Biotemplated Fe/La-co-doped TiO2 for photocatalytic depth treatment of compressed leachate from refuse transfer station.

Compressed leachate is a contaminated liquid containing various organic and inorganic pollutants produced in municipal refuse transfer stations, which pollute soil and groundwater, posing serious risks to the environment and human health. The Environmental Technology Co., Ltd. (Shenzhen, Guangdong Province, South China) treated compressed leachate obtained from a refuse transfer station. The chemical oxygen demand (COD) (641.2 mg/L) of treated compressed leachate did not meet the wastewater quality standards in China for discharge into municipal sewers (COD ≤ 500 mg/L) and the company's design discharge requirements (COD ≤ 400 mg/L). Therefore, their further in-depth treatment is necessary. To this end, waste tobacco leaves were used as the biotemplate herein, and Fe/La-co-doped TiO2 (xFe,yLa)-TTiO2(g) was synthesized using a solvothermal-assisted biotemplating method. The photocatalytic depth treatment of compressed leachate was performed under simulated solar light using the prepared catalysts. After (3Fe,3La)-TTiO2(g) treatment, the COD of the leachate decreased from 641.2 to 280.1 mg/L, and the COD removal rate was 1.2, 1.1, and 1.6 times higher than that of pure Fe-doped, La-doped and non-biological template TiO2, respectively. Characterization confirmed that the biological template endowed the catalyst with a unique morphology and high specific surface area. Its rich activity sites are conducive to enhancing the adsorption capacity of pollutants and providing an ideal place for photocatalytic reactions. Co-doping with iron and lanthanum ions altered the band structure of TiO2 and promoted the interconversion of Fe3+/Fe2+ and La3+/La2+ during photocatalysis. First-principles density functional theory simulations demonstrated that co-doping Fe and La in TiO2 created impurity levels that facilitated the transfer of photogenerated electrons. This study provides a new purification pathway for the depth treatment of compressed leachate.

Interface Engineering of PdPt Ultrafine Ethanol Electro-Oxidation Nanocatalysts by Bacterial Soluble Extracellular Polymeric Substances (s-EPS) to Break through Sabatier Principle.

Unsatisfactory performance of ethanol oxidation reaction (EOR) catalysts hinders the application of direct ethanol fuel cells (DEFCs), while traditional alloy catalysts (like PdPt) is cursed by Sabatier principle due to countable active site types. However, bacterial soluble extracellular polymeric substances (s-EPS) owning abundent functional groups may help breacking through it by contrusting different active sites on PdPt and inducing them to play synergy effect, which is called interface engineering. Using s-EPS to engineer catalysts is more green and consumes lower energy compared to chemical reagents. Herein, PdPt alloy nanoparticles (≈2.1 nm) are successfully in situ synthesized by/on s-EPS of Bacillus megaterium, an ex-holotype. Tryptophan residuals are proved as the main reductant. In EOR, PdPt@s-EPS shows higher activity (3.89 mA cm-2) than Pd@s-EPS, Pt@s-EPS, Pt/C and most reported akin catalysts. Its stability and durability are excellent, too. DFT modelling further demonstrates that, interface engineering by s-EPS breaks through Sabatier principle, by the synergy of diverse sites owning different degrees of d-p orbital hybridization. This work not only makes DEFCs closer to practice, but provides a facile and green strategy to design more catalysts.

Carbon nanotube supported cobalt nickel sulphide nano-catalyst for degradation of chloroquine phosphate with peroxymonosulphate.

Carbon nanotubes supported cobalt nickel sulphide nanoparticles (nano-NiCo2S4@CNTs) were successfully prepared by a hydrothermal method as heterogeneous catalyst which can be used as an activator of peroxymonosulphate (PMS) for the degradation of chloroquine phosphate (CQP). Based on characterisation techniques, the prepared catalyst has excellent surface properties and structural stability. When different concentrations of CQP were treated with 0.2 g/L nano-NiCo2S4@CNTs and 1.0 mM PMS, the highest degradation rate could reach 99.86% after 30 min. Under the interference of pH, common anions and humic acid in the water environment, the reaction system can still achieve high degradation efficiency, showing excellent anti-interference ability and practical applicability. Furthermore, in the nano-NiCo2S4@CNTs/PMS system, according to the identification results of reactive oxygen species, the free radical and non-free radical pathway are responsible for the degradation of CQP, and the PMS mechanism activation was comprehensively proposed. Twelve intermediate products were detected in the degradation process, and the possible degradation pathways of CQP were proposed. This toxicity analysis demonstrates that the intermediate products formed during CQP degradation pose lower environmental risks compared to the original pollutant. In addition, after using the catalyst four cycles, the removal efficiency of CQP remains above 80%, indicating the excellent reusability and low metal ion leaching characteristics. Therefore, the nano-NiCo2S4@CNTs synthesised in this research has broad application prospects in activating PMS for wastewater treatment.

A Novel One-Step Hydrothermal Preparation of Ru/SnxTi1-xO2 Diesel Oxidation Catalysts and its Low-Temperature Performance.

The rutile SnxTi1-xO2 (x = 0, 0.33, 0.5, 0.67, 1) solid solution was synthesized by a one-step hydrothermal method, in which tetrabutyl titanate and Tin (IV) chloride pentahydrate were used as raw materials. A series of Ru/SnxTi1-xO2 were then prepared by the impregnation process in RuCl3 to investigate the performance and stability of CO and C3H8 oxidation. These catalysts were characterized through XRD, N2 adsorption-desorption, FT-IR, TEM, XPS, H2-TPR, and O2-TPD techniques. The effect of Sn/Ti molar ratio and hydrothermal condition on the low-temperature catalytic oxidized performance and stability of Ru/SnxTi1-xO2 were investigated. The results indicated that Ru/Sn0.67Ti0.33O2 catalyst showed an excellent activity and stability at low temperatures. The CO conversion reached 50% at 180 °C and 90% at 240 °C. Besides, the C3H8 conversion reached 50% at 320 °C, the complete conversion of C3H8 realized at 500 °C, and no deactivation occurs after 12 h of catalytic reaction. The excellent low-temperature activity and stability of the Ru/Sn0.67Ti0.33O2 were attributed to the following factors. Firstly, XRD results showed that Sn4+ was successfully introduced into the lattice of TiO2 to replace Ti4+ forming a homogeneous solid solution (containing -Sn4+-O-Ti4+- species), which was consistent with TEM and N2 adsorption-desorption results. The introduction of Sn could suppress the growth of anatase crystal and promote the formation of rutile phase, and this phase transition was helpful to improve the low-temperature activity of the catalysts. Secondly, TEM images showed that ultrafine Ru nanoparticles (~ 5 nm) were dispersed on Sn0.67Ti0.33O2 support, suggesting that the formation of SnxTi1-xO2 solid solution was beneficial to the dispersion of Ru particles.