Engineering the Polymer-MOF Interface in Microporous Composites to Address Complex Mixture Separations.

Poor interfacial compatibility remains a pressing challenge in the fabrication of high-performance polymer-MOF composites. In response, introducing compatible chemistries such as a carboxylic acid moiety has emerged as a compelling strategy to increase polymer-MOF interactions. In this work, we leveraged compatible functionalities in UiO-66-NH2 and a carboxylic acid-functionalized PIM-1 to fabricate mixed-matrix membranes (MMMs) with improved separation performance compared to PIM-1-based MMMs in industrially relevant conditions. Under pure-gas conditions, PIM-COOH-based MMMs retained selectivity with increasing MOF loading and showed increased permeability due to increased diffusion. The composites were further investigated under industrially relevant conditions, including CO2/N2, CO2/CH4, and H2S/CO2/CH4 mixtures, to elucidate the effects of competitive sorption and plasticization. Incorporation of UiO-66-NH2 in PIM-COOH and PIM-1 mitigated the effects of CO2- and H2S-induced plasticization typically observed in linear polymers. In CO2-based binary mixed-gas tests, all samples showed similar performance as that in pure-gas tests, with minimal competitive sorption contributions associated with the amine functional groups of the MOF. In ternary mixed-gas tests, improved plasticization resistance and interfacial compatibility resulted in PIM-COOH-based MMMs having the highest H2S/CH4 and CO2/CH4 selectivity combinations among the films tested in this study. These findings demonstrate that selecting MOFs and polymers with compatible functional groups is a useful strategy in developing high-performing microporous MMMs that require stability under complex and industrially relevant conditions.

Uncertainty in Composite Membranes: From Defect Engineering to Film Processing.

Composite membranes featuring metal-organic framework (MOF)-dispersed polymers have attracted tremendous attention in recent years. However, evaluating commercial viability is oftentimes obscured by the irreproducibility in both MOF synthesis and film manufacturing protocols. Variability in MOF property sets are typically ascribed to crystal defects resulting from subtle variations in synthesis, but quantitative studies investigating the role of defects on transport properties are exceedingly rare. Likewise, controlled film formation protocols are rarely reported in the open literature, making it difficult to provide substantial and informative structure-property correlations. This study aims to address these uncertainties. To this end, two samples of a prototypical MOF, UiO-66-NH2, were synthesized to feature similar particle size, morphology, and colloidal stability. However, defect engineering protocols coupled with careful screening experiments were developed to synthesize the two MOFs with maximally different porosities. Composite membranes were prepared for each MOF and a high-performance polymer, 6FDA-Durene, and then tested for light gas permeation measurements, revealing a small and unexpected enhancement in CO2/CH4 performance for samples containing low-porosity UiO-66-NH2. Mechanistic studies on sorption revealed a surprising 50% decrease in sorption capacity for high-porosity UiO-66-NH2, completely offsetting enhancements from increased gas diffusion. By using multiple replicate experiments, the sample-to-sample variation was large enough to obscure any differences in permeability and selectivity between the two types of MOF composites at low volume fractions. Application of the Maxwell model to extrapolate pure-MOF performance led to significant variations in predicted values, demonstrating the importance of collecting and reporting replicate experiments for membrane preparation and testing.

Leveraging Free Volume Manipulation to Improve the Membrane Separation Performance of Amine-Functionalized PIM-1.

Gas-separation polymer membranes display a characteristic permeability-selectivity trade-off that has limited their industrial use. The most comprehensive approach to improving performance is to devise strategies that simultaneously increase fractional free volume, narrow free volume distribution, and enhance sorption selectivity, but generalizable methods for such approaches are exceedingly rare. Here, we present an in situ crosslinking and solid-state deprotection method to access previously inaccessible sorption and diffusion characteristics in amine-functionalized polymers of intrinsic microporosity. Free volume element (FVE) size can be increased while preserving a narrow FVE distribution, enabling below-upper bound polymers to surpass the H2 /N2 , H2 /CH4 , and O2 /N2 upper bounds and improving CO2 -based selectivities by 200 %. This approach can transform polymers into chemical analogues with improved performance, thereby overcoming traditional permeability-selectivity trade-offs.

Exposing the inadequacy of redox formalisms by resolving redox inequivalence within isovalent clusters.

In this report we examine a family of trinuclear iron complexes by multiple-wavelength, anomalous diffraction (MAD) to explore the redox load distribution within cluster materials by the free refinement of atomic scattering factors. Several effects were explored that can impact atomic scattering factors within clusters, including 1) metal atom primary coordination sphere, 2) M-M bonding, and 3) redox delocalization in formally mixed-valent species. Complexes were investigated which vary from highly symmetric to fully asymmetric by 57Fe Mössbauer and X-ray diffraction to explore the relationship between MAD-derived data and the data available from these widely used characterization techniques. The compounds examined include the all-ferrous clusters [ n Bu4N][(tbsL)Fe3(µ3-Cl)] (1) ([tbsL]6- = [1,3,5-C6H9(NC6H4-o-NSi t BuMe2)3]6-]), (tbsL)Fe3(py) (2), [K(C222)]2[(tbsL)Fe3(µ3-NPh)] (4) (C222 = 2,2,2-cryptand), and the mixed-valent (tbsL)Fe3(µ3-NPh) (3). Redox delocalization in mixed-valent 3 was explored with cyclic voltammetry (CV), zero-field 57Fe Mössbauer, near-infrared (NIR) spectroscopy, and X-ray crystallography techniques. We find that the MAD results show an excellent correspondence to 57Fe Mössbauer data; yet also can distinguish between subtle changes in local coordination geometries where Mössbauer cannot. Differences within aggregate oxidation levels are evident by systematic shifts of scattering factor envelopes to increasingly higher energies. However, distinguishing local oxidation levels in iso- or mixed-valent materials can be dramatically obscured by the degree of covalent intracore bonding. MAD-derived atomic scattering factor data emphasize in-edge features that are often difficult to analyze by X-ray absorption near edge spectroscopy (XANES). Thus, relative oxidation levels within the cluster were most reliably ascertained from comparing the entire envelope of the atomic scattering factor data.

Spectroscopic and 1O2 Sensitization Characteristics of a Series of Isomeric Re(bpy)(CO)3Cl Complexes Bearing Pendant BODIPY Chromophores.

Two new Re(I)bipyridyltricarbonyl chloride complexes, Re(BB3)(CO)3Cl and Re(BB4)(CO)3Cl, featuring BODIPY groups appended to the 5,5'- or 6,6'-positions of the bipyridine ligand, respectively, were synthesized as structurally isomeric compliments to a previously reported 4,4'-substituted homologue, Re(BB2)(CO)3Cl. X-ray crystal structures of the compounds show that the 4,4'-, 5,5'-, and 6,6'-substitution patterns place the BODIPY groups at progressively shorter distances of 9.43, 8.39, and 5.56 Å, respectively, from the complexes' Re centers. The photophysical properties of the isomeric complexes were investigated to ascertain the manner in which the heavy rhenium atom might induce intersystem crossing of the pendant BODIPY moieties positioned at progressively shorter through-space distances. Electronic absorption spectroscopy revealed that the three metal complexes retain the strong visible absorption features characteristic of the bpyBODIPY (BB2-BB4) ligands; however, the fluorescence of the parent borondipyrromethane appended ligands is attenuated by more than an order of magnitude in Re(BB2)(CO)3Cl and Re(BB3)(CO)3Cl and by more than two orders of magnitude in Re(BB4)(CO)3Cl. Furthermore, phosphorescence from Re(BB4)(CO)3Cl is observed under a nitrogen atmosphere, consistent with highly efficient ISC to the triplet-excited state. Singlet oxygen sensitization studies confirm that all three complexes produce singlet oxygen with quantum yields that increase as the distance of the BODIPY groups to the heavy rhenium center is decreased. The trends observed across the series of rhenium complexes with respect to emission and 1O2 sensitization properties can be rationalized in terms of the varied distal separation between the metal center and BODIPY groups in each system.

Reduction of CO2 using a Rhenium Bipyridine Complex Containing Ancillary BODIPY Moieties.

The reduction of carbon dioxide to chemical fuels such as carbon monoxide is an important challenge in the field of renewable energy conversion. Given the thermodynamic stability of carbon dioxide, it is difficult to efficiently activate this substrate in a selective fashion and the development of new electrocatalysts for CO2 reduction is of prime importance. To this end, we have prepared and studied a new fac-ReI(CO)3 complex supported by a bipyridine ligand containing ancillary BODIPY moieties ([Re(BB2)(CO)3Cl]). Voltammetry experiments revealed that this system displays a rich redox chemistry under N2, as [Re(BB2)(CO)3Cl] can be reduced by up to four electrons at modest potentials. These redox events have been characterized as the ReI/0 couple, and three ligand based reductions - two of which are localized on the BODIPY units. The ability of the BB2 ligand to serve as a non-innocent redox reservoir is manifest in an enhanced electrocatalysis with CO2 as compared to an unsubstituted Re-bipyridine complex lacking BODIPY units ([Re(bpy)(CO)3Cl]). The second order rate constant for reduction of CO2 by [Re(BB2)(CO)3Cl] was measured to be k = 3400 M-1s-1 at an applied potential of -2.0 V versus SCE, which is roughly three times greater than the corresponding unsubstituted Re-bipyridine homologue. Photophysical and photochemical studies were also carried out to determine if [Re(BB2)(CO)3Cl] was a competent platform for CO2 reduction using visible light. These experiments showed that this complex supports unusual excited state dynamics that precludes efficient CO2 reduction and are distinct from those that are typically observed for fac-ReI(CO)3 complexes.

Synthesis, electrochemistry, and electrogenerated chemiluminescence of two BODIPY-appended bipyridine homologues.

Two new 2,2'-bipyridine (bpy) derivatives containing ancillary BODIPY chromophores attached at the 5- and 5'-positions (BB3) or 6- and 6'-positions (BB4) were prepared and characterized. In this work, the basic photophysics, electrochemistry, and electrogenerated chemiluminescence (ECL) of BB3 and BB4 are compared with those previously reported for a related bpy-BODIPY derivative (BB2) (J. Phys. Chem. C 2011, 115, 17993-18001). Cyclic voltammetry revealed that BB3 and BB4 display reversible 2e(-) oxidation and reduction waves, which consist of two closely spaced (50-70 mV) 1e(-) events. This redox behavior is consistent with the frontier molecular orbitals calculated for BB3 and BB4 and indicates that the 2,2'-bipyridine spacer of each bpy-BODIPY homologue does not facilitate efficient electronic communication between the tethered indacene units. In the presence of a coreactant such as tri-n-propylamine (TPA) or benzoyl peroxide (BPO), BB3 and BB4 exhibit strong ECL and produce spectra that are very similar to their corresponding photoluminescence profiles. The ECL signal obtained under annihilation conditions, however, is significantly different and is characterized by two distinct bands. One of these bands is centered at ∼570 nm and is attributed to emission via an S- or T-route. The second band occurs at longer wavelengths and is centered around ∼740 nm. The shape and concentration dependence of this long-wavelength ECL signal is not indicative of emission from an excimer or aggregate, but rather it suggests that a new emissive species is formed from the bpy-BODIPY luminophores during the annihilation process.