Chlorpromazine-Polypyrrole Drug Delivery System Tailored for Neurological Application.

Nowadays, drug delivery systems (DDSs) are gaining more and more attention. Conducting polymers (CPs) are efficiently used for DDS construction as such systems can be used in therapy. In this research, a well-known CP, polypyrrole (PPy), was synthesized in the presence of the polysaccharide heparin (HEP) and chlorpromazine (CPZ) using sodium dodecyl sulfate (SDS) as electrolyte on a steel substrate. The obtained results demonstrate the successful incorporation of CPZ and HEP into the polymer matrix, with the deposited films maintaining stable electrochemical parameters across multiple doping/dedoping cycles. Surface roughness, estimated via AFM analysis, revealed a correlation with layer thickness-decreasing for thinner layers and increasing for thicker ones. Moreover, SEM images revealed a change in the morphology of PPy films when PPy is electropolymerized in the presence of CPZ and HEP, while FTIR confirmed the presence of CPZ and HEP within PPy. Due to its lower molecular mass compared to HEP, CPZ was readily integrated into the thin polymer matrix during deposition, with diffusion being unimpeded, as opposed to films with greater thickness. Finally, the resulting system exhibited the ability to release CPZ, enabling a dosing range of 10 mg to 20 mg per day, effectively covering the therapeutic concentration range.

Characterization and Behaviour of Silica Engineered Nanocontainers in Low and High Ionic Strength Media.

Mesoporous silica engineered nanomaterials are of interest to the industry due to their drug-carrier ability. Advances in coating technology include using mesoporous silica nanocontainers (SiNC) loaded with organic molecules as additives in protective coatings. The SiNC loaded with the biocide 4,5-dichloro-2-octyl-4-isothiazolin-3-one (DCOIT), i.e., SiNC-DCOIT, is proposed as an additive for antifouling marine paints. As the instability of nanomaterials in ionic-rich media has been reported and related to shifting key properties and its environmental fate, this study aims at understanding the behaviour of SiNC and SiNC-DCOIT in aqueous media with distinct ionic strengths. Both nanomaterials were dispersed in (i) low- (ultrapure water-UP) and (ii) high- ionic strength media-artificial seawater (ASW) and f/2 medium enriched in ASW (f/2 medium). The morphology, size and zeta potential (ζP) of both engineering nanomaterials were evaluated at different timepoints and concentrations. Results showed that both nanomaterials were unstable in aqueous suspensions, with the initial ζP values in UP below -30 mV and the particle size varying from 148 to 235 nm and 153 to 173 nm for SiNC and SiNC-DCOIT, respectively. In UP, aggregation occurs over time, regardless of the concentration. Additionally, the formation of larger complexes was associated with modifications in the ζP values towards the threshold of stable nanoparticles. In ASW, SiNC and SiNC-DCOIT formed aggregates (<300 nm) independently of the time or concentration, while larger and heterogeneous nanostructures (>300 nm) were detected in the f/2 medium. The pattern of aggregation detected may increase engineering nanomaterial sedimentation rates and enhance the risks towards dwelling organisms.

Zn-Al layered double hydroxides induce embryo malformations and impair locomotion behavior in Danio rerio.

Layered double hydroxides (LDHs) are stimuli-responsive anionic nanoclays. The vast possibilities of using LDHs can lead to their existence in the ecosystem, raising a question of potential ecological concern. However, little is known about the effect of these nanomaterials on freshwater organisms. The present study aimed to assess the ecotoxicological effects of Zinc-Aluminium LDH-nitrate (ZnAl LDH-NO3) in zebrafish (Danio rerio) early life stages. The endpoints measured were mortality, malformations and hatching rate after exposure of D. rerio embryos and larvae to ZnAl LDH-NO3 following the OECD 236 guideline. The behavioral, biochemical (markers of oxidative stress and neurotoxicity), and molecular (at DNA level) alterations were also assessed using sub-lethal concentrations. No observable acute effects were detected up to 415.2 mg LDH/L while the 96 h-LC50 was estimated as 559.9 mg/L. Tested LDH caused malformations in D. rerio embryos, such as pericardial edema, incomplete yolk sac absorption and tail deformities (96 h-EC50 = 172.4 mg/L). During the dark periods, the locomotor behavior in zebrafish larvae was affected upon ZnAl LDH-NO3 exposure. However, no significant biochemical and molecular changes were recorded. The present findings suggest that ZnAl LDH-NO3 can be regarded as a non-toxic nanomaterial towards D. rerio (E/LC50 > > 100 mg/L) although impairment of the locomotion behavior on zebrafish embryos can be expected at concentrations below 100 mg/L.

Layered double hydroxides for corrosion-related applications-Main developments from 20 years of research at CICECO.

This work describes the main advances carried out in the field of corrosion protection using layered double hydroxides (LDH), both as additive/pigment-based systems in organic coatings and as conversion films/pre-treatments. In the context of the research topic "Celebrating 20 years of CICECO", the main works reported herein are based on SECOP's group (CICECO) main advances over the years. More specifically, this review describes structure and properties of LDH, delving into the corrosion field with description of pioneering works, use of LDH as additives to organic coatings, conversion layers, application in reinforced concrete and corrosion detection, and environmental impact of these materials. Moreover, the use of computational tools for the design of LDH materials and understanding of ion-exchange reactions is also presented. The review ends with a critical analysis of the field and future perspectives on the use of LDH for corrosion protection. From the work carried out LDH seem very tenable, versatile, and advantageous for corrosion protection applications, although several obstacles will have to be overcome before their use become commonplace.

Molecular Dynamics Model to Explore the Initial Stages of Anion Exchange involving Layered Double Hydroxide Particles.

A classical molecular dynamics (MD) model of fully unconstrained layered double hydroxide (LDH) particles in aqueous NaCl solution was developed to explore the initial stages of the anion exchange process, a key feature of LDHs for their application in different fields. In particular, this study focuses on the active corrosion protection mechanism, where LDHs are able to entrap aggressive species from the solution while releasing fewer corrosive species or even corrosion inhibitors. With this purpose in mind, it was explored the release kinetics of the delivery of nitrate and 2-mercaptobenzothiazole (MBT, a typical corrosion inhibitor) from layered double hydroxide particles triggered by the presence of aggressive chloride anions in solution. It was shown that the delamination of the cationic layers occurs during the anion exchange process, which is especially evident in the case of MBT-.

"Smart" nanosensors for early detection of corrosion: Environmental behavior and effects on marine organisms.

Corrosion is an environmental and economic global problem. "Smart" or stimuli-responsive colorimetric nanosensors for maritime coatings have been proposed as an asset to overcome the limitations of the current monitoring techniques by changing color in the presence of triggers associated with the early stages of corrosion. Layered double hydroxides (Zn-Al LDH; Mg-Al LDH) and silica mesoporous nanocapsules (SiNC) were used as precursor nanocarriers of active compounds: hexacyanoferrate ions ([Fe(CN)6]3-) and phenolphthalein (PhPh), respectively. Additionally, the safer-by-design principles were employed to optimize the nanosensors in an eco-friendly perspective (e.g., regular vs. warm-washed SiNC-PhPh; immobilization using different carriers: Zn-Al LDH-[Fe(CN)6]3- vs. Mg-Al LDH-[Fe(CN)6]3-). Therefore, the present study aims to assess the environmental behavior in saltwater and the toxic effects of the nanosensors, their nanocarriers, and the active compounds on the marine microalgae Tetraselmis chuii and the crustacean Artemia salina. Briefly, tested compounds exhibited no acute toxic effects towards A. salina (NOEC = 100 mg/L), apart from SiNC-PhPh (LC50 = 2.96 mg/L) while tested active compounds and nanosensors caused significant growth inhibition on T. chuii (lowest IC50 = 0.40 mg/L for SiNC-PhPh). The effects of [Fe(CN)6]3- were similar regardless of the nanocarrier choice. Regarding SiNC-PhPh, its toxicity can be decreased at least twice by simply reinforcing the nanocapsules washing, which contributes to the removal (at least partially) of the surfactants residues. Thus, implementing safe-by-design strategies in the early stages of research proved to be critical, although further progress is still needed towards the development of truly eco-friendly nanosensors.

Can the toxicity of polyethylene microplastics and engineered nanoclays on flatfish (Solea senegalensis) be influenced by the presence of each other?

Microplastics and nanomaterials are applied in a myriad of commercial and industrial applications. When leaked to natural environments, such small particles might threaten living organisms' health, particularly when considering their potential combination that remains poorly investigated. This study investigated the physiological and biochemical effects of polyethylene (PE; 64-125 µm in size, 0.1, 1.0, and 10.0 mg·L-1) single and combined with an engineered nanomaterial applied in antifouling coatings, the copper-aluminium layered double hydroxides (Cu-Al LDH; 0.33, 1.0, and 3.33 mg·L-1) in the flatfish Solea senegalensis larvae (8 dph) after 3 h exposure, in a full factorial design. Particles ingestion, histopathology, and biochemical biomarkers were assessed. Fish larvae presented <1 PE particles in their gut, independently of their concentration in the medium. The histological health index showed minimal pathological alterations at PE combined exposure, with a higher value observed at 1 mg LDH·L-1 × 0.1 mg PE·L-1. Gut deformity and increased antioxidant defences (catalase), neurotransmission (acetylcholinesterase), and aerobic energy production (electron transport system) were observed at PE ≥ 1.0 mg·L-1. No oxidative damage (lipid peroxidation) or alterations in the detoxification capacity (glutathione-S-transferase) was observed on single and combined exposures. PE, combined or not with Cu-Al LDH, does not seem to compromise larvae's homeostasis considering levels reported so far in the marine and aquaculture environments. However, harsh effects are expected with MP contamination rise, as projections suggest.

Effects of nanostructure antifouling biocides towards a coral species in the context of global changes.

Biofouling prevention is one of the biggest challenges faced by the maritime industry, but antifouling agents commonly impact marine ecosystems. Advances in antifouling technology include the use of nanomaterials. Herein we test an antifouling nano-additive based on the encapsulation of the biocide 4,5-dichloro-2-octyl-4-isothiazolin-3-one (DCOIT) in engineered silica nanocontainers (SiNC). The work aims to assess the biochemical and physiological effects on the symbiotic coral Sarcophyton cf. glaucum caused by (1) thermal stress and (2) DCOIT exposure (free or nanoencapsulated forms), in a climate change scenario. Accordingly, the following hypotheses were addressed: (H1) ocean warming can cause toxicity on S. cf. glaucum; (H2) the nanoencapsulation process decreases DCOIT toxicity towards this species; (H3) the biocide toxicity, free or encapsulated forms, can be affected by ocean warming. Coral fragments were exposed for seven days to DCOIT in both free and encapsulated forms, SiNC and negative controls, under two water temperature regimes (26 °C and 30.5 °C). Coral polyp behavior and photosynthetic efficiency were determined in the holobiont, while biochemical markers were assessed individually in the endosymbiont and coral host. Results showed transient coral polyp retraction and diminished photosynthetic efficiency in the presence of heat stress or free DCOIT, with effects being magnified in the presence of both stressors. The activity of catalase and glutathione-S-transferase were modulated by temperature in each partner of the symbiosis. The shifts in enzymatic activity were more pronounced in the presence of free DCOIT, but to a lower extent for encapsulated DCOIT. Increased levels of oxidative damage were detected under heat conditions. The findings highlight the physiological constrains elicited by the increase of seawater temperature to symbiotic corals and demonstrate that DCOIT toxicity can be minimized through encapsulation in SiNC. The presence of both stressors magnifies toxicity and confirm that ocean warming enhances the vulnerability of tropical photosynthetic corals to local stressors.

Use of ZnAl-Layered Double Hydroxide (LDH) to Extend the Service Life of Reinforced Concrete.

This work investigated the use of ZnAl-layered double hydroxide (LDH) intercalated with nitrate or nitrite ions for controlling the corrosion of steel in reinforced concrete. The work started by analyzing the stability of the powder in the 1-14 pH range and the capacity for capturing chloride ions in aqueous solutions of different pH. The effect of the ZnAl-LDH on the corrosion of steel was studied in aqueous 0.05 M NaCl solution and in mortars immersed in 3.5% NaCl. It was found that the LDH powders dissolved partially at pH > 12. The LDH was able to capture chloride ions from the external solution, but the process was pH-dependent and stopped at high pH due to the partial dissolution of LDH and the preferential exchange of OH- ions. These results seemed to imply that ZnAl-LDH would not work in the alkaline environment inside the concrete. Nonetheless, preliminary results with mortars containing ZnAl-LDH showed lower penetration of chloride ions and higher corrosion resistance of the steel rebars.

Toxicity of engineered micro- and nanomaterials with antifouling properties to the brine shrimp Artemia salina and embryonic stages of the sea urchin Paracentrotus lividus.

Antifouling booster biocides are chemicals used in protective paints to tackle the adhesion of fouling organisms to maritime artificial structures. However, they are also known to exert toxic effects on non-target organisms. Recent research developments have highlighted the potential use of engineered micro/nanomaterials (EMNMs) as carriers of antifouling booster biocides in order to control their release and to reduce the harmful effects on living biota. In the present study, we sought to assess the toxicity of two commercially-available booster biocides: (zinc pyrithione (ZnPT) and copper pyrithione (CuPT)); three unloaded engineered micro/nanomaterials (EMNMs); layered double hydroxides (LDH), silica nanocapsules (SiNC), polyurea microcapsules (PU); , and six novel EMNMs (loaded with each of the two biocides). The exposure tests were conducted on the larval stage (nauplii) of the brine shrimp Artemia salina and on two embryonic developmental stages of the European purple sea urchin Paracentrotus lividus. The findings indicate that the unloaded LDH and PU (i.e. both biocide-free EMNMs) have non/low toxic effects on both species. The unloaded SiNC, in contrast, exerted a mild toxic effect on the A. salina nauplii and P. lividus embryos. The free biocides presented different toxicity values, with ZnPT being more toxic than CuPT in the P. lividus assays. LDH-based pyrithiones demonstrated lower toxicity compared to the free forms of the state-of-the-art compounds, and constitute good candidates in terms of their antifouling efficacy.

Ultra-high pressure modified cellulosic fibres with antimicrobial properties.

In this work bleached E. globulus kraft pulp was doped with polyhexamethylene biguanide (PHMB) from an aqueous solution or from a suspension of silica capsules (PHMB@silica) by impregnation under atmospheric or ultra-high pressure (UHP) conditions (500MPa). The antimicrobial properties of pulps were evaluated towards gram-negative E. coli and gram-positive L. innocua bacteria. PHMB loads below 500mg per kg of pulp revealed negligible bacteriostatic properties, whereas PHMB loads of ca 3000-4000mg per kg demonstrated bactericidal properties of pulp without significant deterioration of its mechanical strength. The UHP impregnation allowed significant improvement of PHMB uptake. Thus, under equal conditions, PHMB uptake was ca 25% greater under UHP than under atmospheric pressure impregnation, whereas the leachable amounts of PHMB in both pulps were comparable. The sorption of PHMB@silica on pulp in suspension under UHP conditions was ca 17% greater than under atmospheric pressure with almost 70% increase of leachable PHMB.

Gold nanorods induce early embryonic developmental delay and lethality in zebrafish (Danio rerio).

Due to their unique electronic and optical features, gold nanoparticles (AuNP) have received a great deal of attention for application in different fields such as catalysis, electronics, and biomedicine. The large-volume manufacturing predicted for future decades and the inevitable release of these substances into the environment necessitated an assessment of potential adverse human and ecological risks due to exposure to AuNP. Accordingly, this study aimed to examine the acute and developmental toxicity attributed to a commercial suspension of Au nanorods stabilized with cetyltrimethylammonium bromide (CTAB-AuNR) using early embryonic stages of zebrafish (Danio rerio), a well-established model in ecotoxicology. Zebrafish embryos were exposed to CTAB-AuNR (0-150 µg/L) to determine for developmental assessment until 96 hr post fertilization (hpf) and lethality. Uptake of CTAB-AuNR by embryos and nanoparticles potential to induce DNA damage was also measured at 48 and 96 hpf. Analysis of the concentration-response curves with cumulative mortality at 96 hpf revealed a median lethal concentration (LC50,96h) of 110.2 µg/L. At sublethal concentrations, CTAB-AuNR suspensions were found to produce developmental abnormalities such as tail deformities, pericardial edema, decreased body length, and delayed eye, head, and tail elongation development. Further, less than 1% of the initial concentration of CTAB-AuNR present in the exposure media was internalized by zebrafish embryos prior to (48 hpf) and after hatching (96 hpf). In addition, no marked DNA damage was detected in embryos after exposure to CTAB-AuNR. Overall, CTAB-AuNR suspensions produced lethal and sublethal effects on zebrafish embryos with possible repercussions in fitness of adult stages. However, these results foresee a low risk for fish since the observed effects occurred at concentrations above the levels expected to find in the aquatic environment.

Light-Induced Proton Pumping with a Semiconductor: Vision for Photoproton Lateral Separation and Robust Manipulation.

Energy-transfer reactions are the key for living open systems, biological chemical networking, and the development of life-inspired nanoscale machineries. It is a challenge to find simple reliable synthetic chemical networks providing a localization of the time-dependent flux of matter. In this paper, we look to photocatalytic reaction on TiO2 from different angles, focusing on proton generation and introducing a reliable, minimal-reagent-consuming, stable inorganic light-promoted proton pump. Localized illumination was applied to a TiO2 surface in solution for reversible spatially controlled "inorganic photoproton" isometric cycling, the lateral separation of water-splitting reactions. The proton flux is pumped during the irradiation of the surface of TiO2 and dynamically maintained at the irradiated surface area in the absence of any membrane or predetermined material structure. Moreover, we spatially predetermine a transient acidic pH value on the TiO2 surface in the irradiated area with the feedback-driven generation of a base as deactivator. Importantly we describe how to effectively monitor the spatial localization of the process by the in situ scanning ion-selective electrode technique (SIET) measurements for pH and the scanning vibrating electrode technique (SVET) for local photoelectrochemical studies without additional pH-sensitive dye markers. This work shows the great potential for time- and space-resolved water-splitting reactions for following the investigation of pH-stimulated processes in open systems with their flexible localization on a surface.

Efficacy and Ecotoxicity of Novel Anti-Fouling Nanomaterials in Target and Non-Target Marine Species.

Biofouling is a global problem that affects virtually all the immersed structures. Currently, several novel environmentally friendly approaches are being tested worldwide to decrease the toxicity of biocides in non-fouling species, such as the encapsulation/immobilization of commercially available biocides, in order to achieve control over the leaching rate. The present study addresses the toxicity of two widely used booster biocides, zinc pyrithione (ZnPT) and copper pyrithione (CuPT), in its free and incorporated forms in order to assess their toxicity and anti-fouling efficacy in target and non-target species. To achieve this goal, the following marine organisms were tested; the green microalgae Tetraselmis chuii (non-target species) and both target species, the diatom Phaeodactylum tricornutum and the mussel Mytilus edulis. Organisms were exposed to both biocides, two unloaded nanostructured materials and nanomaterials loaded with biocides, from 10 µg/L to 100 mg/L total weight, following standard protocols. The most eco-friendly and simultaneously efficient anti-fouling solution against the two photosynthetic species (nanoclays loaded with ZnPT) was then tested on mussels to assess its lethal efficacy (LC50 = 123 µg/L) and compared with free biocide (LC50 = 211 µg/L) and unloaded material (LC50 > 1000 µg/L). A second exposure test with sub-lethal concentrations (lower than 100 µg/L), using mussels, was carried out to assess biochemical changes caused by the tested compounds. Oxidative stress, detoxification and neurotransmission markers were not responsive; however, different antioxidant patterns were found with free ZnPT and loaded nanoclay exposures. Thus, the immobilization of the biocide ZnPT into nanoclays proved to be a promising efficient and eco-friendly anti-fouling strategy.

Corrosion inhibition of copper in aqueous chloride solution by 1H-1,2,3-triazole and 1,2,4-triazole and their combinations: electrochemical, Raman and theoretical studies.

Triazoles are well-known organic corrosion inhibitors of copper. 1H-1,2,3-Triazole and 1,2,4-triazole, two very simple molecules with the only difference being the positions of the nitrogen atoms in the triazole ring, were studied in this work as corrosion inhibitors of copper in 50 mM NaCl solution using a set of electrochemical and analytical techniques. The results of electrochemical tests indicate that 1H-1,2,3-triazole exhibited superior inhibitor properties but could not suppress anodic copper dissolution at moderate anodic potentials (>+300 mV SCE), while 1,2,4-triazole, although it exhibited higher anodic currents, suppressed anodic copper dissolution at very anodic potentials. Density functional theory calculations were also performed to interpret the measured data and trends observed in the electrochemical studies. The computational studies considered either the inhibitors isolated in the gaseous phase or adsorbed onto Cu(111) surface models. From the calculations, the mechanisms of the inhibitive effects of both triazoles were established and plausible mechanisms of formation of the protective films on the Cu surface were proposed. The results of this study hold positive implications for research in the areas of catalysis, and copper content control in water purification systems.

Control of crystallite and particle size in the synthesis of layered double hydroxides: Macromolecular insights and a complementary modeling tool.

Zinc-aluminum layered double hydroxides with nitrate intercalated (Zn(n)Al-NO3, n=Zn/Al) is an intermediate material for the intercalation of different functional molecules used in a wide range of industrial applications. The synthesis of Zn(2)Al-NO3 was investigated considering the time and temperature of hydrothermal treatment. By examining the crystallite size in two different directions, hydrodynamic particle size, morphology, crystal structure and chemical species in solution, it was possible to understand the crystallization and dissolution processes involved in the mechanisms of crystallite and particle growth. In addition, hydrogeochemical modeling rendered insights on the speciation of different metal cations in solution. Therefore, this tool can be a promising solution to model and optimize the synthesis of layered double hydroxide-based materials for industrial applications.

Silica nanocontainers for active corrosion protection.

Novel self-healing protective coatings with nanocontainers of corrosion inhibitors open new opportunities for long-term anticorrosion protection of different metallic materials. In this paper a new type of functional nanoreservoir based on silica nanocapsules (SiNC) synthesized and loaded with corrosion inhibitor 2-mercaptobenzothiazole (MBT) in a one-stage process is reported for the first time. Unlike conventional mesoporous silica nanoparticles, SiNC possess an empty core and shell with gradual mesoporosity, arising from the particular conditions of the synthetic route adopted, which confers significant loading capacity and allows prolonged and stimuli-triggered release of the inhibiting species. The kinetics of inhibitor release was studied at different pH values and concentrations of NaCl. The results show a clear dependence of the release profiles on corrosion relevant triggers such as pH and Cl(-) concentration. When SiNC loaded with MBT are dispersed in NaCl solution, there is a significant decrease of the corrosion activity on aluminium alloy 2024. More importantly, when SiNC-MBT is added to a conventional water-based coating formulation, the modified coating hampers corrosion activity at the metal interface, better than in the case of direct addition of corrosion inhibitor. Furthermore, self-healing is observed before and after artificially inflicting defects in the modified coatings. As a result, the developed nanocontainers show high potential to be used in new generation of active protective coatings.

Viscoelastic characterization of benzo-crown ether functionalized electroactive films.

Electrochemical, acoustic wave and imaging (AFM) methods were used to characterize electroactive poly[Ni(3-Mesalophen-b15-c5)] films. The distinct physical principles of these techniques generate different responses to film characteristics, such that their simplistic correlation in the context of a single uniform film model does not adequately describe the data. Film behaviour can only be rationalised using a two layer model comprising a dense (poorly solvated) inner layer and an outer layer comprising islands of diffuse (highly solvated) polymer. The two layers can be observed directly by AFM imaging. The balance of their contributions shifts with polymer coverage: the inner layer dominates thin films and the outer layer dominates thick films. The inner layer is acoustically more rigid and, even if ion transport is slow, is sufficiently thin as to pose no major barrier to electrochemical communication with the underlying electrode. For very thin films, gravimetric interpretation of the acoustic wave response correlates simply with coulometric data; thicker films require viscoelastic phenomena to be considered. The low polymer segment density of the outer layer facilitates ion transport but results in weak acoustic coupling, such that the acoustic and coulometric assays differ. By combining the AFM, acoustic wave and electrochemical responses one can establish a quantitative picture of component layer populations and characteristics.

Online integrated solution to collect data, generate information and manage events in the human biomonitoring field.

In the ambit of Work Package 1 of the ESBIO Project, an online integrated solution to collect data, to generate information, and to manage mainly information-sharing events related with human biomonitoring within Europe has been designed and is being implemented. The present paper summarises the methodological approaches used by the authors as proposers, general promoters and disseminators of this strategic concept, as well as the first outcomes and future actions to be taken, in the short and longer term, to face present and future challenges to make this innovative solution happen.