Nanoscale characteristics of conditioning film development on photobioreactor materials: influence on the initial adhesion and biofilm formation by a cyanobacterium.

Adsorption of conditioning films on a solid surface is the first step in the development of biofilms. With the goal of understanding the preliminary adhesion mechanisms of cyanobacteria on photobioreactor (PBR) materials to prevent biofouling, the physical changes occurring on PBR materials were investigated during the initial adhesion and biofilm formation by Anabaena sp. PCC 7120, a cyanobacterium that is genetically modified to produce linalool. Atomic force microscopy (AFM) revealed that the conditioning film deposition was in the form of spike-like structures on all the materials except PVC. The average heights (in the range 9 - 16 nm) of the conditioning films deposited on glass, PMMA, PC and HDPE were 11 to 20 times higher than on PVC at 96 h. The time dependent change in thickness of conditioning films correlated well with Anabaena cell attachment to the PBR materials. The rapid and significant colonization of Anabaena on glass within 48 h was consistent with the increase in thickness of the conditioning film within this time period. Lack of the conditioning film spike structures and no change in thickness of the conditioning films with time on the PVC together with comparatively delayed cell attachment and conditioning-film protein deposition on this material, indicated that the nanoscale spike structures on the other PBR materials may be accelerating the cell attachment process but are not a prerequisite for cell attachment. These results suggest that PVC should be explored further as an antifouling material for photobioreactors. The thickness of the conditioning films on glass measured by a scratch and scan method was in good agreement with the thickness values measured by an adhesive tape method, indicating that both these methods can be used for fast and reliable AFM thickness determination of bacterial conditioning films.

Conditioning film formation and its influence on the initial adhesion and biofilm formation by a cyanobacterium on photobioreactor materials.

Although cyanobacteria are a common group of microorganisms well-suited to utilization in photobioreactors (PBRs), studies of cyanobacteria fouling and its prevention are scarce. Using a cyanobacterium, Anabaena sp. PCC 7120, which had been genetically modified to enhance linalool production, the formation of conditioning films and the effects of these on the physico-chemical surface properties of various PBR materials during initial adhesion and biofilm formation were investigated. The adhesion assay revealed that the overall attachment of Anabaena was substratum dependent and no correlation between the hydrophobicity/roughness of clean material and cell attachment was found. Surface hydrophilicity/hydrophobicity of all the materials changed within 12 h due to formation of conditioning films. ATR-FTIR spectroscopy revealed that the fractional change in protein deposition between 12 to 96 h was consistent with Anabaena cell attachment but polysaccharide deposition was material specific and did not correlate with cell attachment on the PBR materials. Also, the delay in conditioning film proteins on PVC and PTFE indicated that components other than proteins may be responsible for the decrease in contact angles on these surfaces within 12 h. This indicates the important role of the chemical nature of adsorbed conditioning films in determining the initial attachment of Anabaena to PBR materials. The lower rate of attachment of Anabaena on the hydrophilic surfaces (glass and PMMA) between 72 h to 96 h (regime 3) showed that these surfaces could potentially have low fouling characteristics at extended time scales and should be considered for further research.

Production of lactic acid using a new homofermentative Enterococcus faecalis isolate.

Lactic acid is an intermediate-volume specialty chemical for a wide range of food and industrial applications such as pharmaceuticals, cosmetics and chemical syntheses. Although lactic acid production has been well documented, improved production parameters that lead to reduced production costs are always of interest in industrial developments. In this study, we describe the production of lactic acid at high concentration, yield and volumetric productivity utilizing a novel homofermentative, facultative anaerobe Enterococcus faecalis CBRD01. The highest concentration of 182 g lactic acid l(-1) was achieved after 38 h of fed-batch fermentation on glucose. The bacterial isolate utilized only 2-13% of carbon for its growth and energy metabolism, while 87-98% of carbon was converted to lactic acid at an overall volumetric productivity of 5 g l(-1) h(-1). At 13 h of fermentation, the volumetric productivity of lactate production reached 10.3 g l(-1) h(-1), which is the highest ever reported for microbial production of lactic acid. The lactic acid produced was of high purity as formation of other metabolites was less than 0.1%. The present investigation demonstrates a new opportunity for enhanced production of lactic acid with potential for reduced purification costs.

Consolidated bioprocessing of untreated switchgrass to hydrogen by the extreme thermophile Caldicellulosiruptor saccharolyticus DSM 8903.

The abilities of the extreme thermophilic bacterium Caldicellulosiruptor saccharolyticus DSM 8903 to ferment switchgrass (SWG), microcrystalline cellulose (MCC) and glucose to hydrogen (H2) in one-step were examined. Hydrogen production from glucose reached the theoretical maximum for dark fermentation of 4 mol H2/mol glucose. The H2 yield on MCC and SWG after 6 days of fermentation was 23.2 mmol H2/L or 9.4 mmol H2/g MCC and 14.3 mmol H2/L or 11.2 mmol H2/g SWG, respectively. The rate of H2 formation however was higher on MCC (0.7 mmol/Lh) than SWG (0.1 mmol/Lh). C. saccharolyticus DSM 8903 was able to produce H2 directly from mechanically-comminuted SWG without any physicochemical or biological pretreatment. Combining four processing steps (pretreatment, enzyme production, saccharification and fermentation) into a single biorefinery operation makes C. saccharolyticus DSM 8903 a promising candidate for consolidated bioprocessing (CBP) of lignocellulosic biomass.