Characterization of hierarchical α-MoO3 plates toward resistive heating synthesis: electrochemical activity of α-MoO3/Pt modified electrode toward methanol oxidation at neutral pH.

The growth of MoO3 hierarchical plates was obtained by direct resistive heating of molybdenum foils at ambient pressure in the absence of any catalysts and templates. Plates synthesized after 60 min resistive heating typically grow in an single-crystalline orthorhombic structure that develop preferentially in the [001] direction, and are characterized by high resolution transmission electron microscopy, selected area diffraction pattern and Raman-scattering measurements. They are about 100-200 nm in thickness and a few tens of micrometers in length. As heating time proceeds to 80 min, plates of α-MoO3 form a branched structure. A more attentive look shows that primary plates formed at until 60 min could serve as substrates for the subsequent growth of secondary belts. Moreover, a full electrochemical characterization of α-MoO3 plates on platinum electrodes was done by cyclic voltammetric experiments, at pH 7 in phosphate buffer, to probe the activity of the proposed composite material as anode to methanol electro-oxidation. Reported results indicate that Pt MoO3 modified electrodes are appropriate to develop new an amperometric non-enzymatic sensor for methanol as well as to make anodes suitable to be used in direct methanol fuel cells working at neutral pH.

Photodynamic activity of thiophene-derived lysosome-specific dyes.

The photodynamic activity occurring through the lysosome photo-damage is effective in terms of triggered synergic effects which can avoid chemo-resistance pathways. The potential photodynamic activity of two fluorescent lysosome-specific probes was studied providing their interaction with human serum albumin, demonstrating their in vitro generation of singlet oxygen and investigating the resulted photo-toxic effect in human cancer cells.

A novel nonenzymatic amperometric hydrogen peroxide sensor based on CuO@Cu2O nanowires embedded into poly(vinyl alcohol).

A new, very simple, rapid and inexpensive nonenzymatic amperometric sensor for hydrogen peroxide (H2O2) detection is proposed. It is based on the immobilization of cupric/cuprous oxide core shell nanowires (CuO@Cu2O-NWs) in a poly(vinyl alcohol) (PVA) matrix directly drop casted on a glassy carbon electrode surface to make a CuO@Cu2O core shell like NWs PVA embedded (CuO@Cu2O-NWs/PVA) sensor. CuO nanowires with mean diameters of 120-170nm and length in the range 2-5µm were grown by a simple catalyst-free thermal oxidation process based on resistive heating of pure copper wires at ambient conditions. The oxidation process of the copper wire surface led to the formation of a three layered structure: a thick Cu2O bottom layer, a CuO thin intermediate layer and CuO nanowires. CuO nanowires were carefully scratched from Cu2O layer with a sharp knife, dispersed into ethanol and sonicated. Then, the NWs were embedded in PVA matrix. The morphological and spectroscopic characterization of synthesized CuO-NWs and CuO@Cu2O-NWs/PVA were performed by transmission electron microscopy (TEM), selected area diffraction pattern (SAD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analysis. Moreover a complete electrochemical characterization of these new CuO@Cu2O-NWs/PVA modified glassy carbon electrodes was performed by Cyclic Voltammetry (CV) and Cronoamperometry (CA) in phosphate buffer (pH=7; I=0.2) to investigate the sensing properties of this material against H2O2. The electrochemical performances of proposed sensors as high sensitivity, fast response, reproducibility and selectivity make them suitable for the quantitative determination of hydrogen peroxide substrate in batch analysis.

Te oxide nanowires as advanced materials for amperometric nonenzymatic hydrogen peroxide sensing.

A new nonenzymatic platinum Te oxide nanowires modified electrode (Pt/TeO2-NWs) for amperometric detection of hydrogen peroxide (H2O2) is proposed. The modified electrode has been developed by direct drop casting, with TeO2 nanowires (TeO2-NWs), synthesized by thermal evaporation of Te(0) in an oxygen atmosphere. The morphological and spectroscopic characterization of the TeO2-NWs as synthesized on Pt foil was performed by scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis. XPS and XRD analyses are especially involved to gain information on the chemical environment of TeO2-NWs in contact with Pt surface. Moreover electrochemical characterization of these new modified Pt/TeO2-NWs modified electrodes was performed by Cyclic Voltammetry (CV) and Cronoamperometry (CA) in phosphate buffer (pH=7; I=0.2) to investigate the sensing properties of this material against H2O2. The proposed sensor exhibits a wide linear and dynamic range from 2 µM to 16 mM (R(2)=0.9998) and the detection limit is estimated to be 0.6 µM (S/N=3). Moreover, this sensor shows a rapid amperometric response time of less than 5s and possessed good reproducibility. These results indicate that Pt/TeO2-NWs composite is suitable to be used as material for sensing applications.

Photoconductivity of packed homotype bundles formed by aligned single-walled carbon nanotubes.

Photoconductivity properties of aggregated single-walled carbon nanotubes have been studied by performing measurements on macroscopic ribbons, obtained by the aggregation of a large number of SWCNT bundles. Structural analysis performed by electron diffraction revealed that the nanotubes forming each bundle have the same chirality. The experimental results, regarding the region 1.2-3.6 eV and the pressure range 10(3)-10(-3) mbar, suggest that the photoexcitation of nanotubes, packed in bundles and organized in ribbons, generates electron-hole pairs within a band structure and that bond excitons are formed by Coulomb interactions between spatially confined charge carriers.

Thermally stimulated current investigation of copper octaethylporphyrin dimer Langmuir-Blodgett films.

Langmuir-Blodgett films containing meso,meso'-buta-1,3-diyne-bridge Cu(II) octaethylporphyrin dimer have been deposited with the aim of carrying out a thermally stimulated current (TSC) investigation. This characterization was obtained upon cooling samples irradiated by light and others without irradiation: in this way TSC curves have been registered in the temperature range of 100-300 K. Analysis of experimental data has been performed through the application of three different approaches: the initial rate, the heating rate, and Chen's methods. In particular, a trap center at about 0.38 eV has been evidenced and the three different methods have given results in close accordance.