Effects of three-dimensional femur and tibia postures on the parameters of standing long-leg radiographs for osteoarthritic knees in elderly female subjects.

BACKGROUND: Long-leg frontal radiographs of the lower extremities are used to assess knee osteoarthritis. Given the three-dimensional (3D) nature of alignment changes in osteoarthritis, postural alterations in the femur and tibia extend beyond the coronal plane (in-plane) to include the transverse and sagittal planes (out-of-plane). This study investigates the impact of these out-of-plane factors on in-plane knee alignment parameters observed in frontal radiographs. METHODS: A total of 97 osteoarthritic knees in women were examined. Using a 3D-to-two-dimensional (2D) image matching technique, we evaluated the 3D postures of the femur and tibia in the standing position as viewed from frontal radiographs in the world coordinate system. Statistical analyses were conducted to explore associations between these 3D postures and 2D alignment parameters obtained from frontal radiographs under identical conditions. FINDINGS: The femur exhibited a medial inclination of 2.7°, a posterior inclination of 3.9°, and an internal rotation of 4.2°, whereas the tibia showed a lateral inclination of 6.4°, an anterior inclination of 6.7°, and an internal rotation of 6.7°. Both coronal and rotational postures of femur and tibia influenced the hip-knee-ankle angle, mechanical axis percentage, and medial proximal tibial angle. However, only coronal factors of tibia impacted tibial joint line obliquity relative to the floor. INTERPRETATION: Attention should be paid to the potential impact of the out-of-plane postures of the femur and tibia on parameters assessed in plain frontal radiographs of the lower extremities.

Medial cortical bone thickness of the tibial diaphysis in osteoarthritis is related to lower extremity alignment and tibial morphology.

BACKGROUND: The purpose of this study was to clarify (1) the differences in cortical bone thickness (CBT) of the tibial diaphysis between healthy and osteoarthritic knees and (2) the influences of the femorotibial angle (FTA) and inclination of the medial compartment of the proximal tibia (MCT) on tibial CBT. METHODS: The study assessed 60 subjects with varus knee osteoarthritis (OA) (22 males and 38 females; mean age, 74 ± 7 years) and 53 healthy elderly subjects (28 males and 25 females; mean age, 70 ± 6 years). Three-dimensional estimated CBT of the tibial diaphysis was automatically calculated for 2752-11,296 points using high-resolution measurements from CT. The standardized CBT was assessed in 24 regions by combining six heights and four areas. Additionally, the association between the CBT, each FTA, and MCT inclination was investigated. RESULTS: The OA group showed a thicker CBT in the medial areas than in the lateral areas of the proximal tibia, while the healthy group had a thicker lateral CBT. The medial-to-lateral ratio of the proximal tibia was significantly higher in the OA group than in the healthy group. The proximal-medial CBT correlated with FTA and MCT inclinations in the OA group. CONCLUSIONS: This study demonstrated that varus osteoarthritic knees showed a different trend of proximal-medial CBT with associations in FTA and MCT inclination from healthy knees, possibly due to medial load concentration.

Mobile medial pivot (lateral slide)-type total knee arthroplasty exhibited different motion patterns between under anaesthesia and weight-bearing condition.

PURPOSE: Total knee arthroplasty (TKA), which has medial pivot and mobile-bearing mechanisms, has been developed and clinically used. However, the in vivo dynamic kinematics of the mobile medial pivot-type TKA (MMPTKA) is unclear. This study analysed the in vivo kinematics of MMPTKA in weight-bearing and nonweight-bearing conditions. METHODS: The study included 10 knees that underwent primary TKA using MMPTKA. After TKA, lateral view radiographs of the knee in full extension, 90° of flexion and passive full flexion were taken under general anaesthesia in the nonweight-bearing condition. At least 6 months postoperatively, knee motion during squatting from a weight-bearing standing position was observed using a flat-panel detector and analysed using the three-dimensional-to-two-dimensional image registration technique. RESULTS: Under anaesthesia: in passive full flexion, the anteroposterior (AP) locations of the femoral component's medial and lateral distal points were 10.2 and 16.0 mm posterior, and the rotational angles of the femoral component's X-axis (FCX) and insert were 8.1° external rotation and 18.5° internal rotation to full extension, respectively. Squatting: the AP translations of the femoral component's medial and lateral most distal points were 2.2 and 6.4 mm, and the rotational angles of the FCX and insert were 5.7° and 1.6° external rotation, respectively. Significant differences were observed in the AP translation of the femoral component's medial and lateral most distal points and changes in the insert's rotational angle when comparing under anaesthesia and squatting. CONCLUSIONS: The kinematics of the insert in MMPTKA was significantly influenced by loading and muscle contraction. The femoral component exhibited substantial external rotation and posterior translation under anaesthesia, which may contribute to achieving an optimal range of motion. The insert remained relatively stable during squatting and minimal rotation was observed, indicating good stability. MMPTKA was expected to demonstrate rational kinematics by incorporating mobile and medial pivot mechanisms. LEVEL OF EVIDENCE: Level IV, prospective biomechanical case series study.

Varus/valgus stability in imageless robotic-assisted total knee arthroplasty applying three-dimensional assessment of varus/valgus stress X-rays.

BACKGROUND: The postoperative varus/valgus stability assessment in stress X-rays has been established as an evaluation index. However, it is performed by the two-dimensional (2D) method rather than the three-dimensional (3D) method. OBJECTIVE: This study aimed to identify the precision and reproducibility of measuring varus/valgus stress X-rays three-dimensionally and to examine varus/valgus stability under anesthesia in imageless robotic assisted total knee arthroplasty (rTKA). METHODS: This prospective study analyzed 52 consecutive rTKAs (five males, 67 ± 5.3 years; 47 females, 74 ± 5.9 years). Postoperative varus/valgus stress X-rays in knee extension under anesthesia at manual maximum stress were three-dimensionally assessed by 2D-3D image matching technique using the 3D bone and component models. Varus/valgus angle between components (VV angle) in no stress, valgus stress, varus stress, medial joint opening (MJO), and lateral joint opening (LJO) were evaluated, clarifying this method's precision and reproducibility and valgus/varus stability. RESULTS: All parameters' precision and reproducibility had <1° mean differences and high intra- and inter-class correlation coefficients. Bland-Altman plots showed no fixed and proportional bias. Non-stress VV angle, valgus VV angle, varus VV angle, MJO, and LJO were 3.6 ± 1.2°, 1.0 ± 1.4°, 7.1 ± 1.9°, 1.5 ± 1.0 mm, and 2.8 ± 2.7 mm, respectively. CONCLUSION: This prospective study demonstrated that (1) the three-dimensional measurement method provided sufficient precision and reproducibility, and (2) the rTKAs could achieve good postoperative varus/valgus stability with a small standard deviation.

The morphology of the femoral posterior condyle affects the external rotation of the femur.

PURPOSE: The purpose of this study was to identify factors related to the external rotation of the femur during knee flexion. METHODS: Three-dimensional (3D) digital models of the femur and tibia were reconstructed from computed tomography images of 41 healthy Japanese subjects. Thirteen parameters related to femoral and tibial morphology and alignment of the lower extremities were evaluated, including the inclination angle of the posterior lateral and medial femoral condyles, the ratio of the medial and lateral posterior condyle radii approximated as spheres, the spherical condylar angle, the posterior condylar angle, the medial and lateral posterior tibial slope, the difference of medial and lateral posterior tibial slope, the tibiofemoral rotation angle, the 3D femorotibial angle, the 3D hip-knee-ankle angle, and the passing point of the weight-bearing line (medial-lateral and anterior-posterior). The rotation angle of the femur relative to the tibia during squatting was investigated using a 3D to 2D image matching technique and the relationships with the13 parameters were determined. RESULTS: The femur externally rotated substantially up to 20° of knee flexion (9.2° ± 3.7°) and gently rotated after 20° of knee flexion (12.8° ± 6.2°). The external rotation angle at 20°-120° of knee flexion correlated with the spherical condylar angle, the tibiofemoral rotation angle and the inclination angle of the posterior medial condyles (correlation coefficient; 0.506, 0.364, 0.337, respectively). CONCLUSION: The parameter that was most related to the external rotation of the femur during knee flexion was the spherical condylar angle. LEVEL OF EVIDENCE: IV.

The Matsudai Knee Osteoarthritis Survey showed the longitudinal changes of knee phenotypes in alignment and structure during 23-28 years.

PURPOSE: The longitudinal changes in alignment and structure, including the joint line and cortical bone thickness (CBT) of the femur and tibia, and knee phenotype in patients with knee osteoarthritis (OA) remain unknown. The aim of this retrospective study was to clarify the longitudinal changes in matched healthy subjects. METHODS: The follow-up Matsudai Knee Osteoarthritis Survey was administered between 23 and 28 years. This study included 285 healthy knees from 235 females with an average age of 53 ± 6 years at baseline. The non-OA individuals, with an average age of 79 ± 4 years, were divided into three groups at baseline according to their follow-up radiographic results [the non-OA (n = 52), early OA (n = 131), and advanced OA groups (n = 102)]. Changes in alignment, joint line, CBT, and knee phenotype were assessed at baseline and at follow-up using standing anteroposterior radiographs. RESULTS: This study showed significant varus changes in the alignment (p < 0.001) and tibial and femoral joint line parameters (p < 0.05) in the OA group. Decreased CBT and increased mediolateral CBT ratios were observed in all groups (p < 0.001). The knee phenotypes in the OA groups were changed to varus angles, especially in the alignment and tibial joint line. CONCLUSIONS: The longitudinal changes of knee phenotypes in alignment and structure (CBT and joint line) from baseline to follow-up were shown in the OA groups. In addition, alignment and tibial structural factors at baseline are useful in predicting the incidence of knee OA in daily practice. LEVELS OF EVIDENCE: III.

Normal coronal kinematics of dynamic alignment and bony positions relative to the ground in three-dimensional motion analysis during gait: A preliminary study.

BACKGROUND: During gait, healthy knee coronal kinematics of each bony axis and lower extremity alignment are important because they could be useful as reference data for several surgeries and provide clarification of the etiology of diseases around the knee in healthy participants; however, it remains unknown. OBJECTIVE: The objective of this study was to clarify the kinematics of lower extremity alignment and the bony axes relative to the ground during gait, focused on the coronal plane, in healthy individuals by applying our unique three-dimensional (3D) motion analysis. METHODS: The study included 21 healthy individuals, including 9 healthy females and 12 healthy males with an average age of 36 ± 17 years. Knee kinematics were calculated in a gait analysis by combining the data from a motion-capture system and a 3D lower-extremity alignment assessment system on biplanar long-leg radiographs by using a 3D-2D registration technique. The main kinematic parameters were the dynamic position change relative to the ground, applying the femoral anatomical axis (FAA), tibial anatomical axis (TAA), and dynamic alignment in the coronal plane during the stance phase of gait. RESULTS: The average changes in FAA, TAA, and dynamic varus alignment were 3.7° ± 1.2°, 3.5° ± 0.8°, and 3.0° ± 1.2°, respectively. The TAA tilted laterally during the loading response and a plateau area appeared afterwards; the FAA gradually inclined laterally until the terminal stance phase, and the dynamic alignment showed varus angular change during the loading response. CONCLUSIONS: The tibia and femur were found to change approximately 2-5° of the position of the bony axes relative to the ground. In terms of clinical relevance, our findings can be used to clarify the etiology of diseases around the knee joint and as reference data for surgeries.

Variability of functional knee phenotype for coronal alignment in advanced varus knee osteoarthritis in the Japanese population.

PURPOSE: New concept of functional knee phenotypes in Caucasians demonstrated the variability of coronal alignment in knee osteoarthritis (OA), but it remains unclear in Japanese. This study aims to analyze the knee phenotype in advanced varus knee OA for Japanese. In addition, the ethnical difference is discussed. METHODS: This study analyzed 879 knees involving 186 males (74 years) and 693 females (74 years). The knee phenotypes were assessed by the definition in Hirschmann's group. The hip-knee-ankle angle (HKA), femoral mechanical angle (FMA) and tibial mechanical angle (TMA) were assessed in CT data according to the coordinate system. The neutral angle was 180° in HKA, 93° in FMA and 87° in TMA. The smaller angle means larger varus angles. RESULTS: The average angle (males, females) of the HKA (170.9 ± 4.3°, 169.4 ± 5.0°), FMA (91.5 ± 2.7°, 90.6 ± 3.0°), and TMA (82.4 ± 3.6°, 82.7 ± 3.7°) demonstrated varus angles with the sex difference (HKA, p < 0.001; FMA, p = 0.001). The phenotypes were 73 types in males and 150 types in females with a mild correlation between the HKA and the FMA or TMA. In 61.3% of males and 52.2% of females, the TMA was greater than the FMA, while the FMA was greater in 16.7% of males and 23.1% of females. CONCLUSION: There were many functional knee phenotypes with sex differences for advanced varus knee OA in Japanese, showing ethnical differences of larger varus angles compared to those for Caucasians in the previous report. LEVEL OF EVIDENCE: IV.

Biomechanical effect of fibular osteotomy on the knee joint in high tibial osteotomy: A cadaveric study.

BACKGROUND: Closed-wedge high tibial osteotomy (CWHTO) with a fibular osteotomy (FO) causes medial joint space widening in the knee. However, the effect of FO on the joint space width remains unclear. OBJECTIVE: This study aimed to examine the effect of FO on the knee in HTO. METHODS: A compression load test was performed on two amputated human limbs under four conditions: (1) normal (without any osteotomy), (2) open-wedge HTO (OWHTO), (3) OWHTO with FO, and (4) CWHTO. The contact area of the femoral and tibial cartilages and the medial and lateral joint space widths in each condition were evaluated using a motion capture system with computed tomography (CT) and magnetic resonance imaging (MRI) data. RESULTS: The contact area increased on the lateral side after OWHTO, which increased more on the lateral side with a concomitant decrease on the medial side in both subjects when FO was added to OWHTO. An increase in the medial joint space width and a decrease on the lateral side were seen in both OWHTO with FO and CWHTO. CONCLUSIONS: The contact area and joint space widths are affected by the FO, and the effect is more pronounced than the way of HTO (OWHTO or CWHTO).

Mobile medial pivot (lateral slide) type total knee arthroplasty exhibits a medial pivot pattern: three-dimensional motion analysis using cadaveric knees.

PURPOSE: The purpose of this study was to analyze the dynamic kinematics of the mobile medial pivot-type total knee arthroplasty (MMPTKA) using the three-dimensional (3D)-to-2D registration technique. METHODS: Cadaveric knees from five humans were used. Computed tomography of the lower limb and preoperative 3D planning for MMPTKA were performed. After performing TKA, passive motion of the knee was observed from a fully extended position to maximum flexion using a flat panel detector. The following parameters were determined: (1) anteroposterior (AP) translations of the medial and lateral most distal points (estimated contact point) of the femoral component, (2) rotational femoral component's X-axis (FCX) angle, and (3) rotational insert angle. Paired t-tests were used to analyze differences in the AP translation between the medial and lateral most distal points of the femoral component as well as differences in the changes in the rotational angle between the FCX and X-axis of the insert on the tibial component's axial plane. RESULTS: The AP translations of the femoral component's medial and lateral most distal points were 8.4 ± 2.5 and 13.6 ± 3.3 mm, respectively (p = 0.001). The rotational angles of the FCX and insert were 10.7° ± 4.9° external rotation and 8.9° ± 4.1° internal rotation, respectively (p = 0.004). CONCLUSIONS: The posterior translation of the lateral side of the femoral component was greater than that of the medial in all cases. Hence, a medial pivot pattern was identified. The femoral component exhibited external rotation throughout knee flexion in all subjects, whereas the mobile insert exhibited internal rotation (opposite pattern relative to the femoral component). This study provides valuable kinematical information of MMPTKA that has not been clear yet.

The coronal inclination of the medial tibial plateau affects coronal gait kinematics for varus osteoarthritic knees.

PURPOSE: This study aims to (1) measure the kinematics of lower extremity alignment and the bony position relative to the ground during walking, focusing on the coronal plane, and (2) determine the correlation between the kinematics and coronal inclination of the medial tibial plateau (coronal inclination) for healthy and varus knee osteoarthritis (OA). METHODS: In this study, 43 women (non-OA, 9 knees; early OA, 13 knees; advanced OA, 21 knees; mean age 58 ± 17 years) were examined. The knee phenotypes in varus knee OA were varied. Three-dimensional (3D) knee kinematics were calculated in gait analysis by combining the motion capture system and the 3D lower extremity alignment assessment system via biplanar long-leg X-rays, applying the 3D-2D registration technique. The main parameters were the kinematics of the bony axes relative to the ground in the coronal plane during the stance phase of the gait. The differences in overall kinematics were assessed using repeated measures ANOVA with Tukey's post hoc test. The association between kinematic parameters and coronal inclination was evaluated by multiple linear regression after univariate analysis. RESULTS: The tibia tilted laterally during the loading response, and a plateau area subsequently appeared until the terminal stance phase, whereas the femur slowly tilted laterally until the terminal stance phase. The dynamic alignment showed a relatively large varus angular change during the loading response in all groups. The trend of motion was similar among all groups (p = n.s.), although to varying degrees. The coronal inclination was the more dominant factor than the Kellgren-Lawrence (K-L) grades (ß = - 0.423, p = 0.005) when the change in dynamic alignment was determined. CONCLUSIONS: The TAA plateau area after the loading response implies that the tibial articular surface may become horizontal. The femur slowly tilted laterally until the terminal stance phase in response to the tibial motion. Consequently, the dynamic alignment showed a varus angular change, in which coronal MCT was more involved than K-L grades.

Postoperative femoral anteroposterior position while standing correlates with the posterior tibial slope and posterior femoral condylar offset in medial pivot total knee arthroplasty.

BACKGROUND: After total knee arthroplasty (TKA), the femur tends to be located posteriorly under weight-bearing (WB) conditions, and a paradoxical femoral anterior motion occurs, leading to joint instability. OBJECTIVE: We aimed to clarify factors which affect the postoperative femoral anteroposterior position relative to the tibia under WB conditions (A-P position) in medial pivot (MP) TKA. METHODS: Among 126 knees (81 women) with primary TKA using MP prosthesis for varus osteoarthritic knees, 70 knees had cruciate-retaining inserts (CR) with the reduced conformity and 56 knees had cruciate-substituting inserts (CS) with the full conformity. Using the three-dimensional (3D) assessment system, the associations between the A-P position and the factors including pre- and postoperative lower extremity alignment, component positions, and posterior femoral condylar offset (PCO), were assessed regarding the type of inserts. RESULTS: Significant correlations were seen between the A-P position and posterior tibial slope (PTS), medial PCO, and lateral PCO. Regarding the difference between the two inserts, the PTS, medial PCO, and lateral PCO significantly correlated with the A-P position in the CR, but only the PTS correlated in the CS. CONCLUSIONS: The increased PTS and decreased PCO were the dominant factors for the A-P position in MP TKA.

The medial inclination of the proximal tibia is associated with the external knee adduction moment in advanced varus knee osteoarthritis.

PURPOSE: Whether the inclined articular surface on the medial proximal tibia and the external knee adduction moment (KAM) correlate remains unclear. The hypothesis was that a steeper inclined articular surface correlated with a larger KAM in advanced knee osteoarthritis (OA). METHODS: A total of 44 females (non-OA, 9 knees; early OA, 14 knees; advanced OA, 21 knees; mean age, 58 ± 16 years) were examined. Three-dimensional (3D) assessment was used on biplanar long-leg radiographs and 3D bone models using a 3D to 2D image registration technique. The approximation plane in the proximal tibia was determined using the least-square method. The joint moments were mathematically calculated in a gait analysis, applying a motion capture system and force plates. The main evaluation parameters were the femorotibial angle (FTA), the coronal inclination of the approximation plane in the medial proximal tibia (coronal inclination), and internal knee joint moments. The KAM means the external moments balanced with the internal knee abduction moments. RESULTS: The advanced OA showed a larger internal abduction moment (p = 0.017) at the loading response than the other groups. The larger FTA and steeper coronal inclination correlated with the larger internal abduction moment (FTA, p < 0.001; coronal inclination, p = 0.003) at the loading response. CONCLUSIONS: As the clinical relevance, the association among the coronal inclination of the medial proximal tibia, lower extremity alignment, and KAM is one of the key factors to help better understand the etiology of knee OA. LEVEL OF EVIDENCE: III.

The three-dimensional quadriceps vector is most parallel to the spherical axis in Japanese varus osteoarthritic knees.

BACKGROUND: The quadriceps femoris may be a reliable reference to proper alignment in total knee arthroplasty (TKA). We previously showed the quadriceps vector (QV) to be the most parallel to the spherical axis (SA-center hip to center medial condyle) for healthy knees. The purpose of this study was to determine whether the QV is the most parallel to the SA in knees with varus osteoarthritis (OA). METHODS: CT imaging for 35 varus OA and 40 healthy Japanese knees was used to construct 3D models of the femur, patella and each quadriceps component for each subject. The QV was calculated using principal component analysis for direction and was compared with the relationship of the QV to the measurement axes of the lower extremity, including the anatomical, mechanical and spherical axes. RESULTS: The direction of the QV for the OA knee group was different from that for the healthy knee group in 3D space (medio-lateral direction: women, p = 0.532, men, p = 0.540; antero-posterior direction: women, p = 0.141, men, p < 0.001). However, the angle of the QV in relation to measurement axes in the coronal plane was closest to the SA in both groups (around 1°), with no difference between the groups (women, p = 0.382, men, p = 0.943). CONCLUSION: In the coronal plane, the SA most closely approximates the QV for both healthy and OA knees. The more posterior QV position in the 3D space may affect the patellofemoral joint.

Comparison of post-operative three-dimensional and two-dimensional evaluation of component position for total knee arthroplasty.

PURPOSE: The purpose of this study was to evaluate the post-operative three-dimensional (3D) femoral and tibial component positions in total knee arthroplasty (TKA) by the same co-ordinates' system as for pre-operative planning and to compare it with a two-dimensional (2D) evaluation. MATERIALS AND METHODS: Sixty-five primary TKAs due to osteoarthritis were included. A computed tomography (CT) scan of the femur and tibia was obtained and pre-operative 3D planning was performed. Then, 3D and 2D post-operative evaluations of the component positions were performed. KneeCAS (LEXI, Inc., Tokyo, Japan), a lower-extremity alignment assessment system, was used for the 3D post-operative evaluation. Standard short-knee radiographs were used for the 2D post-operative evaluation. Differences between the pre-operative planning and post-operative coronal and sagittal alignment of components were investigated and compared with the results of the 3D and 2D evaluations. RESULTS: According to the 3D evaluation, the difference between the pre-operative planning and actual post-operative sagittal alignment of the femoral component and the coronal and sagittal alignments of the tibial component were 2.6° ± 1.8°, 2.2° ± 1.8° and 3.2° ± 2.4°, respectively. Using the 2D evaluation, they were 1.9° ± 1.5°, 1.3° ± 1.2° and 1.8° ± 1.4°, making the difference in 3D evaluation significantly higher (p = 0.013, = 0.003 and < 0.001). For the sagittal alignment of the femoral component and the coronal and sagittal alignment of the tibial component, the outlier (> ± 3°) ratio for the 3D evaluation was also significantly higher than that of the 2D evaluation (p < 0.001, = 0.009 and < 0.001). CONCLUSIONS: The difference between the pre-operative planning and post-operative component alignment in the 3D evaluation is significantly higher than that of the 2D, even if the same cases have been evaluated. Two-dimensional evaluation may mask or underestimate the post-operative implant malposition. Three-dimensional evaluation using the same co-ordinates' system as for pre-operative planning is necessary to accurately evaluate the post-operative component position.

Influence of posterior tibial slope on three-dimensional femorotibial alignment under weight-bearing conditions in healthy Japanese elderly people.

BACKGROUND: Assessment of three-dimensional (3D) femorotibial alignment is essential for successful knee osteoarthritis treatment in the elderly. The complex morphology of the posterior tibial slope (PTS) might have an influence on sagittal and rotational alignment and the positional relationship between the femur and tibia in the anterior-posterior (AP) direction under weight-bearing conditions. OBJECTIVE: This study aimed to clarify the association between the PTS and 3D femorotibial alignment under weight-bearing conditions in healthy Japanese elderly individuals. METHODS: We investigated the 3D femorotibial alignment of 110 lower extremities of 55 healthy individuals (26 women, 29 men, mean age: 70 ± 6 years). Using our previously reported 3D-to-2D image registration technique, we evaluated the 3D hip-knee-ankle angle (3DHKA) in the sagittal plane, rotational alignment, and the distance between the femoral and tibial origins in the AP direction (tibial AP position) as femorotibial alignment parameters under weight-bearing conditions. We assessed the medial and lateral PTS and their angular difference (PTS difference) as PTS parameters. Stepwise multiple linear regression analysis was performed using PTS parameters and other possible confounders (age, sex, height, and weight) as the independent variables and femorotibial alignment parameters as the dependent variable. RESULTS: Weight (𝛽 = 0.393, p < 0.001) and lateral PTS (𝛽 = 0.298, p < 0.001) were the predictors associated with 3DHKA in the sagittal plane. Lateral PTS (𝛽 = 0.304, p = 0.001) was the only predictor associated with the tibial AP position. Sex (𝛽 = -0.282, p = 0.002) and PTS difference (𝛽 = -0.231, p = 0.012) were associated with rotational alignment. CONCLUSIONS: We found that a steeper lateral PTS resulted in a more flexed knee and anterior tibia. The PTS difference was positively correlated with tibial external rotation. Our data could be used as the standard reference for realignment surgery to ensure PTS is appropriately maintained.

Predictive factors for developing osteochondritis dissecans after surgery for discoid lateral meniscus are younger age and shorter meniscal width.

PURPOSE: This study aimed to identify the predictive factors for postoperative osteochondritis dissecans (OCD) in juvenile and adolescent knees with discoid lateral meniscus (DLM). METHODS: In total, 242 patients with symptomatic DLM who underwent surgery were identified. Inclusion criteria were set as follows: (1) age ≤ 17 years with an open growth plate, (2) follow-up magnetic resonance imaging, and (3) absence of preoperative OCD. Consequently, 52 patients were retrospectively investigated. Average age during surgery, body mass index (BMI), and follow-up duration were 12 years [95% confidence interval (CI) 11-13], 19.2 kg/m2 (95% CI 18.4-20.1), and 27.3 months (95% CI 20.9-33.7), respectively. Age, sex, sports activities, BMI, symptomatic OCD in other joints, postoperative rehabilitation, preoperative shift of DLM by Ahn's classification, surgical procedures (saucerization alone or with stabilization, and subtotal meniscectomy), and postoperative meniscal width were analyzed as possible predictive factors. RESULTS: Postoperatively, 42 patients without OCD and 10 with OCD were observed. In univariate analysis, younger age [odds ratio (OR) 1.5; p = 0.003], subtotal meniscectomy (OR 6.3; p = 0.027), and shorter meniscal width (OR 2.7; p = 0.005) were predictive factors for postoperative OCD. Multivariate analysis demonstrated that younger age (OR 1.6; p = 0.009) and shorter meniscal width (OR 1.5; p = 0.003) were predictive factors. CONCLUSIONS: To prevent postoperative OCD after DLM surgeries, achieving stabilization with adequate meniscal width is necessary for juvenile knees. LEVEL OF EVIDENCE: III.

The postoperative shorter meniscal width was the risk factor of lateral meniscal extrusion in the middle portion for juvenile and adolescent knees with discoid lateral meniscus.

PURPOSE: The study aim was to clarify the risk factors for postoperative meniscal extrusion in a middle portion in juvenile and adolescent knees with DLM. METHODS: Forty-six patients with symptomatic DLM who underwent surgery were retrospectively assessed. Inclusion criteria were set as follows: (1) aged ≤ 17 years with an open growth plate, (2) preoperative and postoperative follow-up MRI, and 3) reshaping surgeries comprising of saucerization alone or with meniscal repair. Average (95%CI) age during surgery, body mass index (BMI), and follow-up duration were 12 years (11-13), 19.9 kg/m2 (18.7-21.0), and 26.4 months (19.5-33.3), respectively. Age, sex, sports activities, BMI, postoperative rehabilitation, preoperative shift of DLM by Ahn's classification, surgical procedures, postoperative meniscal width of all portions, and meniscal healing were analyzed. RESULTS: Postoperatively, eight knees in the no-extrusion group and 38 knees in the extrusion group were observed. In the univariate logistic regression analysis, shorter meniscal width in a middle portion (OR = 1.580, p = 0.006), shorter minimum width of all portions (OR = 1.674, p = 0.024), and meniscal healing (OR = 0.160, p = 0.028) were the risk factors for meniscal extrusion in a middle portion. Multiple logistic regression analysis demonstrated that shorter meniscal width in a middle portion was the risk factor. CONCLUSIONS: As the clinical relevance, to prevent postoperative meniscal extrusion of the middle portion with DLM, surgeons are necessary to pay attention to maintain the adequate meniscal width for juvenile and adolescent knees. LEVEL OF EVIDENCE: III.

Cortical thickness of the tibial diaphysis reveals age- and sex-related characteristics between non-obese healthy young and elderly subjects depending on the tibial regions.

PURPOSE: This study aimed to evaluate the age- and sex-related characteristics in cortical thickness of the tibial diaphysis between non-obese healthy young and elderly subjects as reference data. METHODS: The study investigated 31 young subjects (12 men and 19 women; mean age, 25 ± 8 years) and 54 elderly subjects (29 men and 25 women; mean age, 70 ± 6 years). Three-dimensional estimated cortical thickness of the tibial diaphysis was automatically calculated for 5000-9000 measurement points using the high-resolution cortical thickness measurement from clinical computed tomography data. In 12 assessment regions created by combining three heights (proximal, central, and distal diaphysis) and four areas of the axial plane at 90° (medial, anterior, lateral, and posterior areas) in the tibial coordinate system, the standardized thickness was assessed using the tibial length. RESULTS: As structural characteristics, there were no differences in the medial and lateral thicknesses, while the anterior thickness was greater than the posterior thickness in all groups. The sex-related difference was not shown. As an age-related difference, elderly subjects showed greater or lesser cortical thickness than the young subjects, depending on the regions of the tibia. CONCLUSIONS: Cortical thickness was different depending on sex, age, and regions in the tibia. The results of this study are of clinical relevance as reference points to clarify the causes of various pathological conditions for diseases. LEVEL OF EVIDENCE: Level 3.