Large-scale fabrication of ion-selective electrodes for simultaneous detection of Na+, K+, and Ca2+ in biofluids using a smartphone-based potentiometric sensing platform.

A significant bottleneck exists for mass-production of ion-selective electrodes despite recent developments in manufacturing technologies. Here, we present a fully-automated system for large-scale production of ISEs. Three materials, including polyvinyl chloride, polyethylene terephthalate and polyimide, were used as substrates for fabricating ion-selective electrodes (ISEs) using stencil printing, screen-printing and laser engraving, respectively. We compared sensitivities of the ISEs to determine the best material for the fabrication process of the ISEs. The electrode surfaces were modified with various carbon nanomaterials including multi-walled carbon nanotubes, graphene, carbon black, and their mixed suspensions as the intermediate layer to enhance sensitivities of the electrodes. An automated 3D-printed robot was used for the drop-cast procedure during ISE fabrication to eliminate manual steps. The sensor array was optimized, and the detection limits were 10-5 M, 10-5 M and 10-4 M for detection of K+, Na+ and Ca2+ ions, respectively. The sensor array integrated with a portable wireless potentiometer was used to detect K+, Na+ and Ca2+ in real urine and simulated sweat samples and results obtained were in agreement with ICP-OES with good recoveries. The developed sensing platform offers low-cost detection of electrolytes for point-of-care applications.

Portable smartphone integrated 3D-Printed electrochemical sensor for nonenzymatic determination of creatinine in human urine.

3D printing technologies are an attractive for fabricating electrochemical sensors due to their ease of operation, freedom of design, fast prototyping, low waste, and low cost. We report the fabrication of a simple 3D-printed electrochemical sensing device for non-enzymatic detection of creatinine, an important indicator of renal function. To create the 3D-printed electrodes (3DE), carbon black/polylactic acid (CB/PLA) composite filament was used. The 3DE was activated using 0.5 M NaOH via amperometry prior to use to improve electrochemical performance. To give selectivity for creatinine, the activated 3DE was modified with a copper oxide nanoparticle-ionic liquid/reduced graphene oxide (CuO-IL/rGO) composite. The modified 3DE was characterized using microscopy and electrochemistry. Cyclic voltammetry and amperometry were used to evaluate sensor performance. The modified 3DE provided electrocatalytic activity towards creatinine without enzymes. Under optimal conditions, the modified 3DE directly coupled with a portable smartphone potentiostat exhibited the linear detection range of 0.5-35.0 mM, and the limit of detection was 37.3 µM, which is sufficient for detecting creatinine in human urine samples. Furthermore, the other physiological compounds present in human urine were not detected on the modified 3DE. Therefore, the modified 3DE could be a tool for effective creatinine screening in the urine.

Microfluidic Paper-Based Device for Medicinal Diagnosis.

BACKGROUND: The demand for point-of-care testing (POCT) devices has rapidly grown since they offer immediate test results with ease of use, makingthem suitable for home self-testing patients and caretakers. However, the POCT development has faced the challenges of increased cost and limited resources. Therefore, the paper substrate as a low-cost material has been employed to develop a cost-effective POCT device, known as "Microfluidic paper-based analytical devices (µPADs)". This device is gaining attention as a promising tool for medicinal diagnostic applications owing to its unique features of simple fabrication, low cost, enabling manipulation flow (capillarydriven flow), the ability to store reagents, and accommodating multistep assay requirements. OBJECTIVE: This review comprehensively examines the fabrication methods and device designs (2D/3D configuration) and their advantages and disadvantages, focusing on updated µPADs applications for motif identification. METHODS: The evolution of paper-based devices, starting from the traditional devices of dipstick and lateral flow assay (LFA) with µPADs, has been described. Patterned structure fabrication of each technique has been compared among the equipment used, benefits, and drawbacks. Microfluidic device designs, including 2D and 3D configurations, have been introduced as well as their modifications. Various designs of µPADs have been integrated with many powerful detection methods such as colorimetry, electrochemistry, fluorescence, chemiluminescence, electrochemiluminescence, and SER-based sensors for medicinal diagnosis applications. CONCLUSION: The µPADs potential to deal with commercialization in terms of the state-of-the-art of µPADs in medicinal diagnosis has been discussed. A great prototype, which is currently in a reallife application breakthrough, has been updated.

Improvement in sensitivity for lateral flow immunoassay of ferritin using novel device design based on gold-enhanced gold nanoparticles.

This work introduces a low-cost adhesive tape combined with a hydroxylamine/polyvinyl alcohol/polyethylene oxide (HA/PVA/PEO) blend film to fabricate novel devices for improving sensitivity of gold nanoparticle (AuNP)-based lateral flow immunoassays (LFIAs) via two platforms: (1) LFIA device with integrated gold enhancement and (2) LFIA device with two independent sample inlets. The detection of ferritin has been used for proof-of-concept. The adhesive tape inserted in the devices assists to separate two solutions independently flowing from two different inlets toward a nitrocellulose membrane. On-device gold enhancement was achieved by the enlargement of AuNPs via the catalytic reaction of KAuCl4 and HA using the HA/PVA/PEO blend film easily prepared via a solution-casting technique, which could delay the flow of HA released from the film for 180s and improve storage stability of the device. Under optimal conditions evaluated by naked eyes, the gold enhancement (LOD = 0.5 ng/mL) and double-sample inlet (LOD = 2 ng/mL) devices exhibited 20-fold and fivefold higher sensitivity respectively than a conventional device, verifying the sensitivity improvement. Furthermore, the proposed device was successfully detected ferritin in human serum samples within 10 min via naked-eye observation, exhibiting rapidity and simplicity of use, and the capability to perform on-site assays.