Bias distribution and regulation in photoelectrochemical overall water-splitting cells.

The water oxidation half-reaction at anodes is always considered the rate-limiting step of overall water splitting (OWS), but the actual bias distribution between photoanodes and cathodes of photoelectrochemical (PEC) OWS cells has not been investigated systematically. In this work, we find that, for PEC cells consisting of photoanodes (nickel-modified n-Si [Ni/n-Si] and α-Fe2O3) with low photovoltage (Vph < 1 V), a large portion of applied bias is exerted on the Pt cathode for satisfying the hydrogen evolution thermodynamics, showing a thermodynamics-controlled characteristic. In contrast, for photoanodes (TiO2 and BiVO4) with Vph > 1 V, the bias required for cathode activation can be significantly reduced, exhibiting a kinetics-controlled characteristic. Further investigations show that the bias distribution can be regulated by tuning the electrolyte pH and using alternative half-reaction couplings. Accordingly, a volcano plot is presented for the rational design of the overall reactions and unbiased PEC cells. Motivated by this, an unbiased PEC cell consisting of a simple Ni/n-Si photoanode and Pt cathode is assembled, delivering a photocurrent density of 5.3 ± 0.2 mA cm-2.

Boosting the Faradaic Efficiency of Br--Mediated Photoelectrochemical Epoxidation by Local Acidity on α-Fe2O3.

The redox mediated photoelectrochemical (PEC) or electrochemical (EC) alkene oxidation process is a promising method to produce high value-added epoxides. However, due to the competitive reaction of water oxidation and overoxidation of the mediator, the utilization of the electricity is far below the ideal value, where the loss of epoxidation's faradaic efficiency (FE) is ≈50%. In this study, a Br-/HOBr-mediated method is developed to achieve a near-quantitative selectivity and ≈100% FE of styrene oxide on α-Fe2O3, in which low concentration of Br- as mediator and locally generated acidic micro-environment work together to produce the higher active HOBr species. A variety of styrene derivatives are investigated with satisfied epoxidation performance. Based on the analysis of local pH-dependent epoxidation FE and products distribution, the study further verified that HOBr serves as the true active mediator to generate the bromohydrin intermediate. It is believed that this strategy can greatly overcome the limitation of epoxidation FE to enable future industrial applications.

A controlled non-radical chlorine activation pathway on hematite photoanodes for efficient oxidative chlorination reactions.

Photo(electro)catalytic chlorine oxidation has emerged as a useful method for chemical transformation and environmental remediation. However, the reaction selectivity usually remains low due to the high activity and non-selectivity characteristics of free chlorine radicals. In this study, we report a photoelectrochemical (PEC) strategy for achieving controlled non-radical chlorine activation on hematite (α-Fe2O3) photoanodes. High selectivity (up to 99%) and faradaic efficiency (up to 90%) are achieved for the chlorination of a wide range of aromatic compounds and alkenes by using NaCl as the chlorine source, which is distinct from conventional TiO2 photoanodes. A comprehensive PEC study verifies a non-radical "Cl+" formation pathway, which is facilitated by the accumulation of surface-trapped holes on α-Fe2O3 surfaces. The new understanding of the non-radical Cl- activation by semiconductor photoelectrochemistry is expected to provide guidance for conducting selective chlorine atom transfer reactions.

Highly Selective Ammonia Oxidation on BiVO4 Photoanodes Co-catalyzed by Trace Amounts of Copper Ions.

High-efficient photoelectrocatalytic direct ammonia oxidation reaction (AOR) conducted on semiconductor photoanodes remains a substantial challenge. Herein, we develop a strategy of simply introducing ppm levels of Cu ions (0.5-10 mg/L) into NH3 solutions to significantly improve the AOR photocurrent of bare BiVO4 photoanodes from 3.4 to 6.3 mA cm-2 at 1.23 VRHE , being close to the theoretical maximum photocurrent of BiVO4 (7.5 mA cm-2 ). The surface charge-separation efficiency has reached 90 % under a low bias of 0.8 VRHE . This AOR exhibits a high Faradaic efficiency (FE) of 93.8 % with the water oxidation reaction (WOR) being greatly suppressed. N2 is the main AOR product with FEs of 71.1 % in aqueous solutions and FEs of 100 % in non-aqueous solutions. Through mechanistic studies, we find that the formation of Cu-NH3 complexes possesses preferential adsorption on BiVO4 surfaces and efficiently competes with WOR. Meanwhile, the cooperation of BiVO4 surface effect and Cu-induced coordination effect activates N-H bonds and accelerates the first rate-limiting proton-coupled electron transfer for AOR. This simple strategy is further extended to other photoanodes and electrocatalysts.

Transition from Sequential to Concerted Proton-Coupled Electron Transfer of Water Oxidation on Semiconductor Photoanodes.

Accelerating proton transfer has been demonstrated as key to boosting water oxidation on semiconductor photoanodes. Herein, we study proton-coupled electron transfer (PCET) of water oxidation on five typical photoanodes [i.e., α-Fe2O3, BiVO4, TiO2, plasmonic Au/TiO2, and nickel-iron oxyhydroxide (Ni1-xFexOOH)-modified silicon (Si)] by combining the rate law analysis of H2O molecules with the H/D kinetic isotope effect (KIE) and operando spectroscopic studies. An unexpected and universal half-order kinetics is observed for the rate law analysis of H2O, referring to a sequential proton-electron transfer pathway, which is the rate-limiting factor that causes the sluggish water oxidation performance. Surface modification of the Ni1-xFexOOH electrocatalyst is observed to break this limitation and exhibits a normal first-order kinetics accompanied by much enhanced H/D KIE values, facilitating the turnover frequency of water oxidation by 1 order of magnitude. It is the first time that Ni1-xFexOOH is found to be a PCET modulator. The rate law analysis illustrates an effective strategy for modulating PCET kinetics of water oxidation on semiconductor surfaces.

Molecular-level Manipulation of Interface Charge Transfer on Plasmonic Metal/MOF Heterostructures.

Plasmon-excited hot carriers have drawn great attention for driving various chemical reactions, but the short lifetimes of hot carriers seriously restrict the performance of plasmonic photocatalysis. Constructing plasmonic metal/metal-organic framework (MOF) heterostructures has been proved as an effective strategy to extend the lifetimes of hot carriers. Due to the high molecular tunability of MOFs, the MOF substrate in plasmonic metal/MOF heterostructures is able to capture hot electrons on the conduction band of MOF and hot holes on its valence band, and thus offers an ideal platform to separately study the detailed mechanism of hot electron and hole transfer processes. This review focuses on a molecular-level understanding of both hot-electron and hot-hole transfer at plasmonic metal/MOF interfaces. The enhanced stability and photocatalytic performance by introducing MOF substrates are discussed for plasmonic metal/MOF heterostructures. Additionally, typical characterization technologies are also proposed as powerful tools for tracking hot carrier transfer process.

Competitive Non-Radical Nucleophilic Attack Pathways for NH3 Oxidation and H2 O Oxidation on Hematite Photoanodes.

The sluggish H2 O oxidation kinetics on photoanodes severely obstructs the overall solar-to-energy efficiency of photoelectrochemical (PEC) cells. Herein, we find a 10 to 55-fold increase of photocurrent by conducting ammonia oxidation reaction (AOR) on hematite (α-Fe2 O3 ) photoanodes under near-neutral pH (9-11) and moderate applied potentials (1.0-1.4 VRHE ) compared to H2 O oxidation. By rate law analysis and operando spectroscopic studies, we confirm the non-radical nucleophilic attack of NH3 molecules on high-valent surface Fe-O species (e.g., FeIV =O) and Fe-N species that produces NOx - and N2 , respectively, which overwhelms the nucleophilic attack of H2 O on surface FeIV =O and contributes to a high Faradaic efficiency of above 80 % for AOR. This work reveals a novel non-radical nucleophilic attack strategy, which is significantly different from the conventional indirect radical-mediated AOR mechanism, for the rational design of high-performance AOR photoelectrocatalysts.

In Situ Observation of Hot Carrier Transfer at Plasmonic Au/Metal-Organic Frameworks (MOFs) Interfaces.

Constructing heterostructures have been demonstrated as an ideal strategy for boosting charge separation on plasmonic photocatalysts, but the detailed interface charge transfer mechanism remains elusive. Herein, that authors fabricate plasmonic Au and metal-organic frameworks (MOFs, NH2 -MIL-125 and MIL-125 used in this work) heterostructures and explore the interface charge transfer mechanism by in situ electron paramagnetic resonance (EPR) spectroscopy and electrochemical measurements. The plasmon-excited hot electrons on Au can transfer across the Au/MOF interface and be captured by the coordinatively unsaturated sites of secondary building units (Ti8 O8 (OH)4 cluster) of the MOF structure, and the plasmon-excited hot holes on Au tend to transfer to and be trapped at the functionalized organic ligand (1,4-benzenedicarboxylate-NH2 ). The spatially separated hot electrons and holes exhibit boosted the photocatalytic activity for chromium (VI) reduction and selective benzyl alcohol oxidation. This work illustrates the advantage of the versatile functionalization of MOF structures enabling molecular-level manipulation of interface charge transfer on plasmonic photocatalysts.

Integration of homogeneous and heterogeneous advanced oxidation processes: Confined iron dancing with cyclodextrin polymer.

A novel catalyst which integrates heterogeneous and homogenous Fenton reactions is designed and fabricated by encapsulating 2,5-dihydroxy-1,4-benzoquinone (2,5-DBQ) in ECDP-Fe3O4, a composite of Fe3O4 nanoparticles immobilized on a ß-cyclodextrin polymer (ECDP) with ethylene diamine tetraacetic acid (EDTA) as cross-linking agent. The 2,5-DBQ@ECDP-Fe3O4 has superior catalytic performance for 4-nitrophenol and 2,4-dichlorophenol degradation compared with control systems. Mechanism study revealed that although the initial active site is Fe3O4 loaded on ECDP, the actually catalyst is the iron ions released from Fe3O4 but confined within the composite. EDTA in ß-cyclodextrin polymer can improve both the solubility and adsorption capacity to H2O2 of Fe3O4. The quinone molecules 2,5-DBQ in the ß-cyclodextrin cavity can accelerate Fe3+/Fe2+ cycle adjacent to the cavity, thus in favor of the decomposition of H2O2 into OH as main reactive oxidizing species. The current catalyst integrates the advantages of homogeneous and heterogeneous advanced oxidation processes and is promising in practical applications.