[Pseudo-targeted metabolomics for differential components of Rhei Radix et Rhizoma from three plant species].

Rhei Radix et Rhizoma is common traditional Chinese medicine with multiple original plants. The content and proportion of the active components in Rhei Radix et Rhizoma from different plant species were compared to accurately evaluate the medicine qua-lity and provide a theoretical basis for precise use of this medicine in clinical practice. In this study, fresh Rhei Radix et Rhizoma samples were collected from the four-year-old plants of Rheum palmatum, R. tanguticum, and R. officinale. The relative content of 220 anthraquinones, anthrones, and tannins in the samples were determined by pseudo-targeted metabolomics, and the differential components were screened by multivariate statistical methods. The principal component analysis classified the samples into three clusters according to the original plants. The orthogonal partial least squares-discriminant analysis(OPLS-DA) screened out 117 differential components, including 8 free anthraquinones, 18 anthraquinone glycosides, 80 anthrones, and 11 tannins. Twenty-eight components had the highest content in R. tanguticum, mainly including sennosides, anthraquinone glycosides, and procyanidins. Thirty-five components showed the highest content in R. officinale, mainly including free anthraquinones and catechines. Fifty-four components showed the highest content in R. palmatum, mainly including dianthrones, while the structures of most of them cannot be determined temporarily. The content distribution of differential components in the three original plants indicates that R. tanguticum has the strongest effect of purging, while R. officinale has the strongest effect of clearing heat and purging fire, and both have stronger effects of resolvong stasis and dredging meridians than R. palmatum.

RACK1 mediates the advanced glycation end product-induced degradation of HIF-1α in nucleus pulposus cells via competing with HSP90 for HIF-1α binding.

Hyperglycemia can drive advanced glycation end product (AGE) accumulation and associated nucleus pulposus cell (NPC) dysfunction, but the basis for this activity has not been elucidated. Hypoxia-inducible factor-1α (HIF-1α) is subject to cell-type-specific AGE-mediated regulation. In the current study, we assessed the mechanistic relationship between AGE accumulation and HIF-1α degradation in NPCs. Immunohistochemical staining of degenerated nucleus pulposus (NP) samples was used to assess AGE levels. AGE impact on NPC survival and glycolysis-related gene expression was assessed via 3-(4,5)-dimethylthiazol(-z-y1)-3,5-di-phenyltetrazolium bromide assay and quantitative reverse-transcription polymerase chain reaction (qRT-PCR), while HIF-1α expression in NPCs following AGE treatment was monitored via Western blot analysis and qRT-PCR. Additionally, a luciferase reporter assay was used to monitor HIF-1α transcriptional activity. The importance of the receptor for activated C-kinase 1 (RACK1) as a mediator of HIF-1α degradation was evaluated through gain- and loss-of-function experiments. Competitive binding of RACK1 and HSP90 to HIF-1α was evaluated via immunoprecipitation. Increased AGE accumulation was evident in NP samples from diabetic patients, and AGE treatment resulted in reduced HIF-1α protein levels in NPCs that coincided with reduced HIF-1α transcriptional activity. AGE treatment impaired the stability of HIF-1α, leading to its RACK1-mediated proteasomal degradation in a manner independent of the canonical PHD-mediated degradation pathway. Additionally, RACK1 competed with HSP90 for HIF-1α binding following AGE treatment. AGE treatment of NPCs leads to HIF-1α protein degradation. RACK1 competes with HSP90 for HIF-1α binding following AGE treatment, resulting in posttranslational HIF-1α degradation. These results suggest that AGE is an intervertebral disc degeneration risk factor, and highlight potential avenues for the treatment or prevention of this disease.

[Radiographic anatomical analysis of the pelvic Teepee view].

OBJECTIVES: To research radiographic anatomy of the main structure of the pelvic Teepee view, including its azimuth direction and view anatomy structure. METHODS: From June 2013 to June 2014 adult pelvic CT examination results were filtered, excluding skeletal deformities and pelvic osseous destruction caused by tumors, trauma, etc. The data of 2.0 mm contiguous CT scan of 9 adults' intact pelves was,selected and input into Mimics 10.01 involving 7 males and 2 females with an average age of (41.2±10.3) years old. Utilizing the software, the 3D CT reconstructions of the pelves were completed. Setting the transparency being high,the pelvic 3D reconstructions were manipulated from the pelvic anteroposterior view to the combined obturator oblique outlet view and fine-tuned till the regular Teepee-or teardrop-shaped appearance emerges. Cutting tools of the software were at the moment applied to separate the "Teepee" from the main pelvis for each reconstruction. Then the "Teepee" and the rest (main) part of the pelvis were displayed in different color to facilitate the analysis on the Teepee, iliac-oblique, and anteroposterior views. RESULTS: The "Teepee" started from the posterolateral aspect of the anterior inferior iliac spine and finished at the cortex between the posterior superior iliac spine and the posterior inferior iliac spine in a direction of being from caudal-anterior-lateral to cranial-posterior-medial. The radiographic anatomical composition of the "Teepee" contained one tip, one base,and two aspects. With the inner and outer iliac tables being the inner and outer aspects of the "Teepee", the tip is consequently formed by their intersection. The base is imaged from the cortex of the greater sciatic notch. The medial-inferior-posterior portion of the "Teepee" contains a small part of sacroiliac joint and its corresponding side of bone of the sacrum. CONCLUSIONS: The "Teepee" is a zone of ample osseous structures of the pelvis, aside from a small medial-inferior-posterior portion, the main zone of which can be accepted as a safe osseous zone for the anchor of implants stabilizing certain pelvic and acetabular fracture patterns. The Teepee view can be utilized as guidance for the safe percutaneous insertion of such implants.

[Influence of the included angle between anterior aspects of S2 and S1 vertebral bodies on pelvic inlet imaging in mid-line sagittal plane].

OBJECTIVE: To analyze the influence of included angle between the anterior aspects of S2 and S vertebral bodies on pelvic inlet imaging in the pelvic midline sagittal plane. METHODS: Totally 58 axial pelvic CT scans were chosen as study objects including 43 males and 15 females,with an average age of 40.7 years old (ranged,18 to 68 years old). The angles between the anterior aspects of S2 and S1, vertebral bodies and the horizontal plane on midline sagittal CT reconstruction were measured to simulate the optimal S2 and S1 inlet angles. The included angle between the anterior aspects of S2 and S1 vertebral bodies was calculated by subtrocting the S1,inlet angle from the S2 inlet angle defined as a base number. Then, the impact of the calculated included angles on the pelvic inlet imaging was analyzed. Results:The S2 inlet angles averaged (30.5±6.5) degrees; the S inlet angles averaged (25.7±5.9) degrees. The difference between them was significant (t=3.35, P=0.001). Ten patients had zero angle between the anterior aspects of S2 and S1 vertebral bodies; 14 patients had negative angle, averaged-(8.9±8.1) degrees; 34 patients had positive angle,averaged (11.8+6.4) degrees. CONCLUSION: The difference of included angle between the anterior aspects of S2 and S1 vertebral bodies leads to the difference between S1 inlet view and S2 inlet view in most cases, complicating the pelvic inlet imaging,and affecting the reliability of the application of pelvic inlet view. Utilizing the angles measured on the preoperative midlihe sagittal CT reconstruction to obatin the patient-customized S1 and S2 inlet views could accurately guide the S1 and S2 iliosacral screw insertion.

[Effect of the anterior aspect of sacral nerve root tunnel on iliosacral screw placement on the standard lateral image of sacrum].

OBJECTIVE: To introduce the location and course of S1, S2 sacral nerve root tunnel and to clarify the significance of the anterior aspect of sacral nerve root tunnel on placement of iliosacral screw on the standard lateral sacral view. METHODS: Firstly the data of 2.0 mm slice pelvic axial CT images were imported into Mimics 10.0, and the sacrum, innominate bones, and sacral nerve root tunnels were reconstructed into 3D views respectively, which were rotated to the standard lateral sacral views, pelvic outlet and inlet views. Then the location and course of the S1, S2 sacral nerve root tunnel on each view were observed. RESULTS: The sacral nerve root tunnel started from the cranial end and anterior aspect of the vertebral canal of the same segment and ended up to the anterior sacral foramen with a direction from cranial-posterior-medial to caudal-anterior-lateral. The tunnel had a lower density than the iliac cortex and greater sciatic notch on the pelvic X-rays,especially on the standard sacral lateral view, on which it showed up as a disrupted are line and required more careful recognition. CONCLUSION: It can prevent the iliosacral screw from penetrating the sacral nerve root tunnel and vertebral canal when recognizing the anterior aspect of sacral nerve root tunnel and choosing it as the caudal-posterior boundary of the "safe zone" on the standard lateral sacral view.

[Classification of upper sacral segment based on continuous axial pelvic computed tomography scan].

OBJECTIVES: To introduce a classification system of upper sacral segment and its significance based on the continuous pelvic axial computed tomography scan. METHODS: The whole pelvis 2.0 mm thick axial scan images of 127 cases were observed, the sacroiliac screw channel of S1 were measured, according to the size of the transverse screw channel the upper sacral segment were classified. Such as transverse screw channel existed and in at least 4 layer scan images its width was > 7.3 mm, it was defined as sacral segment of the normal type. Such as transverse screw channel existed and its maximum width was 7.3 mm or less on scanning level, it was defined as a transitional. Such as transverse channel did not exist, or its width on all scanning level was 0 mm or less, it was defined as dysplastic. Various cases,percentage, and the average of the transverse screw channel were calculated. RESULTS: There were 58 normal (45.7%),42 transitional (33.1%), and 27 dysplastic (21.2%) upper sacral segments with an averaged width of the tansverse screw channel of 13.9 mm, 5.2 mm, and 0.9 mm, respectively. Each specimen could be defined as one of the three types of upper sacral segment without exceptions. CONCLUSION: It is possible to insert a transverse iliosacral screw into a normal upper sacral segment when indicated because of the capacious transverse screw channel. The transverse iliosacral screw placement into the transitional and dysplastic upper sacral segments was contraindicated because of the limited or none transverse screw channel. The transitional upper sacral segment was superior to the dysplastic segment due to its starting point location restriction on the true lateral sacral view.