Impacts of shipyard oil leakage on the PAHs and PCBs occurrence in Xiangshan Bay, China.

Here, we studied the shipyard impacts on the distribution of PAHs and PCBs in the semi-enclosed Xiangshan Bay, an important mariculture zone in China. The results showed that the shipyard caused a pollution plume for PAHs but not for PCBs. As characteristic pollutants of oil leakage, the PAHs had concentrations of up to 55.82 ng L-1 in the water, 2235.04 ng g-1 in suspended particulate matter (SPM), and 1489.60 ng g-1 in sediment. The PAHs in water and SPM were dominated by phenanthrene and pyrene that were mostly derived from lubricant and diesel, while those in sediments were dominated by the high-molecular-weight PAHs, such as indeno[1,2,3-c,d]pyrene. In contrast, the PCBs concentrations reached up to 10.17 ng L-1, 79.72 ng g-1, and 124.33 ng g-1 in the seawater, SPM, and sediment samples, respectively, and they did not show spatial patterns affected by the shipyard. Moreover, the health risk assessment indicated that the shipyard discharge caused a substantial PAHs ecological risk to the adjacent and downstream water environment. Therefore, point source discharge in semi-enclosed bays should be paid close attention to due to the strong pollutant transport effect.

Spatiotemporal variations in chromophoric dissolved organic matter (CDOM) in a mixed land-use river: Implications for surface water restoration.

A challenge for current surface water restoration and management in China is acquiring the source information for complex pollution scenarios in order to develop effective control strategies. As an important part of dissolved organic matter, chromophoric dissolved organic matter (CDOM) contains unique chemical signals related to various pollution sources. Spectral methods such as fluorescence excitation-emission matrices coupled with parallel factor analysis enable rapid and low-cost CDOM characterization for source tracking. In this study, a typical small-sized river flowing through mixed land-use regions in southeastern China, the Lujiang River, was investigated to determine the responses of CDOM to spatiotemporal factors. The effects of land-use patterns were reflected by the fluorescent components of terrestrial and sewage substances. A high and stable proportion of terrestrial-like components (C1 + C2) in each sampling period (i.e., March: 47.6 ± 5.7% and October: 44.3 ± 2.7%) indicated a high input of non-point source (NPS) pollution from both agriculture and urban areas. In addition, the difference in solar radiation intensity induced by climate and air quality changes was also reflected by variability in the photodegradation product component (C3) of terrestrial precursors between October (24.8 ± 2.6%) and March (4.5 ± 2.0%), suggesting that terrestrial components could be a sensitive indicator for NPS pollutant monitoring. Increased sewage impact in downstream regions was reflected by a spike in the tryptophan-like component (C4); temporal variations in C4 (paired t-Test, p < 0.005) also indicated that sewage substances were more prone to removal by microbial activity in warmer seasons. The dynamics of C4 could serve as a good indicator of sewage disposal performance. The results of this study demonstrate that CDOM data have important practical applications for existing water restoration campaigns in southeastern China, as well as substantial potential for routine water quality monitoring.

How biofilms affect the uptake and fate of hydrophobic organic compounds (HOCs) in microplastic: Insights from an In situ study of Xiangshan Bay, China.

Microplastic (MP) has been identified as an emerging vector that transports hydrophobic organic compounds (HOCs) across aquatic environments due to its hydrophobic surfaces and small size. However, it is also recognized that environmental factors affect MP's chemical vector effects and that attached biofilms could play a major role, although the specific mechanisms remain unclear. To explore this issue, an in situ experiment was conducted at Xiangshan Bay of southeastern China, and dynamics of HOCs (i.e., polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs)) and bacterial communities related to the model MP (i.e., PE fibers) were analyzed and compared. Through bacterial characterizations including the 16S rRNA approach, higher summer temperatures (31.4 ± 1.07 °C) were found to promote colonizing bacterial assemblages with larger biomasses, higher activity and more degrading bacteria than winter temperatures (13.3 ± 2.49 °C). Consequently, some sorbed pollutants underwent significant decline in the summer, and this decline was particularly the case for PAHs with low (2-3 rings) and median (4 rings) molecular weights such as phenanthrene (59.4 ± 1.6%), chrysene (70.6 ± 4.2%), fluoranthene (77.1 ± 13.3%) and benz[a]anthracene (71.5 ± 11.0%). In our winter test, however, most pollutants underwent a consistent increase throughout the 8-week exposure period. Moreover, more biorefractory pollutants including PCBs and high molecular weight (5-6 rings) PAHs accumulated regardless of bacterial characteristics. Two putative PAH-degrading bacteria appeared with high relative abundances during the summer test, i.e., family Rhodobacteraceae (18.6 ± 0.5%) and genus Sphingomicrobium (22.4 ± 3.6%), associated with drastic decreases in low (45.2 ± 0.4%) and median (66.0 ± 2.5%) molecular weight PAHs, respectively. Bacterial degradation effects of biofilms on PAHs are also supported by the correlative dynamics of salicylic acid, an important degradation intermediate of PAHs. The results of this study indicate that MP's HOC vector effects are essentially determined by interactions between attached pollutants and microbial assemblages, which are further related to bacterial activity and pollutant features. Further studies of biofilm effects on MP toxicity and on the metabolic pathways of MP-attached HOCs are required.

Assessment of microplastics derived from mariculture in Xiangshan Bay, China.

Mariculture activities including enclosure, raft and cage cultures employ a variety of plastic gear such as fishing nets, buoyant material and net cages. The plastic gear poses a potential source of microplastics to the coastal environment, but relevant data on the impacts of mariculture are still limited. To this end, a semi-enclosed narrow bay (i.e., Xiangshan Bay, China) with a long-term mariculture history was investigated to assess how mariculture activities affect microplastics in seawater and sediment. The results indicated that mariculture-derived microplastics accounted for approximately 55.7% and 36.8% of the microplastics in seawater and sediment, respectively. The average microplastic abundances of seawater and sediment were 8.9 ±â€¯4.7 (mean ±â€¯SD, n = 18) items/m3 seawater and 1739 ±â€¯2153 (n = 18) items/kg sediment, respectively. The types of mariculture-derived microplastics included polyethylene (PE) foam, PE nets, PE film, polypropylene (PP) rope, polystyrene (PS) foam and rubber. PE foam had the highest proportion (38.6%) in the seawater samples. High usage rates and the porous structure of PE foam led to the high abundance. The average microplastic sizes of seawater and sediment are 1.54 ±â€¯1.53 mm and 1.33 ±â€¯1.69 mm, respectively. The spatial variations in the abundance and size of microplastics implied that the mariculture-derived microplastics in Xiangshan Bay were transported along the Bay to the open sea. The results of this study indicate that mariculture activity can be a significant source of microplastics. Further research is required to investigate how the high microplastic abundance in mariculture zone affects marine organisms, especially cultured seafood.