Dietary sn-2 palmitate influences cognitive behavior by increasing the transport of liver-produced lysophosphatidylcholine VLCPUFAs to the brain.

Investigations indicated that sn-2 palmitate have positive effects on brain development, although its mechanism remains largely unexamined. This research delved into how a diet abundant in sn-2 palmitate influenced the cognitive behavior of mice and elucidated the associated mechanisms using metabolomics and lipidomics. The study demonstrated that dietary sn-2 palmitate led to improved working memory and cognition in mice, as well as an increase in brain BDNF concentration when compared to those fed blend vegetable oil (BVO). This was because sn-2 palmitate feeding promoted the synthesis of very long-chain fatty acids (VLCPUFAs) for the lysophosphatidylcholine (LPC) and lysophosphatidylethanolamine (LPE) in the liver. This led to more efficient delivery of VLCPUFAs to the brain, as indicated by elevated concentration of LPC/LPE-VLCPUFAs in the liver and heightened expression of the major facilitator superfamily domain containing 2a (MFSD2A). In essence, this paper offered a potential mechanism by which sn-2 palmitate enhanced mouse neurodevelopment.

In Situ Growth of Nitrogen-Doped Fluorescent Carbon Dots on Sisal Fibers: Investigating Their Selective and Enhanced Adsorption Capabilities for Methyl Blue Dye.

Preparing a biomass adsorbent material with high-absorption performance but low cost plays a vital role in wastewater treatment. In this study, a novel nitrogen-doped sisal fiber-based carbon dots (SF-N-CDs) composite was prepared by directly growing carbon dots (CDs) on sisal fiber (SF) using a microwave method with polyethyleneimine (PEI) as a raw material. The prepared SF-N-CDs were characterized using FTIR, XRD, Contact angle(CA), TGA, XPS, and SEM. The results revealed that the CDs were successfully grown on SF. The adsorption properties of SF-N-CDs were significantly enhanced when they adsorbed methyl blue (MeB) dye. Specifically, the adsorption of MeB by SF-N-CDs was up to 619.7 mg/g, which was about 2.6 times higher than that of raw SF. This implied that the introduction of CDs increases the adsorption site, thus enhancing the adsorption capacity. Analysis on kinetics and thermodynamics of MeB adsorption by SF-N-CDs revealed that the adsorption process followed the Langmuir isotherm model and were consistent with both kinetic models. It signifies that the adsorption involves both physical and chemical adsorption processes. Further, the SF-N-CDs maintained a removal rate of 70.9% after six adsorption-regeneration cycles, demonstrating good regeneration performance. Moreover, the SF-N-CDs could selectively separate MeB from a mixture of rhodamine B and saffron T. Consequently, the findings of this study suggest that SF-N-CDs are promising adsorbents for anionic dyes.

Differences in Absorption and Metabolism between Structured 1,3-Oleate-2-palmitate Glycerol and 1-Oleate-2-palmitate-3-linoleate Glycerol on C57BL/6J Mice.

This study investigated differences in absorption and metabolism between 1,3-oleate-2-palmitate glycerol (OPO) and 1-oleate-2-palmitate-3-linoleate glycerol (OPL) using C57BL/6J mice. OPL was associated with higher postprandial plasma total triacylglycerol (TG), low-density lipoprotein cholesterol (LDL-C) concentrations, and the ratio of LDL-C to high-density lipoprotein cholesterol (HDL-C) compared to those of OPO (p > 0.05). OPO significantly increased postprandial oleic acid (OA) concentrations compared to OPL over the entire monitoring period (p < 0.05), while OPL significantly elevated linoleic acid (LA) levels compared to OPO (p < 0.05). After 1 month of feeding, the mice in both OPO and OPL groups showed lower final weight, weight gain, and liver TG, LDL-C, and LDL/HDL concentrations compared to the control (soybean oil) group. Lipidomics results showed that OPO increased the biosynthesis of very long-chain fatty acids and decreased the abundance of AcCa (16:1), AcCa (18:2), AcCa (18:1), AcCa (16:0), CarE (16:0), and CarE (16:1) relative to OPL. These lipid metabolites were positively correlated with liver TG, LDL-C, and LDL/HDL levels and negatively related to peroxisome proliferator-activated receptors α (PPARα) and acyl-CoA oxidase (ACOX1) expression. This study showed differences in physiologic functions between OPO and OPL and provided support for the future application of OPL in infant formula.

1-Oleate-2-palmitate-3-linoleate glycerol improves lipid metabolism and gut microbiota and decreases the level of pro-inflammatory cytokines.

Numerous studies have shown that 1-oleate-2-palmitate-3-linoleate (OPL) is the most abundant TAG in Chinese human milk, which is significantly different from human milk in other countries, where 1,3-oleate-2-palmitate (OPO) is the most abundant TAG. However, there have been few studies revealing the nutritional outcomes of OPL. Hence, the present study investigated the effects of an OPL supplementation diet on mice's nutritional outcomes, including liver lipid parameters, inflammation, lipidomes in the liver and serum, and the gut bacterial community. A high OPL (HOPL) diet decreased body weight, weight gain, liver TG, TC and LDL-C, and TNF-α, IL-1ß, and IL-6 in mice relative to low OPL (LOPL) diet. Lipidomics results showed that HOPL feeding elevated the level of anti-inflammatory lipids, such as very long-chain Cer, LPC, PC and ether TG in the liver, and serum PC, and reduced the level of oxidized lipids (liver OxTG, HexCer 18:1;2O/22:0) and serum TG. In the gut, intestinal probiotics, including Parabacteroides, Alistipes, Bacteroides, Alloprevotella and Parasutterrlla, were enriched in the HOPL-fed group. Meanwhile, Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis results showed that the HOPL diet up-regulated energy metabolism and the immune system. Correlation analysis further showed that there was a relationship among the gut bacteria, lipidome profile, and nutritional outcomes. Altogether, these results indicated that an OPL-supplemented diet improved lipid metabolism and gut bacteria, reducing the level of pro-inflammatory cytokines.

Porous and Stable Zn-Series Metal-Organic Frameworks as Efficient Catalysts for Grafting Wood Nanofibers with Polycaprolactone via a Copolymerization Approach.

A hydrothermal method was used to synthesize two highly stable Zn(II) metal-organic frameworks (MOFs), namely, [Zn2(L)2(HIPA)]n (1) and [Zn9(L)6(BTEC)3(H2O)4·6H2O]n (2) (HL = 3-amino-1H-1,2,4-triazole, H2HIPA = 5-hydroxyisophthalic acid, H4BTEC = benzene-1,2,4,5-tetracarboxylic acid). The physicochemical properties of 1 and 2 were characterized using a range of analytical techniques. The scanning electron microscopy images confirmed the stability of the MOFs under heating at 120 °C for 12 h. Following their preparation, the two MOFs were used as catalysts in the grafting of poly(ε-caprolactone) on wood nanofibers (WNFs) by means of a homogeneous ring-opening polymerization protocol in an ionic liquid. The grafting ratio achieved using catalyst 1 was higher than that achieved for catalyst 2, wherein a maximum of 92.43% was obtained using the former. Under comparable reaction conditions, the grafting ratio of 1 was found to be significantly higher than those achieved using 4-dimethylamino pyridine, Sn(Oct)2, and UiO-67 catalysts. In addition, fluorescence emission was detected from the residual catalysts present in the products. The calculated electrostatic potentials and average local ionization energies indicated that the grafting of ε-caprolactone on the WNFs follows a "coordination-insertion" mechanism. Overall, these two new and efficient MOF catalysts have the potential to replace highly toxic traditional catalysts in polymerization reactions. The grafted cellulose material with fluorescence emission may also be suitable for use in biomedical applications.

Polymerized nanotips via two-photon photopolymerization.

We present new methods to produce polymerized nanotips via two-photon photopolymerization. By gradually changing the laser power, we fabricate a single polymerized tip with the size of 120nm. When two rectangle anchors with protuberances are close enough, lines with the slimmest part of about 20-30nm and tips with the widths of about 35nm are produced between anchors, which are the best resolution obtained with the resin SCR-500 to our knowledge. As the tips are adhered to larger polymerized structures, they can survive post processing in spite of their small sizes.