Synergistic Effects of Binary-Solvent Annealing for Efficient Polymer-Fullerene Bulk Heterojunction Solar Cells.

Conjugated polymer-fullerene-based bulk-heterojunction (BHJ) organic solar cells (OSCs) have attracted tremendous attention over the past two decades because of their potential to develop low-cost and easy methods to produce energy from light. The complicated microstructure and morphology with randomly organized architecture of these polymer-fullerene-based active layers (ALs) is a key factor that limits photovoltaic performance. In this study, a binary-solvent annealing (BSA) approach was established to improve the poly(3-hexylthiophene):indene-C60 bisadduct-based AL for efficient BHJ-type OSCs by varying the second solvents with different boiling points (BP). Thus, we were able to change the evaporation behavior of cosolvents and consequently obtain the various microstructural properties of the AL. An in-depth study was conducted on the solvent-evaporation driven morphology of the active layer under various cosolvent conditions and its effect on the photovoltaic parameters of OSCs. Under the BSA processes, we found that the specimens with low-BP second solvents allows us to observe a more ideal AL for increasing photon absorption and efficient charge transport and collection at the respective electrodes, resulting in enhanced PCE of the corresponding OSCs. By contrast, the specimens with high-BP second solvents exhibit random microstructures, which are detrimental to charge transport and collection and lead to diminished PCE of the corresponding OSCs. By appropriately selecting the composition of a binary solvent, BSA can be employed as an easy method for the effective manipulation of the microstructures of ALs. BSA is a promising technique for the performance enhancement of not only OSCs but also other organic/polymeric-based electronic devices.

A nanoscale study of charge extraction in organic solar cells: the impact of interfacial molecular configurations.

In the optimization of organic solar cells (OSCs), a key problem lies in the maximization of charge carriers from the active layer to the electrodes. Hence, this study focused on the interfacial molecular configurations in efficient OSC charge extraction by theoretical investigations and experiments, including small molecule-based bilayer-heterojunction (sm-BLHJ) and polymer-based bulk-heterojunction (p-BHJ) OSCs. We first examined a well-defined sm-BLHJ model system of OSC composed of p-type pentacene, an n-type perylene derivative, and a nanogroove-structured poly(3,4-ethylenedioxythiophene) (NS-PEDOT) hole extraction layer. The OSC with NS-PEDOT shows a 230% increment in the short circuit current density compared with that of the conventional planar PEDOT layer. Our theoretical calculations indicated that small variations in the microscopic intermolecular interaction among these interfacial configurations could induce significant differences in charge extraction efficiency. Experimentally, different interfacial configurations were generated between the photo-active layer and the nanostructured charge extraction layer with periodic nanogroove structures. In addition to pentacene, poly(3-hexylthiophene), the most commonly used electron-donor material system in p-BHJ OSCs was also explored in terms of its possible use as a photo-active layer. Local conductive atomic force microscopy was used to measure the nanoscale charge extraction efficiency at different locations within the nanogroove, thus highlighting the importance of interfacial molecular configurations in efficient charge extraction. This study enriches understanding regarding the optimization of the photovoltaic properties of several types of OSCs by conducting appropriate interfacial engineering based on organic/polymer molecular orientations. The ultimate power conversion efficiency beyond at least 15% is highly expected when the best state-of-the-art p-BHJ OSCs are combined with present arguments.

The importance of p-n junction interfaces for efficient small molecule-based organic solar cells.

The efficiency of small-molecule solar cells critically depends on the match of the junction of the donor and acceptor semiconductors used in these devices to create charged carriers and on the mobility of individual components to transport holes and electrons. In the present study, a 2% efficient bilayer organic solar cell consisting of a p-type semiconductor, pentacene, and an n-type semiconductor, N,N'-diheptyl-3,4,9,10-perylenetetracarboxylic diimide (PTCDI-C(7)), is fabricated. The morphology of PTCDI-C(7) interestingly follows pentacene due to the matched surface energy of these two active layers and the easily deposited PTCDI-C(7) monomers on an inclined plane of the pentacene grains. This condition results in the low trap states in the PTCDI-C(7) film and at the pentacene/PTCDI-C(7) interface for the enhancement of exciton dissociation and carrier transport compared with the photoactive layer comprised of pentacene and N,N-ditridecyl-3,4,9,10-perylenetetracarboxylic diimide (PTCDI-C(13)). The detailed exciton and carrier transport mechanisms are investigated using time-resolved photoluminescence and X-ray diffraction spectroscopy.

Electron transport properties in fluorinated copper-phthalocyanine films: importance of vibrational reorganization energy and molecular microstructure.

Electron transport (ET) properties of a series of fluorinated copper-phthalocyanine (F(16)CuPc) thin films, which were deposited at different substrate temperatures (T(sub)) ranging from 30 to 150 degrees C, have been investigated by quantum mechanical calculations of the reorganization energy (lambda(reorg)), X-ray diffraction (XRD), atomic force microscopy (AFM), and microRaman spectroscopy. Density functional theory calculations were used to predict the vibrational frequencies, normal mode displacement vectors, and electron-vibrational lambda(reorg) for the F(16)CuPc molecule. The electron mobilities (mu(e)) of F(16)CuPc thin films are strongly dependent on the T(sub), and the value of mu(e) increases with increasing T(sub) from 30 to 120 degrees C, at which point it reaches its maximum value. The importance of electron-vibrational coupling and molecular microstructures for ET properties in F(16)CuPc thin films are discussed on the basis of theoretical vibrational lambda(reorg) calculations and experimental observations of resonance Raman spectra. We observed a good correlation between mu(e) and the full-width-at-half-maximum of the vibrational bands, which greatly contributed to lambda(reorg) and/or which reflects the molecular microstructural quality of the active channel. In contrast, the crystal size analysis by XRD and surface grain morphology by AFM did not reveal a clear correlation with the ET behaviours for these different F(16)CuPc thin films. Therefore, we suggest that for organic films with weak intermolecular interactions, such as F(16)CuPc, optimized microscopic molecular-scale parameters are highly important for efficient long-range charge transport in the macroscopic devices.