire load on every tooth was calculated mathematically at three different levels of deflection (0.5mm; 1.0mm and 1.5mm), on both the labial and lingual sides, for all types of bracket. RESULTS: The lingual arch in the anterior segment is always shorter than the vestibular arch. The different brackets, having different dimensions, have an influence on the interbracket distance, and, consequently, on the wire load. At large deflections, superelastic NiTi expresses light and continuous forces, which are significantly lower than the other examined alloys. CONCLUSION: The initial hypothesis was supported. Because of the reduced interbracket distance, the adoption of superelastic wires is required in lingual mechanics and with smaller diameter compared to labial mechanotherapy, in particular during the first phases of treatment. The use of a bracket with reduced mesiodistal dimensions can contribute to reduce the load on the teeth.

A new concept of anatomic lingual arch form.

INTRODUCTION: The aim of this study was to describe a natural and anatomic lingual arch form obtained from subjects with normal occlusion that could be used, with other criteria, in the construction of personalized setups for the lingual straight-wire technique. METHODS: The study sample comprised 58 pairs of dental casts of the arches of 58 southern Europeans (37 women, 21 men) with ideal natural occlusions. After the reference points of the dental arches were identified and marked, the dental casts were scanned. The exact position of the models on the scanner was established by using an acetate sheet with a Cartesian reference system. For each image, 14 reference points (x, y) were measured and recorded. The measurements were processed with software to select the polynomial function that best described the shape of the dental arches. The ninth-degree polynomial function was selected to represent the lingual arch form of both arches. Distribution analysis of the x and y values of each tooth in each arch resulted in the creation of 3 groups (small, medium, and large) to verify the most appropriate measures of the central tendencies of our data. RESULTS: Statistical analysis showed no significant sex difference in the medians of the 6 parameters used to measure depth and width in both arches. A representation of the variability of the lingual curve of our sample was created to document at least 3 sizes of the representative curve of the central tendency for our data. No statistically significant differences in shape were found between men and women, considering the medians as a measure of the central tendencies. CONCLUSIONS: Three lingual curves (small, medium, and large) for the maxillary and mandibular arches, representing the mean values of our sample, were developed and can be used as guides for the setup in the lingual straight-wire technique.

Lingual straight wire method.

The mushroom arch-wire is mainly used in lingual orthodontic treatment but the complicated wire bending it requires affects both the treatment results and the time spent at the chair. The author proposes a new lingual straight wire method (LSW) in order to facilitate arch coordination and simplify the mechanics. The attention paid to the set-up model and bracket positioning and bonding plus the use of the new LSW method will also improve patient comfort.

Cell proliferation and expression of Cbfa-1 in a peripheral osteo-chondroma arising from the mandibular oral mucosa of an edentulous alveolar ridge.

This report describes the proliferation and the expression of Cbfa-1 in a rare case of peripheral osteo-chondroma arising from the mandibular oral mucosa of an edentulous alveolar ridge. Histologically, the lesion consisted of mesenchymal cells with either bone or cartilage tissue in the center. Almost all the tumor cells were reactive for PCNA, however, only the cells around the bone and cartilage tissues were reactive for Cbfa-1. These results suggest that both the bone and the cartilage tissues in this case were produced by mesenchymal cells that originated from the peripheral periosteum of the alveolar ridge. Furthermore, we have shown that immunohistochemical staining for PCNA and Cbfa-1 can be used to investigate lesions with bone or cartilage formation and to distinguish between those produced by osteogenic cells from those that are just reactive and produced by dystrophic calcification.