Synergistic interface and compositional engineering of inverted perovskite solar cells enables highly efficient and stable photovoltaic devices.

Recently, interface and compositional engineering have been effective approaches in the field of perovskite solar cells (PSCs). In this work, the surface of the nickel oxide layer and perovskite composition are modified by poly[(9,9-bis(30-((N,N-dimethyl)-N-ethylammonium)-propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)] dibromide (PFN-P2) and deionized (DI) water, respectively, which result in a device with 20.5% efficiency and great stability.

Oxygen Plasma-Induced p-Type Doping Improves Performance and Stability of PbS Quantum Dot Solar Cells.

PbS quantum dots (QDs) have been extensively studied for photovoltaic applications, thanks to their facile and low-cost fabrication processing and interesting physical properties such as size dependent and tunable band gap. However, the performance of PbS QD-based solar cells is highly sensitive to the humidity level in the ambient air, which is a serious obstacle toward its practical applications. Although it has been previously revealed that oxygen doping of the hole transporting layer can mitigate the cause of this issue, the suggested methods to recover the device performance are time-consuming and relatively costly. Here, we report a low-power oxygen plasma treatment as a rapid and low-cost method to effectively recover the device performance and stability. Our optimization results show that a 10 min treatment is the best condition, resulting in an enhanced power conversion efficiency from 6.9% for the as-prepared device to 9% for the plasma treated one. Moreover, our modified device shows long-term shelf-life stability.

A non-catalytic vapor growth regime for organohalide perovskite nanowires using anodic aluminum oxide templates.

In this work, a novel and facile synthesis process to fabricate single crystalline organometal halide perovskite nanowires has been successfully developed. Nanowires were grown in a high density ordered array from metal nanoclusters inside anodic aluminum oxide templates using a non-catalytic chemical vapor deposition method. Specifically, perovskite NWs were grown as a result of the reaction between methylammonium iodide (MAI) and the Pb/Sn (Pb or Sn) metal in anodic aluminum oxide templates under optimal conditions. The characterization results show that there is a reaction zone at the interface between the perovskite material and metal, at the bottom of the anodic aluminum oxide nanochannels. In order to sustain perovskite NW growth, MAI molecules have to diffuse downward through the perovskite NWs to reach the reaction zone. In fact, the reaction is facilitated by the formation of an intermediate product of the metal iodide compound. This suggests that the Pb/Sn metal is converted to PbI2/SnI2 first and then perovskite NWs are formed as a result of the reaction between MAI and PbI2/SnI2 through a vapor-solid-solid process. The optical characterization results demonstrate that the as-synthesized NWs with an ultra-high nanostructure density can serve as ideal candidates for optoelectronic devices, such as solar cells, light-emitting didoes, photodetectors, etc. And the reported growth approach here is highly versatile combining the merits of excellent controllability, cost-effectiveness and tunability on material composition and physical properties.

Feasibility of using bulk metallic glass for self-expandable stent applications.

Self-expandable stents are widely used to restore blood flow in a diseased artery segment by keeping the artery open after angioplasty. Despite the prevalent use of conventional crystalline metallic alloys, for example, nitinol, to construct self-expandable stents, new biomaterials such as bulk metallic glasses (BMGs) are being actively pursued to improve stent performance. Here, we conducted a series of analyses including finite element analysis and molecular dynamics simulations to investigate the feasibility of using a prototypical Zr-based BMG for self-expandable stent applications. We model stent crimping of several designs for different percutaneous applications. Our results indicate that BMG-based stents with diamond-shaped crowns suffer from severe localization of plastic deformation and abrupt failure during crimping. As a possible solution, we further illustrate that such abrupt failure could be avoided in BMG-based stents without diamond shape crowns. This work would open a new horizon for a quest toward exploiting superior mechanical and functional properties of metallic glasses to design future stents. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1874-1882, 2017.