RESUMO
OBJECTIVES: The aim of this study was to evaluate the performance of a commercially available chairside amalgam separator (CAS) in a clinical setting in which a relatively high number of amalgam restorations are placed. Performance parameters investigated included service life, amalgam collected, mercury concentrations in effluent, and solids retention efficiency. METHODS AND MATERIALS: CASs were tested per International Organization of Standardization (ISO) 11143:2008 prior to installation in a military dental treatment facility and after removal from service (n=4) in order to confirm compliance with the recently enacted United States Environmental Protection Agency (EPA) Effluent Limitations Guidelines and Standards for the Dental Category. During the units' time in service, biweekly effluent grab samples were collected from the high-volume evacuation system of each chair (n=6) and analyzed for total mercury concentration by inductively coupled plasma mass spectrometry (ICP-MS). The mean total accumulated solids at the end of service life (n=6) was determined for potential design optimization. The service life expectancy in a military dental treatment facility was determined in terms of calendar and workdays. Procedural data were collected to determine the daily mean number of amalgam surfaces placed during the service life of each chairside amalgam separator (n=9). RESULTS: The CAS evaluated met minimum EPA compliance requirements when used in a military dental treatment facility. The solids removal efficiency at the end of service life was 99.82% ± 0.14% (n=4). The mean service life (n=8) was 131.6 ± 45.1 calendar days (67.1±37.6 workdays). Effluent mercury concentrations ranged from 0.05 to 11.93 mg/L. Total solids accumulated in each CAS (n=6) at the end of service life was 195.4 ± 63.4 g. The mean number of amalgam surfaces placed per workday during the service life span of each CAS was 8.4 ± 1.4.
