Effect of copper doping on plasmonic nanofilms for high performance photovoltaic energy applications.

In the current era, alternative but environment-friendly sources of energy have gained attention to meet the growing energy demands. In particular, the focus of research has been solar energy and using it to fulfill energy demands. Solar energy is either directly converted into electrical energy or stored for later use. Solar cells are a practical way to turn solar energy into electrical energy. Various materials are being investigated to manufacture solar cell devices that can absorb a maximum number of photons present in sunlight. The present study reports thermally evaporated in situ Cu-doped SnS photon absorber thin films with tunable physical properties. This study mainly explored the effects of changing Cu concentrations on the physical features of light absorption of SnS thin films. The thin films were formed by simultaneous resistive heating of Cu and SnS powders on glass substrates at 150 °C. The X-ray diffraction patterns revealed pure SnS thin films having orthorhombic polycrystalline crystal structures oriented preferentially along the (111) plane. Raman spectroscopy confirmed this phase purity. Photoconductivity studies showed phase dependence on Cu content that improved with increasing concentrations of Cu. The optical bandgap energy was also found to be dependent on Cu content and was observed at 1.10-1.47 eV for SnS thin films with variation in the Cu content, i.e., 0-18%. According to the hot probe method, all films displayed p-type conductivity for the substitution of Cu metal atoms. These findings demonstrated that the prepared thin films are substantial candidates as low-cost, suitably efficient, thin-film solar cells featuring environmentally-friendly active layers that absorb sunlight.

Synthesis and Characterization of High-Efficiency Halide Perovskite Nanomaterials for Light-Absorbing Applications.

Inorganic perovskite materials are possible candidates for conversion of solar energy to electrical energy due to their high absorption coefficient. Perovskite solar cells (PSCs) introduced a new type of device structure that has attention due to better efficiencies and interest in PSCs that has been increasing in recent years. Halide perovskite materials such as CsPbIBr2 show remarkable optical and structural performance with their better physical properties. Perovskite solar cells are a possible candidate to replace conventional silicon solar panels. In the present study, CsPbIBr2 perovskite materials' thin films were prepared for light-absorbing application. Five thin films were deposited on the glass substrates by subsequent spin-coating of CsI and PbBr2 solutions, subsequently annealed at different temperature values (as-deposited, 100, 150, 200 and 250 °C) to get CsPbIBr2 thin films with a better crystal structure. Structural characterizations were made by using X-ray diffraction. CsPbIBr2 thin films were found to be polycrystalline in nature. With increasing annealing temperature, the crystallinity was improved, and the crystalline size was increased. Optical properties were studied by using transmission data, and by increasing annealing temperature, a small variation in optical band gap energy was observed in the range of 1.70-1.83 eV. The conductivity of CsPbIBr2 thin films was determined by a hot probe technique and was found to have little fluctuating response toward p-type conductivity, which may be due to intrinsic defects or presence of CsI phase, but a stable intrinsic nature was observed. The obtained physical properties of CsPbIBr2 thin films suggest them as a suitable candidate as a light-harvesting layer. These thin films could be an especially good partner with Si or other lower band gap energy materials in tandem solar cells (TSC). CsPbIBr2 material will harvest light having energy of ∼1.7 eV or higher, while a lower energy part of the solar spectrum will be absorbed in the partner part of the TSC.

Functional bioinspired nanocomposites for anticancer activity with generation of reactive oxygen species.

Cancer is a debilitating and deadly disease caused by the uncontrolled growth of aberrant cell populations. This disease cannot always be controlled with traditional therapies and medicines. Different medicines are being used for this purpose, however these medicines have their side effects and are harmful to healthy cells. A better way to cure cancer disease is by limiting the agglomeration of cancer cells, minimizing their growth and their population by destroying these harmful cells. This could be achieved by controlling the function of mitochondria and DNA in cancer cells with the use of biocompatible materials with tuneable physical properties. Accordingly, research is ongoing as to the use of nanomaterials and nanotechnology in medicine. Zinc oxide semiconductor nanoparticles have displayed good anticancer behaviour. They have unique properties such as biocompatibility, good stability, and are environmentally friendly. Owing to these characteristics, they are focused on biological applications such as drug delivery and cancer therapy. In the present research work, zinc oxide, titanium dioxide nanoparticles and titanium oxide-zinc oxide nanocomposites were successfully trailed for anti-cancer activity. Pure zinc oxide nanoparticles (ZnO NPs), titanium dioxide nanoparticles (TiO2 NPs) and their nanocomposites (TiO2+ZnO NPs) were prepared by the co-precipitation technique. The structural properties were investigated by X-ray diffraction, which confirmed the Wurtzite structure of pure ZnO NPs. The morphology of the NPs was checked by scanning electron microscopy. For incident light having a higher energy band gap of nanomaterials, the electrons are excited to the conduction band and these electrons generate reactive oxygen species (ROS). The efficacy of these nanomaterials was checked by exposing the NPs to the human liver cancer cell HepG2. The MTT assay describes anticancer activity via cell viability. The cell viability of composites was observed to be greater than pure ZnO NPs. Their results showed that the structure of ZnO NPs remains the same with composites of TiO2 NPs, but the band gap of the composite was intermediate for individual samples. It also showed that the anticancer activity of composites was also less than pure ZnO NPs which is due to the reduction of ROS generation. This is observed that nanocomposites of ZnO and TiO2 could be effective in the development of a treatment of human liver cancer cells.