Quantitative NMR Spectrometry of Phenylpropanoids, including Isoeugenol in Herbs, Spices, and Essential Oils.

Isoeugenol (2-methoxy-4-(1-propenyl)phenol) has been recently classified as possibly carcinogenic to humans (Group 2B) by the International Agency for Research on Cancer (IARC). This study conducted an analysis of isoeugenol in common herbs and spices, including basil, cinnamon, ginger, and nutmeg, using 1H nuclear magnetic resonance (NMR) spectrometry. Additionally, over 1300 coffee samples were analysed by 1H-NMR for isoeugenol, but it was not detected in any of the analysed samples. Various essential oils, including nutmeg, basil, clove, sweet flag, and ylang-ylang oils, were examined for isoeugenol content. Out of the twelve nutmeg oils tested, four contained isoeugenol, with concentrations ranging from 3.68 ± 0.09 g/kg to 11.2 ± 0.10 g/kg. However, isoeugenol was not detected in the essential oils of calamus, basil, ylang-ylang, and clove using NMR spectrometry. These findings warrant critical evaluation of the previous literature, given reports of high isoeugenol levels in some of these matrices. A toxicological assessment has determined that there is no risk to human health by exposure to isoeugenol via nutmeg essential oils.

Comparative Analysis of LC-ESI-IM-qToF-MS and FT-NIR Spectroscopy Approaches for the Authentication of Organic and Conventional Eggs.

The importance of animal welfare and the organic production of chicken eggs has increased in the European Union in recent years. Legal regulation for organic husbandry makes the production of organic chicken eggs more expensive compared to conventional husbandry and thus increases the risk of food fraud. Therefore, the aim of this study was to develop a non-targeted lipidomic LC-ESI-IM-qToF-MS method based on 270 egg samples, which achieved a classification accuracy of 96.3%. Subsequently, surrogate minimal depth (SMD) was applied to select important variables identified as carotenoids and lipids based on their MS/MS spectra. The LC-MS results were compared with FT-NIR spectroscopy analysis as a low-resolution screening method and achieved 80.0% accuracy. Here, SMD selected parts of the spectrum which are associated with lipids and proteins. Furthermore, we used SMD for low-level data fusion to analyze relations between the variables of the LC-MS and the FT-NIR spectroscopy datasets. Thereby, lipid-associated bands of the FT-NIR spectrum were related to the identified lipids from the LC-MS analysis, demonstrating that FT-NIR spectroscopy partially provides similar information about the lipidome. In future applications, eggs can therefore be analyzed with FT-NIR spectroscopy to identify conspicuous samples that can subsequently be counter-tested by mass spectrometry.

Absorption Coefficients of Phenolic Structures in Different Solvents Routinely Used for Experiments.

Phenolic structures are of great interest due to their antioxidant properties and various postulated benefits on human health. However, the quantification of these structures in fruits and vegetables, as well as in vivo or in vitro experiments, is demanding, as relevant concentrations are often low, causing problems in exactly weighing the respective amounts. Nevertheless, the determination of used concentrations is often a prerequisite for accurate results. A possibility to quantify polyphenol is the use of UV/vis spectroscopy. Therefore, the absorption coefficients of selected phenolic structures were determined in three different solvents relevant for polyphenol research (water/methanol (50/50, v/v), water, and phosphate buffer at pH 7.5). To confirm the values based on weight and to avoid errors due to impurities, hygroscopic effects, and inadequate balance care, the mass concentrations were additionally determined by quantitative NMR (q-NMR). The coefficients presented in this article can help to quickly and easily determine accurate concentrations in a laboratory routine without wasting the often-precious standard compounds.

Rapid Approach to Determine Propionic and Sorbic Acid Contents in Bread and Bakery Products Using 1H NMR Spectroscopy.

The food additive sorbic acid is considered as an effective preservative for certain cereal products, and propionic acid is commonly added in bakery wares, e.g., bread and fine bakery wares. The aim of this study was to develop and validate a new nuclear magnetic resonance spectroscopy (1H NMR) method for the routine screening and quantification of sorbic and propionic acids in bread and several bakery products for quality control purposes. Results showed that none of the screened samples contained higher concentrations than regulatory maximum limits. However, for some samples, labelling of preservatives was lacking or they were used in food categories, for which the use is not approved. It can be concluded that the developed NMR method can be used for the routine screening of bakery products.

Fully Automated Identification of Coffee Species and Simultaneous Quantification of Furfuryl Alcohol Using NMR Spectroscopy.

BACKGROUND: Coffee is a popular beverage with two species, Coffea canephora and C. arabica, being commercially exploited. The quality and commercial value of coffee is dependent on species and processing. C. arabica typically obtains a higher price on the market compared to C. canephora. Coffee beans undergo roasting during processing, resulting in the formation of flavor compounds including furfuryl alcohol which has been classified by the International Agency for Research on Cancer as possibly carcinogenic to humans (Group 2B). OBJECTIVE: The aim of this study was to identify coffee species and other properties using nuclear magnetic resonance (NMR) spectroscopy, specifically to conduct quantification of the roasting process contaminant furfuryl alcohol. METHOD: The quantification of furfuryl alcohol was performed from the NMR spectra using the pulse length-based concentration (PULCON) methodology. Prior to NMR analysis, samples were extracted using deuterated chloroform. RESULTS: Roasting experiments identified the maximum roasting temperature to be the most significant factor in the formation of furfuryl alcohol. Among the coffee species, C. canephora was found to contain a relatively lower amount of furfuryl alcohol compared to C. arabica. The roasting of wet processed coffee resulted in higher contents of furfuryl alcohol. Geographical origin and variety within species had no influence on the furfuryl alcohol content. CONCLUSION: Validation results show that NMR spectroscopy is fit-for-purpose to obtain targeted information of coffee samples. HIGHLIGHTS: The PULCON NMR methodology allows a simple, rapid and accurate determination of constituents of coffee.

Application of 1H Nuclear Magnetic Resonance Spectroscopy as Spirit Drinks Screener for Quality and Authenticity Control.

Due to legal regulations, the rise of globalised (online) commerce and the need for public health protection, the analysis of spirit drinks (alcoholic beverages >15% vol) is a task with growing importance for governmental and commercial laboratories. In this article a newly developed method using nuclear magnetic resonance (NMR) spectroscopy for the simultaneous determination of 15 substances relevant to assessing the quality and authenticity of spirit drinks is described. The new method starts with a simple and rapid sample preparation and does not need an internal standard. For each sample, a group of 1H-NMR spectra is recorded, among them a two-dimensional spectrum for analyte identification and one-dimensional spectra with suppression of solvent signals for quantification. Using the Pulse Length Based Concentration Determination (PULCON) method, concentrations are calculated from curve fits of the characteristic signals for each analyte. The optimisation of the spectra, their evaluation and the transfer of the results are done fully automatically. Glucose, fructose, sucrose, acetic acid, citric acid, formic acid, ethyl acetate, ethyl lactate, acetaldehyde, methanol, n-propanol, isobutanol, isopentanol, 2-phenylethanol and 5-(hydroxymethyl)furfural (HMF) can be quantified with an overall accuracy better than 8%. This new NMR-based targeted quantification method enables the simultaneous and efficient quantification of relevant spirit drinks ingredients in their typical concentration ranges in one process with good accuracy. It has proven to be a reliable method for all kinds of spirit drinks in routine food control.

Validation of a Quantitative Proton Nuclear Magnetic Resonance Spectroscopic Screening Method for Coffee Quality and Authenticity (NMR Coffee Screener).

Monitoring coffee quality as a means of detecting and preventing economically motivated fraud is an important aspect of international commerce today. Therefore, there is a compelling need for rapid high throughput validated analytical techniques such as quantitative proton nuclear magnetic resonance (NMR) spectroscopy for screening and authenticity testing. For this reason, we sought to validate an 1H NMR spectroscopic method for the routine screening of coffee for quality and authenticity. A factorial experimental design was used to investigate the influence of the NMR device, extraction time, and nature of coffee on the content of caffeine, 16-O-methylcafestol (OMC), kahweol, furfuryl alcohol, and 5-hydroxymethylfurfural (HMF) in coffee. The method was successfully validated for specificity, selectivity, sensitivity, and linearity of detector response. The proposed method produced satisfactory precision for all analytes in roasted coffee, except for kahweol in canephora (robusta) coffee. The proposed validated method may be used for routine screening of roasted coffee for quality and authenticity control (i.e., arabica/robusta discrimination), as its applicability was demonstrated during the recent OPSON VIII Europol-Interpol operation on coffee fraud control.

Potential Antagonistic Effects of Acrylamide Mitigation during Coffee Roasting on Furfuryl Alcohol, Furan and 5-Hydroxymethylfurfural.

The four heat-induced coffee contaminants-acrylamide, furfuryl alcohol (FA), furan and 5-hydroxymethylfurfural (HMF)-were analyzed in a collective of commercial samples as well as in Coffea arabica seeds roasted under controlled conditions from very light Scandinavian style to very dark Neapolitan style profiles. Regarding acrylamide, average contents in commercial samples were lower than in a previous study in 2002 (195 compared to 303 µg/kg). The roasting experiment confirmed the inverse relationship between roasting degree and acrylamide content, i.e., the lighter the coffee, the higher the acrylamide content. However, FA, furan and HMF were inversely related to acrylamide and found in higher contents in darker roasts. Therefore, mitigation measures must consider all contaminants and not be focused isolatedly on acrylamide, specifically since FA and HMF are contained in much higher contents with lower margins of exposure compared to acrylamide.