Carborane-stilbene dyads: the influence of substituents and cluster isomers on photoluminescence properties.

Two novel styrene-containing meta-carborane derivatives substituted at the second carbon cluster atom (Cc) with either a methyl (Me) or a phenyl (Ph) group are introduced herein along with a new set of stilbene-containing ortho- (o-) and meta- (m-) carborane dyads. The latter set of compounds have been prepared from styrene-containing carborane derivatives via a Heck coupling reaction. High regioselectivity has been achieved for these compounds by using a combination of palladium complexes [Pd2(dba)3]/[Pd(t-Bu3P)2] as a catalytic system, yielding exclusively E isomers. All compounds have been fully characterised and the crystal structures of seven of them were analysed by X-ray diffraction. The absorption spectra of these compounds are similar to those of their respective fluorophore groups (styrene or stilbene), showing a very small influence of the substituent (Me or Ph) linked to the second Cc atom or the cluster isomer (o- or m-). On the other hand, fluorescence spectroscopy revealed high emission intensities for Me-o-carborane derivatives, whereas their Ph-o-carborane analogues evidenced an almost total lack of fluorescence, confirming the significant role of the substituent bound to the adjacent Cc in o-carboranes. In contrast, all the m-carborane derivatives display similar photoluminescence (PL) behavior regardless of the substituent attached to the second Cc, demonstrating its small influence on emission properties. Additionally, m-carborane derivatives are significantly more fluorescent than their o-counterparts, reaching quantum yield values as high as 30.2%. Regarding solid state emission, only stilbene-containing Ph-o-carborane derivatives, which showed very low fluorescence in solution, exhibited notable PL emission in films attributed to aggregation-induced emission. DFT calculations were performed to successfully complement the photoluminescence studies, supporting the experimentally observed photophysical behavior of the styrene and stilbene-containing carborane derivatives. In conclusion, in this work it is proved that it is possible to tailor the PL properties of carborane-stilbene dyads by changing the Cc substituent and the carborane isomer.

Icosahedral boron clusters: a perfect tool for the enhancement of polymer features.

Boron clusters and organic molecules display manifestly different electronic, physical, chemical and geometrical characteristics. These differences highlight the complementarity of organic synthons and boron clusters, and therefore the feasibility of producing hybrid polymers incorporating both types of fragments. This review focuses on the development of hybrid organic-inorganic π conjugated, silane, siloxane and coordination polymers containing icosahedral boron clusters in the last few decades, which have received considerable academic and technological interest due to the combination of the electronic, optical and thermal properties of traditional inorganic materials with many of the desirable properties of organic plastics, including mechanical flexibility and low production costs.

Intramolecular Communication in Anionic Oxidized Phosphanes through a Chelated Proton.

Oxidation of the 1,2-(PR2 )2 -1,2-closo-C2 B10 H10 (R=Ph, iPr) platform with hydrogen peroxide in acetone is a two-step procedure in which partial deboronation of the closo cluster and oxidation of the phosphorus atoms occur. Based on NMR spectroscopic and kinetic data, we demonstrate that the phosphorus atoms are oxidized in the first step, followed by cluster deboronation. DFT calculations and natural-bond orbital (NBO) analysis were used to obtain insight into the electronic structures of diphosphane ortho-carborane derivatives.

Synthesis, reactivity and complexation studies of N,S exo-heterodisubstituted o-carborane ligands. Carborane as a platform to produce the uncommon bidentate chelating (pyridine)N-C-C-C-s(H) motif.

The synthesis of N,S-heterodisubstituted 1-(2'-pyridyl)-2-SR-1,2-closo-C2B10H10 compounds (R = Et, 2; R = (i)Pr, 3) has been accomplished starting from 1-(2'-pyridyl)-l,2-closo-C2B10H11 (1), and their partial deboronation reaction leading to the structurally chiral [7-(2'-pyridyl)-8-SR-7,8-nido-C2B9H10]-derivatives (R = Et, [4]-; R = (i)Pr, [5]-) has been studied. Capillary electrophoresis combined with the chiral selector alpha-cyclodextrin has permitted the separation of the electrophoretically pure racemic [7-(2'-pyridyl)-8-SR-7,8-nido-C2B9H11]- ions into two peaks each one corresponding to the interaction of one enantiomer with the alpha-cyclodextrin. The N,S-heterodisubstituted o-carborane containing a mercapto group, 1-(2'-pyridyl)-2-SH-1,2-closo-C2B10H10, 1, is one of the two examples of a rigid bidentate chelating (pyridine)N-C-C-C-S(H) motif having been structurally fully characterized. To study the potential of such a binding site, 1 has been tested as a ligand with metal ions requiring different coordination numbers, two (Au(+)) and four (Pd2+ and Rh+). The crystal structures of the Pd(II) and Au(I) complexes are reported. For the Pd(II) complex, 1 acts as a bidentate ligand whereas for Au(I), 1 acts as a monodentate ligand through the thiolate.

Synthesis, characterization, and dynamic studies of 12-vertex eta5-ruthenium(II) closo-phosphine complexes with monoanionic [10-L-nido-7-R-7,8-C2B9H9]- ligands.

Ruthenacarborane complexes of formula [3-H-3,3-(PPh3)2-8-L-closo-3,1,2-RuC2B9H10)] (L = SMe2 (2a), SEt2 (2b), S(CH2)4 (2c), SEtPh (2d)) and [1-Me-3-H-3,3-(PPh3)2-8-L-closo-3,1,2-RuC2B9H9)] (L = SMe2 (2e), SEt2 (2f)) were prepared by reaction of the respective monoanionic charge-compensated ligands [10-L-nido-7,8-C2B9H10]- and [7-Me-10-L-nido-7,8-C2B9H9]- with [RuCl2(PPh3)3]. Similary, complexes [3-H-3,3,8-(PPh3)3-closo-3,1,2-RuC2B9H10)] (4a) and [3-H-3,3-(PPh3)2-8-PPh2Me-closo-3,1,2-RuC2B9H10)] (4b) were prepared from the corresponding phosphonium ligands. The reaction is done in one pot by reacting the ligand with the Ru(II) complex in a 1.5:1 ratio. All compounds have been fully characterized by multinuclear NMR spectroscopy, and the molecular structures for 2a and 4a have been elucidated by single-crystal X-ray diffraction analysis. The Ru(II) atom in this complex is on the open face of the monoanionic charge-compensated ligand adopting a pseudooctahedral coordination. Formally, three positions are supplied by the C2B3 open face, two PPh3 groups occupy two other positions, and a hydride fulfills the remaining one. The hydride complexes were generated with no special reagent. They result from a dehalogenation in the presence of ethanol.

Simple PVC-PPy electrode for pH measurement and titrations.

Cobaltabis(dicarbollide) [3,3'-Co(1,2-C2B9H11)](-)-doped polypyrrole (PPy) films have been prepared galvanostatically on glassy carbon electrodes in acetonitrile solution. The potential response behavior of the film of this new material has been investigated in some common pH buffers and in acid-base titrations. The potentiometric characteristics of the resulting films are indicative of a quasi-Nernstian response (approximately 50 mV/pH unit), a linearity range from pH 12 to 3 and correlation coefficients (r2) of approximately 0.98. The electrode is suitable for pH measurements and for monoprotic titrations of strong alkalis with strong acids, and weak bases with strong acids, but the long response time hinders the use of this electrode for multiprotic titrations. The time response has been dramatically improved by reducing the film thickness by using the template effect of a non-conducting polymer (PVC) cast over the graphite surface before PPy deposition. PPy polymerization occurs in the free channels of PVC leading to the formation of PPy wires. The morphological change of PPy does not affect the slope or linearity range. The response of the PVC-PPy electrochemical sensor is rapid and the sensor is easy to prepare, at low cost, and its performance is comparable with that of commercial glass electrodes.

Are halocarboranes suitable for substitution reactions? The case for 3-I-1,2-closo-C(2)B(10)H(11): molecular orbital calculations, aryldehalogenation reactions, (11)B NMR interpretation of closo-carboranes, and molecular structures of 1-Ph-3-Br-1,2-closo-C(2)B(10)H(10) and 3-Ph-1,2-closo-C(2)B(10)H(11).

In this paper, the chemistry of 3-X-1,2-closo-C(2)B(10)H(11) (X = halogen) derivatives is extended. Molecular orbital and (11)B and (13)C NMR calculations on these species are presented. A qualitative interpretation of the (11)B NMR spectra of closo o-carborane derivatives is also provided. The synthesis of 3-X-1-R-o-carborane (X = I, Br and R = Me, Ph) derivatives is reported, and aryldehalogenation at the B3 position is reported for the first time. The molecular and crystal structures of 1-phenyl-3-bromo-1,2-dicarba-closo-dodecaborane and 3-phenyl-1,2-dicarba-closo-dodecaborane are described.

Eta5-(3)-1-methyl-1,2-dicarbollyl-eta5-2',5'-dimethylpyrrolylcobalt(III).

In the title compound, (eta(5)-2,5-dimethylpyrrolyl)[(7,8,9,10,11-eta)-7-methyl-7,8-dicarba-nido-undecaborato]cobalt(III), [3-Co[eta(5)-[2,5-(CH(3))(2)-NC(4)H(2)]]-1-CH(3)-1,2-C(2)B(9)H(10)] or [Co(C(3)H(13)B(9))(C(6)H(8)N)], the Co(III) atom is sandwiched between the pentagonal faces of the pyrrolyl and dicarbollide ligands, resulting in a neutral molecule. The C-C distance in the dicarbollide cage is 1.649 (3) A.

Comparative study of NS(2)(S-aryl) pyridine-based dithia-containing ligands with different substituent groups. Reactivity toward Cu(II) and Ru(II).

Ligands LX of the type NS(2) with S-aryl substituents which incorporate the unit 2,6-bis(thiomethyl)pyridine modified with functional groups bonded to the aromatic moieties, either on the phenyl or on the pyridine, are produced. Electron-withdrawing groups, 3-chloro and 4-nitro, that reduce the pyridine basicity have been introduced. Methoxy or methoxycarbonyl substituents have been incorporated on the thiophenyl moieties. The comparative results from the reaction of these ligands with Cu(ClO(4))(2).6H(2)O and [RuCl(2)(PPh(3))(3)] have revealed that their coordination capacity has not been greatly modified as a result of the introduced groups. Complexes of general formulas [Cu(LX)][ClO(4)](2), except for L5, and [RuCl(2)(LX)(PPh(3))], have been obtained, respectively. The electronic characteristics of these complexes have been studied by cyclic voltammetry experiments. The structures of 2,6-bis[(2'-methoxycarbonyl)phenylthio-methyl]-4-nitropyridine (L5) and [RuCl(2)(L5)(PPh(3))].2CCl(4) have been characterized by single-crystal X-ray diffraction methods.

Contribution of the nido-[7,8-C2B9H10]- anion to the chemical stability, basicity, and 31P NMR chemical shift in nido-o-carboranylmonophosphines.

The icosahedral dicarboranes and their decapitated anion, 1-R'-1,2-C(2)B(10)H(10) (closo) and [7-R'-7,8-C(2)B(9)H(10)](-) (nido), exert a distict influence at the alpha position of substituents attached to the cage carbon atom. The closo fragment is electron-withdrawing while the nido anion is electron-releasing. These effects are studied by (31)P NMR, phosphorus oxidation, and phosphorus protonation in [7-PR(2)-8-R'-7,8-C(2)B(9)H(10)](-) species. The (31)P NMR chemical shift dependence is related to the R alkyl or aryl nature of [7-PR(2)-8-R'-7,8-C(2)B(9)H(10)](-). No direct relationship to the nature of the R substituent on the nido-carboranylmonphosphine toward oxidation has been found. The basicity of the nido-alkylcarboranylmonophosphines is the highest while the lowest corresponds to the nido-arylcarboranylmonophosphines. Interpretation can be carried out qualitatively by considering the electronic properties of the cluster and the nature of the R groups. The influence of R' is less relevant. Confirmation of the molecular structure of the oxidated and protonated nido-carboranylmonophosphine compounds was obtained by X-ray diffraction analysis of [NBu(4)][7-P(O)Ph(2)-8-Ph-7,8-C(2)B(9)H(10)] and [7-PH((i)Pr)(2)-8-Me-7,8-C(2)B(9)H(10)].

Unusual 9-->10 rearrangement of the substituted cage carbon in the ferratricarbollide series. Synthesis of the isomeric complexes [2-eta 5-(C5H5)-10-X-closo-2,1,7,10-FeC3B8H10] (where X = H2N, MeHN, Me2N, and ButHN).

Treatment of the zwitterionic amine tricarbollides of general formula 7-L-nido-7,8,9-C3B8H10 (1) (where L = Me2HN (1c) and ButH2N (1d)) with [(eta 5-C5H5)Fe(CO)2]2 in refluxing mesitylene resulted in the formation of a mixture of the known compounds [2-(eta 5-C5H5)-9-X-closo-2,1,7,9-FeC3B8H10] (2) (where X = H2N (2a), Me2N (2c), and ButHN (2d)) and a series of new, isomeric ferratricarbollylamines [2-(eta 5-C5H5)-10-X-closo-2,1,7,10-FeC3B8H10] (3) (where X = H2N (3a), Me2N (3c), and ButHN (3d)) in moderate yields. Complexes of type 3 (where X = H2N (3a), MeHN (3b), Me2N (3c), and ButHN (3d)) were also obtained readily by heating complexes of type 2 (where X = H2N (2a), MeHN (2b), Me2N (2c), ButHN (2d), and Bu(t)(Me)N (2e)) at ca. 300 degrees C for 10 min. All the complexes of type 3 contain reactive amine functions in meta positions with respect to the metal center. The observed 9-->10 rearrangement of the substituted cluster carbon is quite unexpected and is believed to result from higher thermodynamic stability of the 10-substituted isomers. The structures of all compounds of type 3 were established by high-field NMR spectroscopy and mass spectrometry, and that of 3d was determined by an X-ray diffraction study.