RESUMO
Dye/salt separation in textile wastewater is of great importance. Membrane filtration technology is an environmentally friendly and effective approach to solve this issue. In this study, a thin-film composite membrane with a tannic acid (TA)-modified carboxylic multiwalled carbon nanotube (MWCNT) interlayer (M-TA) was prepared by interfacial polymerization with amino-functionalized graphene quantum dots (NGQDs) acting as aqueous monomers. The addition of the M-TA interlayer favored the formation of a thinner, more hydrophilic, and smoother selective skin layer for the composite membrane. The pure water permeability of the M-TA-NGQDs membrane was â¼9.32 L m-2 h-1 bar-1, which was higher than that of the NGQDs membrane without the interlayer. Meanwhile, the M-TA-NGQDs membrane presented better methyl orange (MO) rejection (97.79%) than the NGQDs membrane (87.51%). The optimal M-TA-NGQDs membrane exhibited excellent dye rejection (Congo red (CR): 99.61%; brilliant green (BG): 96.04%) and low salt rejection (NaCl < 15%). Noticeably, the M-TA-NGQDs membrane displayed effective selective separation performance (CR and BG > 99%) for dye/NaCl mixed solutions even at a high NaCl concentration of 50,000 mg/L. Furthermore, the M-TA-NGQDs membrane presented high water permeability recovery ratio values (91.02-98.20%). Importantly, the M-TA-NGQDs membrane showed excellent chemical stability (acid/alkali resistance). Generally, the fabricated M-TA-NGQDs membrane exhibited a great prospect for applications in dye wastewater treatment and water recycling, especially for the effective selective separation of dye/salt mixtures for high-salinity textile dyeing wastewater.
RESUMO
For better sustainable resource recovery and elevating the separation efficiency of dye/salt mixture, it is essential to develop an appropriate nanofiltration membrane for the treatment of textile dyeing wastewater containing relatively smaller molecule dyes. In this work, a novel composite polyamide-polyester nanofiltration membrane was fabricated by tailoring amino functionalized quantum dots (NGQDs) and ß-cyclodextrin (CD). An in-situ interfacial polymerization occurred between the synthesized NGQDs-CD and trimesoyl chloride (TMC) on the modified multi-carbon nanotubes (MWCNTs) substrate. The incorporation of NGQDs significantly elevated the rejection (increased by â¼ 45.08%) of the resultant membrane for small molecular dye (Methyl orange, MO) compared to the pristine CD membrane at low pressure (1.5 bar). The newly developed NGQDs-CD-MWCNTs membrane exhibited enhanced water permeability without compromising the dye rejection compared to the pure NGQDs membrane. The improved performance of the membrane was primarily attributed to the synergistic effect of functionalized NGQDs and the special hollow-bowl structure of CD. The optimal NGQDs-CD-MWCNTs-5 membrane expressed pure water permeability of 12.35 L m-2h-1 bar-1 at the pressure of 1.5 bar. Noteworthily, the NGQDs-CD-MWCNTs-5 membrane not only showed high rejection for the larger molecular dye of Congo Red (CR, 99.50%) but also for the smaller molecular dye of MO (96.01%) and Brilliant Green (BG, 95.60%) with the permeability of 8.81, 11.40, and 6.37 L m-2h-1 bar-1, respectively at low pressure (1.5 bar). The rejection of inorganic salts by the NGQDs-CD-MWCNTs-5 membrane was 17.20% for sodium chloride (NaCl), 14.30% for magnesium chloride (MgCl2), 24.63% for magnesium sulfate (MgSO4), and 54.58% for sodium sulfate (Na2SO4), respectively. The great rejection of dyes remained in the dye/salt binary mixed system (higher than 99% for BG and CR, <21% for NaCl). Importantly, the NGQDs-CD-MWCNTs-5 membrane exhibited favorable antifouling performance and potential good operation stability performance. Consequently, the fabricated NGQDs-CD-MWCNTs-5 membrane suggested a prospective application for the reuse of salts and water in textile wastewater treatment owing to the effective selective separation performance.
