Novel meroterpene-like compounds inhibit ferroptosis through Fe2+ chelation.

Colorectal cancer (CRC) is the third most common type of cancer in the world. It is characterized by complex crosstalk between various signaling pathways, as a result of which it is highly challenging to identify optimal therapeutic targets and design treatment strategies. In this study, we tested the effect of 700 compounds on the CRC cell line HT-29 by using the sulforhodamine B assay and screened out 17 compounds that exhibited high toxicity (indicated by an inhibition rate of ≥75% when applied at a concentration of 10µM) against the HT-29 cell line. Next, we investigated the mechanisms underlying the effects of these 17 highly toxic compounds. The results of ferroptosis analysis and electron microscopy showed that compounds 575 and 578 were able to significantly reverse RSL3-induced increase in ferroptosis, while compound 580 had a less pronounced ferroptosis-regulating effect. In subsequent experiments, western blotting showed that compounds 575, 578, and 580, which belong to a class of meroterpene-like compounds that affect ferroptosis, do not induce autophagy or apoptosis in the CRC cell line. Instead, Fe2+ chelation experiments showed that these three compounds can serve as iron chelators by chelating Fe2+ at a 1:1 (chelator: Fe2+) ratio. Specifically, the aldehyde and hydroxyl groups of the benzene ring in these compounds may chelate Fe2+, thus reducing Fe2+ levels in cells and inhibiting ferroptosis. These results indicate that these novel meroterpene-like compounds are potential therapeutic small-molecule candidates for targeting ferroptosis in tumors.

One-Dimensional Crystal-Structure Te-Se Alloy for Flexible Shortwave Infrared Photodetector and Imaging.

Flexible shortwave infrared detectors play a crucial role in wearable devices, bioimaging, automatic control, etc. Commercial shortwave infrared detectors face challenges in achieving flexibility due to the high fabrication temperature and rigid material properties. Herein, we develop a high-performance flexible Te0.7Se0.3 photodetector, resulting from the unique 1D crystal structure and small elastic modulus of Te-Se alloying. The flexible photodetector exhibits a broad-spectrum response ranging from 365 to 1650 nm, a fast response time of 6 µs, a broad linear dynamic range of 76 dB, and a specific detectivity of 4.8 × 1010 Jones at room temperature. The responsivity of the flexible detector remains at 93% of its initial value after bending with a small curvature of 3 mm. Based on the optimized flexible detector, we demonstrate its application in shortwave infrared imaging. These results showcase the great potential of Te0.7Se0.3 photodetectors for flexible electronics.

Circularly polarized light emission and detection by chiral inorganic semiconductors.

Chiral inorganic semiconductors with high dissymmetric factor are highly desirable, but it is generally difficult to induce chiral structure in inorganic semiconductors because of their structure rigidity and symmetry. In this study, we introduced chiral ZnO film as hard template to transfer chirality to CsPbBr3 film and PbS quantum dots (QDs) for circularly polarized light (CPL) emission and detection, respectively. The prepared CsPbBr3/ZnO thin film exhibited CPL emission at 520 nm and the PbS QDs/ZnO film realized CPL detection at 780 nm, featuring high dissymmetric factor up to around 0.4. The electron transition based mechanism is responsible for chirality transfer.

Double Perovskite Single Crystals with High Laser Irradiation Stability for Solid-State Laser Lighting and Anti-counterfeiting.

Laser lighting devices, comprising an ultraviolet (UV) laser chip and a phosphor material, have emerged as a highly efficient approach for generating high-brightness light sources. However, the high power density of laser excitation may exacerbate thermal quenching in conventional polycrystalline or amorphous phosphors, leading to luminous saturation and the eventual failure of the device. Here, for the first time, we raise a single-crystal (SCs) material for laser lighting considering the absence of grain boundaries that scatter electrons and phonons, achieving high thermal conductivity (0.81 W m-1 K-1) and heat-resistance (575 °C). The SCs products exhibit a high photoluminescence quantum yield (89%) as well as excellent stability toward high-power lasers (>12.41 kW/cm2), superior to all previously reported amorphous or polycrystalline matrices. Finally, the laser lighting device was fabricated by assembling the SC with a UV laser chip (50 mW), and the device can maintain its performance even after continuous operation for 4 h. Double perovskite single crystals doped with Yb3+/Er3+ demonstrated multimodal luminescence with the irradiation of 355 and 980 nm lasers, respectively. This characteristic holds significant promise for applications in spectrally tunable laser lighting and multimodal anticounterfeiting.

π-π Stacking at the Perovskite/C60 Interface Enables High-Efficiency Wide-Bandgap Perovskite Solar Cells.

Interface passivation is a key method for improving the efficiency of perovskite solar cells, and 2D/3D perovskite heterojunction is the mainstream passivation strategy. However, the passivation layer also produces a new interface between 2D perovskite and fullerene (C60), and the properties of this interface have received little attention before. Here, the underlying properties of the 2D perovskite/C60 interface by taking the 2D TEA2PbX4 (TEA = C6H10NS; X = I, Br, Cl) passivator as an example are systematically expounded. It is found that the 2D perovskite preferentially exhibits (002) orientation with the outermost surface featuring an oriented arrangement of TEACl, where the thiophene groups face outward. The outward thiophene groups further form a strong π-π stacking system with C60 molecule, strengthening the interaction force with C60 and facilitating the creation of a superior interface. Based on the vacuum-assisted blade coating, wide-bandgap (WBG, 1.77 eV) perovskite solar cells achieved impressive records of 19.28% (0.09 cm2) and 18.08% (1.0 cm2) inefficiency, respectively. This research not only provides a new understanding of interface processing for future perovskite solar cells but also lays a solid foundation for realizing efficient large-area devices.

In-Synthesis Se-Stabilization Enables Defect and Doping Engineering of HgTe Colloidal Quantum Dots.

Colloidal Quantum Dots (CQDs) of mercury telluride (HgTe) hold particular appeal for infrared photodetection due to their widely tunable infrared absorption and good compatibility with silicon electronics. While advances in surface chemistry have led to improved CQD solids, the chemical stability of HgTe material is not fully emphasized. In this study, it is aimed to address this issue and identifies a Se-stabilization strategy based on the surface coating of Se on HgTe CQDs via engineering in the precursor reactivity. The presence of Se-coating enables HgTe CQDs with improved colloidal stability, passivation, and enhanced degree of freedom in doping tuning. This enables the construction of optimized p-i-n HgTe CQD infrared photodetectors with an ultra-low dark current 3.26 × 10-6 A cm⁻2 at -0.4 V and room-temperature specific detectivity of 5.17 × 1011 Jones at wavelength ≈2 um, approximately one order of magnitude improvement compared to that of the control device. The stabilizing effect of Se is well preserved in the thin film state, contributing to much improved device stability. The in-synthesis Se-stabilization strategy highlights the importance of the chemical stability of materials for the construction of semiconductor-grade CQD solids and may have important implications for other high-performance CQD optoelectronic devices.

Thermally Evaporated Blue Quasi-Two-Dimensional Perovskite Light-Emitting Diodes via Low-Dimensional Phase Distribution Arrangement.

Perovskite light-emitting diodes (PeLEDs) have shown great potential in the display domain due to their wide color gamut, narrow emission, and low cost. In current PeLEDs manufacturing methods, thermal evaporation shows great competitiveness with its advantages of easy patterning, production line compatibility, and solvent-free processability. However, the development of thermally evaporated blue PeLEDs is limited by their low radiative recombination rate and high defect density. Herein, we report high-performance thermally evaporated blue PeLEDs by in situ introduction of ammonium cations. We confirm that phenethylammonium (PEA+) has lower adsorption energy, which significantly reduces the low-n phases in a quasi-2D perovskite film. The energy transfer rate is also promoted by the PEA+ addition. As a result, we fabricate blue PeLEDs with an external quantum efficiency of 1.56% by thermal evaporation. The strategy of arranging phase distribution could benefit the industrialization of full-color PeLEDs.

Quantum ghost imaging of a vector field.

Quantum ghost image technique utilizing position or momentum correlations between entangled photons can realize nonlocal reconstruction of the image of an object. In this work, based on polarization entanglement, we experimentally demonstrate quantum ghost imaging of vector images by using a geometric phase object. We also provide a corresponding theoretical analysis. Additionally, we offer a geometrical optics path explanation of ghost imaging for vector fields. The proposed strategy offers new insights into the fundamental development of ghost imaging and also holds great promise for developing complex structured ghost imaging techniques. Our work expanding the principle of ghost imaging to spatially varying vector beams will lead to interesting developments of this field.

Inubritantrimers A-D: Trimerized Sesquiterpenoid [4 + 2] Adducts Featuring a Distinctive Spiro-Polycyclic Scaffold from Inula britannica.

Inubritantrimer A (1), a trace trimerized sesquiterpenoid [4 + 2] adduct featuring an unusual exo-exo type spiro-polycyclic scaffold, together with three new endo-exo [4 + 2] adducts, inubritantrimers B-D (2-4), were discovered from the flowers of Inula britannica. Their structures were elucidated using 1D/2D NMR, X-ray diffraction, and ECD approaches. 1 is characterized as a novel exo-exo trimer, synthesized biogenetically from three sesquiterpenoid monomers, featuring a unique linkage of C-11/C-1', C-13/C-3' and C-13'/C-3″, C-11'/C-1″ through a two-step exo [4 + 2] cycloaddition process. Compounds 1-4 exhibited modest cytotoxicity against breast cancer cells with IC50 values in the range of 5.84-12.01 µM.

Short-Wave Infrared Detection and Imaging Employing Size-Customized HgTe Nanocrystals.

HgTe nanocrystals (NCs) possess advantages including tunable infrared absorption spectra, solution processability, and low fabrication costs, offering new avenues for the advancement of next-generation infrared detectors. In spite of great synthetic advances, it remains essential to achieve customized synthesis of HgTe NCs in terms of industrial applications. Herein, by taking advantage of a high critical nucleation concentration of HgTe NCs, a continuous-dropwise (CD) synthetic approach that features the addition of the anion precursors in a feasible drop-by-drop fashion is demonstrated. The slow reaction dynamics enable size-customized synthesis of HgTe NCs with sharp band tails and wide absorption range fully covering the short- and mid-infrared regions. More importantly, the intrinsic advantages of CD process ensure high-uniformity and scale-up synthesis from batch to batch without compromising the excitonic features. The resultant HgTe nanocrystal photodetectors show a high room-temperature detectivity of 8.1 × 1011 Jones at 1.7 µm cutoff absorption edge. This CD approach verifies a robust method for controlled synthesis of HgTe NCs and might have important implications for scale-up synthesis of other nanocrystal materials.

Reconfigurable perovskite X-ray detector for intelligent imaging.

X-ray detection is widely used in various applications. However, to meet the demand for high image quality and high accuracy diagnosis, the raw data increases and imposes challenges for conventional X-ray detection hardware regarding data transmission and power consumption. To tackle these issues, we present a scheme of in-X-ray-detector computing based on CsPbBr3 single-crystal detector with convenient polarity reconfigurability, good linear dynamic range, and robust stability. The detector features a stable trap-free device structure and achieves a high linear dynamic range of 106 dB. As a result, the detector could achieve edge extraction imaging with a data compression ratio of ~50%, and could also be programmed and trained to perform pattern recognition tasks with a high accuracy of 100%. Our research shows that in-X-ray-detector computing can be used in flexible and complex scenarios, making it a promising platform for intelligent X-ray imaging.

Stereo-Hindrance Engineering of A Cation toward <110>-Oriented 2D Perovskite with Minimized Tilting and High-Performance X-Ray Detection.

2D <100>-oriented Dion-Jacobson or Ruddlesden-Popper perovskites are widely recognized as promising candidates for optoelectronic applications. However, the large interlayer spacing significantly hinders the carrier transport. <110>-oriented 2D perovskites naturally exhibit reduced interlayer spacings, but the tilting of metal halide octahedra is typically serious and leads to poor charge transport. Herein, a <110>-oriented 2D perovskite EPZPbBr4 (EPZ = 1-ethylpiperazine) with minimized tilting is designed through A-site stereo-hindrance engineering. The piperazine functional group enters the space enclosed by the three [PbBr6]4- octahedra, pushing Pb─Br─Pb closer to a straight line (maximum Pb─Br─Pb angle ≈180°), suppressing the tilting as well as electron-phonon coupling. Meanwhile, the ethyl group is located between layers and contributes an extremely reduced effective interlayer distance (2.22 Å), further facilitating the carrier transport. As a result, EPZPbBr4 simultaneously demonstrates high µτ product (1.8 × 10-3 cm2 V-1) and large resistivity (2.17 × 1010 Ω cm). The assembled X-ray detector achieves low dark current of 1.02 × 10-10 A cm-2 and high sensitivity of 1240 µC Gy-1 cm-2 under the same bias voltage. The realized specific detectivity (ratio of sensitivity to noise current density, 1.23 × 108 µC Gy-1 cm-1 A-1/2) is the highest among all reported perovskite X-ray detectors.

Planar Cation Passivation on Colloidal Quantum Dots Enables High-Performance 0.35-1.8 µm Broadband TFT Imager.

Solution-processed colloidal quantum dots (CQDs) are promising candidates for broadband photodetectors from visible light to shortwave infrared (SWIR). However, large-size PbS CQDs sensitive to longer SWIR are mainly exposed with nonpolar (100) facets on the surface, which lack robust passivation strategies. Herein, an innovative passivation strategy that employs planar cation, is introduced to enable face-to-face coupling on (100) facets and strengthen halide passivation on (111) facets. The defect density of CQDs film (Eg ≈ 0.74 eV) is reduced from 2.74 × 1015 to 1.04  × 1015 cm-3, coupled with 0.1 eV reduction in the activation energy of defects. The resultant CQDs photodiodes exhibit a low dark current density of 14 nA cm-2 with a high external quantum efficiency (EQE) of 62%, achieving a linear dynamic range of 98 dB, a -3dB bandwidth of 103 kHz and a detectivity of 4.7 × 1011 Jones. The comprehensive performance of the CQDs photodiodes outperforms previously reported CQDs photodiodes operating at >1.6 µm. By monolithically integrated with thin-film transistor (TFT) readout circuit, the broadband CQDs imager covering 0.35-1.8 µm realizes the functions including silicon wafer perspectivity and material discrimination, showing its potential for wide range of applications.

Efficient 3D imaging and pathological analysis of the human lymphoma tumor microenvironment using light-sheet immunofluorescence microscopy.

Rationale: The composition and spatial structure of the lymphoma tumor microenvironment (TME) provide key pathological insights for tumor survival and growth, invasion and metastasis, and resistance to immunotherapy. However, the 3D lymphoma TME has not been well studied owing to the limitations of current imaging techniques. In this work, we take full advantage of a series of new techniques to enable the first 3D TME study in intact lymphoma tissue. Methods: Diverse cell subtypes in lymphoma tissues were tagged using a multiplex immunofluorescence labeling technique. To optically clarify the entire tissue, immunolabeling-enabled three-dimensional imaging of solvent-cleared organs (iDISCO+), clear, unobstructed brain imaging cocktails and computational analysis (CUBIC) and stabilization to harsh conditions via intramolecular epoxide linkages to prevent degradation (SHIELD) were comprehensively compared with the ultimate dimensional imaging of solvent-cleared organs (uDISCO) approach selected for clearing lymphoma tissues. A Bessel-beam light-sheet fluorescence microscope (B-LSFM) was developed to three-dimensionally image the clarified tissues at high speed and high resolution. A customized MATLAB program was used to quantify the number and colocalization of the cell subtypes based on the acquired multichannel 3D images. By combining these cutting-edge methods, we successfully carried out high-efficiency 3D visualization and high-content cellular analyses of the lymphoma TME. Results: Several antibodies, including CD3, CD8, CD20, CD68, CD163, CD14, CD15, FOXP3 and Ki67, were screened for labeling the TME in lymphoma tumors. The 3D imaging results of the TME from three types of lymphoma, reactive lymphocytic hyperplasia (RLN), diffuse large B-cell lymphoma (DLBCL), and angioimmunoblastic T-cell lymphoma (AITL), were quantitatively analyzed, and their cell number, localization, and spatial correlation were comprehensively revealed. Conclusion: We present an advanced imaging-based method for efficient 3D visualization and high-content cellular analysis of the lymphoma TME, rendering it a valuable tool for tumor pathological diagnosis and other clinical research.

Electrohydrodynamically Printed d-f Transition Cerium(III) Complex.

The d-f transition rare earth complexes have recently emerged as a promising candidate for display applications due to the parity-allowed transition, high photoluminescence quantum yield (PLQY), short excited lifetime, and tunable emissions. Besides, inkjet printing has been regarded as an important technique for realizing full-color display. However, inkjet-printed d-f transition rare earth complexes have not been investigated. Herein, for the first time, we explored d-f transition cerium(III) complex 2-Me as the luminescent material by inkjet printing. With 1,2-dichlorobenzene as solvent and polystyrene as an additive, 2-Me film exhibits a similar emission peak and excited-state lifetime with 2-Me powder and a high PLQY of 45%, demonstrating the excellent stability of 2-Me ink. Finally, we suppressed the coffee ring effect and prepared the first inkjet-printed pattern ''HUST'' composed of d-f transition rare earth complex ink with uniform blue fluorescence. Our pioneering work provides a promising alternative for inkjet printing inks.

Insight into the High Mobility and Stability of In2 O3 :H Film.

Wide bandgap semiconductors, particularly In2 O3 :Sn (ITO), are widely used as transparent conductive electrodes in optoelectronic devices. Nevertheless, due to the strohave beenng scattering probability of high-concentration oxygen vacancy (VO ) defects, the mobility of ITO is always lower than 40 cm2  V-1  s-1 . Recently, hydrogen-doped In2 O3 (In2 O3 :H) films have been proven to have high mobility (>100 cm2  V-1  s-1 ), but the origin of this high mobility is still unclear. Herein, a high-resolution electron microscope and theoretical calculations are employed to investigate the atomic-scale mechanisms behind the high carrier mobility in In2 O3 :H films. It is found that VO can cause strong lattice distortion and large carrier scattering probability, resulting in low carrier mobility. Furthermore, hydrogen doping can simultaneously reduce the concentration of VO , which accounts for high carrier mobility. The thermal stability and acid-base corrosion mechanism of the In2 O3 :H film are investigated and found that hydrogen overflows from the film at high temperatures (>250 °C), while acidic or alkaline environments can cause damage to the In2 O3 grains themselves. Overall, this work provides insights into the essential reasons for high carrier mobility in In2 O3 :H and presents a new research approach to the doping and stability mechanisms of transparent conductive oxides.

All-Thermally Evaporated Blue Perovskite Light-Emitting Diodes for Active Matrix Displays.

With the rapid progress of perovskite light-emitting diodes (PeLEDs), the large-scale fabrication of active matrix PeLED displays (AM-PeLEDs) is gaining increasing attention. However, the integration of high-resolution PeLED arrays with thin-film transistor backplanes remains a significant challenge for conventional spin-coating techniques. Here, the demonstration of large-area, blue-emitting AM-PeLEDs are demonstrated using a vacuum deposition technique, which is regarded as the most effective route for organic light-emitting diode displays. By the introduction of an in situ passivation strategy, the defects-related nonradiative recombination is largely suppressed, which leads to an improved photoluminescence quantum yield of vapor-deposited blue-emitting perovskites. The as-prepared blue PeLEDs exhibit a peak external quantum efficiency of 2.47% with pure-blue emission at 475 nm, which represents state-of-the-art performance for vapor-deposited pure-blue PeLEDs. Benefiting from the excellent uniformity and compatibility of thermal evaporation, the 6.67-inch blue-emitting AM-PeLED display with a high resolution of 394 pixels per inch is successfully demonstrated. The demonstration of blue-emitting AM-PeLED display represents a crucial step toward full-color perovskite display technology.

(Bi,Sb)2 Se3 Alloy Thin Film for Short-Wavelength Infrared Photodetector and TFT Monolithic-Integrated Matrix Imaging.

Short-wavelength infrared photodetectors play a significant role in various fields such as autonomous driving, military security, and biological medicine. However, state-of-the-art short-wavelength infrared photodetectors, such as InGaAs, require high-temperature fabrication and heterogenous integration with complementary metal-oxide-semiconductor (CMOS) readout circuits (ROIC), resulting in a high cost and low imaging resolution. Herein, for the first time, a low-cost, high-performance, high-stable, and thin-film transistor (TFT) ROIC monolithic-integrated (Bi,Sb)2 Se3 alloy thin-film short-wavelength infrared photodetector is reported. The (Bi,Sb)2 Se3 alloy thin-film short-wavelength infrared photodetectors demonstrate a high external quantum efficiency (EQE) of 21.1% (light intensity of 0.76 µW cm-2 ) and a fast response time (3.24 µs). The highest EQE is about two magnitudes than that of the extrinsic photoconduction of Sb2 Se3 (0.051%). In addition, the unpackaged devices demonstrate high electric and thermal stability (almost no attenuation at 120 °C for 312 h), showing potential for in-vehicle applications that may experient such a high temperature. Finally, both the (Bi,Sb)2 Se3 alloy thin film and n-type CdSe buffer layer are directly deposited on the TFT ROIC (with a 64 × 64-pixel array) with a low-temperature process and the material identification and imaging applications are presented. This work is a significant breakthrough in ROIC monolithic-integrated short-wavelength infrared imaging chips.

Dimerized sesquiterpenoid [4 + 2] adducts with ferroptosis-promoting activity from Inula britannica Linn.

Inubritanolides C and D (1 and 2), two exo sesquiterpenoid [4 + 2] adducts with unprecedented interconverting conformations of twist-chair and chair, together with two previously undescribed endo [4 + 2] dimers (3 and 4) were discovered from Inula britannica flowers. Dimers 1 and 2 have an undescribed carbon skeleton comprising of eudesmanolide and guaianolide units with the linkage mode of C-11/C-1' and C-13/C-3' via a Diels-Alder cycloaddition reaction. Their structures were elucidated using 1D/2D NMR, X-ray diffraction, ECD, and variable-temperature NMR experiments. Dimer 2 displayed a strong inhibitory effect on breast cancer cells by promoting lipid ROS production, showing its potential as ferroptosis inducer.

Video-rate 3D imaging of living cells using Fourier view-channel-depth light field microscopy.

Interrogation of subcellular biological dynamics occurring in a living cell often requires noninvasive imaging of the fragile cell with high spatiotemporal resolution across all three dimensions. It thereby poses big challenges to modern fluorescence microscopy implementations because the limited photon budget in a live-cell imaging task makes the achievable performance of conventional microscopy approaches compromise between their spatial resolution, volumetric imaging speed, and phototoxicity. Here, we incorporate a two-stage view-channel-depth (VCD) deep-learning reconstruction strategy with a Fourier light-field microscope based on diffractive optical element to realize fast 3D super-resolution reconstructions of intracellular dynamics from single diffraction-limited 2D light-filed measurements. This VCD-enabled Fourier light-filed imaging approach (F-VCD), achieves video-rate (50 volumes per second) 3D imaging of intracellular dynamics at a high spatiotemporal resolution of ~180 nm × 180 nm × 400 nm and strong noise-resistant capability, with which light field images with a signal-to-noise ratio (SNR) down to -1.62 dB could be well reconstructed. With this approach, we successfully demonstrate the 4D imaging of intracellular organelle dynamics, e.g., mitochondria fission and fusion, with ~5000 times of observation.