A computational analysis of potential aortic dilation induced by the hemodynamic effects of bicuspid aortic valve phenotypes.

BACKGROUND AND OBJECTIVES: The bicuspid aortic valve (BAV) is a major risk factor for the progression of aortic dilation (AD) because of the induced abnormal blood flow environment in aorta. The differences in the development of AD induced by BAV phenotypes remains unclear. Therefore, the objective of this study was to assess the potential locations of AD induced by different phenotypes of BAV. The different effects of opening orifice area and leaflet orientation on ascending aortic hemodynamics in Type-1 BAV was investigated by means of numerical simulation. METHODS: Finite element dynamic analysis was performed on tricuspid aortic valve (TAV) and BAV models to simulate the motion of the leaflets and obtain the geometrical characteristics of AV at peak systole as a reference, which were used for aortic models. Then, four sets of aortic fluid models were designed according to the leaflet fusion types [TAV; BAV (left-right-coronary cusp fusion, LR; right-non-coronary cusp fusion, RN; left-non-coronary cusp fusion, LN)], and the computational fluid dynamics method was applied to compare the hemodynamic differences within the aorta at peak systole. RESULTS: The maximum opening area of BAV was significantly reduced, resulting in alterations in aortic hemodynamics compared with TAV. The velocity streamlines were essentially parallel to the aortic wall in TAV. The average pressure and wall shear stress in aorta tend to be stable. In contrary, the eccentricity of BAV orifice jet resulted in high-velocity flow directed toward the ascending aorta (AA) wall and aortic arch for LR and LN; RN features an asymmetrical velocity distribution toward the outer bend of the middle AA, and eccentric flow tends to impact the distal AA. As the flow angle is associated with distinct flow impingement locations, different degrees of WSS and pressure concentration occur along the aortic wall from the AA to the aortic arch in three BAV types. CONCLUSIONS: The BAV morphotype affects the aortic hemodynamics, and the abnormal blood flow associated with BAV may play a role in AD. The different BAV phenotypes determine the direction of blood flow jet and change the expression of dilation. LR is likely to cause dilation of the tubular AA; RN results in dilation of the middle AA to proximal aortic arch; and LN causes an increased incidence of the tubular AA and the proximal aortic arch.

Synthesis of nickel nanoparticles supported on metal oxides using electroless plating: controlling the dispersion and size of nickel nanoparticles.

Nickel nanoparticles supported on metal oxides were prepared by a modified electroless nickel-plating method. The process and mechanism of electroless plating were studied by changing the active metal (Ag) loading, acidity, and surface area of metal oxides and were characterized by UV-vis spectroscopy, transmission electron microscopy, scanning electron microscopy, and H(2) chemisorption. The results showed that the dispersion of nickel nanoparticles was dependent on the interface reaction between the metal oxide and the plating solution or the active metal and the plating solution. The Ag loading and acidity of the metal oxide mainly affected the interface reaction to change the dispersion of nickel nanoparticles. The use of ultrasonic waves and microwaves and the change of solvents from water to ethylene glycol in the electroless plating could affect the dispersion and size of nickel nanoparticles.

Catalytic dechlorination of monochlorobenzene with a new type of nanoscale Ni(B)/Fe(B) bimetallic catalytic reductant.

A unique type of nanoscale Ni(B)/Fe(B) bimetallic catalytic reductant was prepared and used for dechlorination of monochlorobenzene (MCB). The sample Ni(B)/Fe(B) was synthesized by an electroless plating method, in which nanoscale Ni(B) was deposited on the surface of nanoscale Fe(B) synthesized by chemical reduction. The results suggest that the nanoscale Ni(B)/Fe(B) bimetallic catalytic reductant has higher dechlorination efficiency than Ni/Fe(B) catalytic reductant prepared by replacing Fe(B) with Ni(2+) in aqueous solution. The Ni content was found to be an important factor in catalytic dechlorination, with the dechlorination rate increasing with Ni content. The electroless plating method improve the efficiency of the Ni(2+) in the solution. Dechlorination takes place with the existence of nanoscale Ni(B)/Fe(B) bimetallic catalytic reductant via a pseudo-first-order reaction.

Low-temperature approach to synthesize iron nitride from amorphous iron.

Iron nitride was prepared by a nitridation reaction in NH 3 using amorphous iron as precursor. The precursor was prepared at ambient temperature through the process of reducing ferrous sulfate by potassium borohydride, followed by the nitridation at different temperatures. The nitridation reaction occurred at 548 K, and -Fe 2-3N was formed at 573 K. The reaction temperature was much lower than that using crystallized iron because of the characteristics of the amorphous materials. The existence of a small quantity of boron (1.6 wt.%) improved the stability of the amorphous precursor, which guaranteed an amorphous iron precursor at nitriding temperatures in excess of 548 K.

A simple synthesis route and characterisation of Co(3)Mo(3)C.

A simple, one-step thermal decomposition method for the preparation of Co(3)Mo(3)C is reported in this paper. In this novel synthesis route, a mixed-salt precursor, containing Co(CH(3)COO)(2) x 4H(2)O, (HMT)(2)(NH(4))(4)Mo(7)O(24) x 2H(2)O (HMT = hexamethylenetetramine), and excess HMT is directly decomposed to the bimetallic carbide under flowing argon at 1023 K. The role of HMT in the preparation process has been investigated and a detailed reaction mechanism is proposed based on the experimental results. The bimetallic carbide is characterised by X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, BET surface area measurement and X-ray photoelectron spectroscopy. Furthermore, the activity of the as-prepared Co(3)Mo(3)C is evaluated by a 3-methylpyridine hydrodenitrogenation (HDN) reaction. The catalyst produced from this method provides better reactivity compared to the Co(3)Mo(3)C catalyst prepared by the conventional temperature-programmed reduction method.

Surface selective deposition of Mo(IV) on Ni/TiO2 particles in aqueous solutions.

The selective depositions of MoS2 and MoO2 over Ni surfaces are demonstrated on Ni/TiO2 particles in a mild electroless deposition process. High-resolution transmission electron microscopy (HRTEM) images show the uniform distribution of 10-30 nm spherical and hemispherical Ni particles on TiO2 surface, and three to six layers of MoS2 on the surface of Ni particles. The as-prepared MoS2-Ni/TiO2 is used as a catalyst for the hydrodesulfurization (HDS) reaction of dibenzothiophene (DBT), and shows a significant increase over commercial catalysts in turnover frequencies as the result of unique distribution of active components in the binary catalyst. The selective material deposition is explained in the context of Ni catalyzed KBH4 decomposition, which produces strong reducing species responsible for the site selective deposition of Mo. The synthetic method can be potentially used to prepare bimetallic materials with similar nanostructures such as those of Mo-Co, Mo-Pd, and Mo-Rh.