Direct evaluation of influence of electron damage on the subcell performance in triple-junction solar cells using photoluminescence decays.

Tandem solar cells are suited for space applications due to their high performance, but also have to be designed in such a way to minimize influence of degradation by the high energy particle flux in space. The analysis of the subcell performance is crucial to understand the device physics and achieve optimized designs of tandem solar cells. Here, the radiation-induced damage of inverted grown InGaP/GaAs/InGaAs triple-junction solar cells for various electron fluences are characterized using conventional current-voltage (I-V) measurements and time-resolved photoluminescence (PL). The conversion efficiencies of the entire device before and after damage are measured with I-V curves and compared with the efficiencies predicted from the time-resolved method. Using the time-resolved data the change in the carrier dynamics in the subcells can be discussed. Our optical method allows to predict the absolute electrical conversion efficiency of the device with an accuracy of better than 5%. While both InGaP and GaAs subcells suffered from significant material degradation, the performance loss of the total device can be completely ascribed to the damage in the GaAs subcell. This points out the importance of high internal electric fields at the operating point.

Charge Injection Mechanism at Heterointerfaces in CH3NH3PbI3 Perovskite Solar Cells Revealed by Simultaneous Time-Resolved Photoluminescence and Photocurrent Measurements.

Organic-inorganic hybrid perovskite solar cells are attracting much attention due to their excellent photovoltaic properties. In these multilayered structures, the device performance is determined by complicated carrier dynamics. Here, we studied photocarrier recombination and injection dynamics in CH3NH3PbI3 perovskite solar cells using time-resolved photoluminescence (PL) and photocurrent (PC) measurements. It is found that a peculiar slowdown in the PL decay time constants of the perovskite layer occurs for higher excitation powers, followed by a decrease of the external quantum efficiency for PC. This indicates that a carrier-injection bottleneck exists at the heterojunction interfaces, which limits the photovoltaic performance of the device in concentrator applications. We conclude that the carrier-injection rate is sensitive to the photogenerated carrier density, and the carrier-injection bottleneck strongly enhances recombination losses of photocarriers in the perovskite layer at high excitation conditions. The physical origin of the bottleneck is discussed based on the result of numerical simulations.

Internal luminescence efficiencies in InGaP/GaAs/Ge triple-junction solar cells evaluated from photoluminescence through optical coupling between subcells.

In-situ characterization is one of the most powerful techniques to improve material quality and device performance. Especially in view of highly efficient tandem solar cells this is an important issue for improving the cost-performance ratio. Optical techniques are suitable characterization methods, since they are non-destructing and contactless. In this work, we measured the power dependence of photoluminescence (PL) from the InGaP and GaAs subcells of an industry-standard triple-junction solar cell. High luminescence yields enhance the luminescence coupling, which was directly verified by time-resolved PL measurements. We present a new method to determine the internal luminescence efficiencies of InGaP and GaAs subcells with the aid of luminescence coupling. High luminescence efficiencies of 90% for GaAs and more than 20% for InGaP were found, which suggest that the material quality of the grown GaAs layer is excellent while the intrinsic luminescence limit of InGaP is still not reached even for high excitation conditions. The PL method is useful for probing the intrinsic material properties of the subcells in flat band condition, without influence of transport. Since no calibration of absolute PL is required, a fast screening of the material quality is possible, which should be extremely helpful for the solar cell industry.

Optical characterization of voltage-accelerated degradation in CH3NH3PbI3 perovskite solar cells.

We investigate the performance degradation mechanism of CH3NH3PbI3 perovskite solar cells under bias voltage in air and nitrogen atmospheres using photoluminescence and electroluminescence techniques. When applying forward bias, the power conversion efficiency of the solar cells decreased significantly in air, but showed no degradation in nitrogen atmosphere. Time-resolved photoluminescence measurements on these devices revealed that the application of forward bias in air accelerates the generation of non-radiative recombination centers in the perovskite layer buried in the device. We found a negative correlation between the electroluminescence intensity and the injected current intensity in air. The irreversible change of the perovskite grain surface in air initiates the degradation of the perovskite solar cells.

Charge separation in subcells of triple-junction solar cells revealed by time-resolved photoluminescence spectroscopy.

We measure the excitation-wavelength and power dependence of time-resolved photoluminescence (PL) from the top InGaP subcell in a InGaP/GaAs/Ge triple-junction solar cell. The wavelength-dependent data reveals that the PL decays are governed by charge separation. A fast single-exponential PL decay is observed at low excitation power densities, which is the charge separation under short-circuit condition. Under strong excitation a bi-exponential PL decay is observed. Its slow component appears at early times, followed by a faster component at late times. The slow decay is the carrier recombination of the subcell. The following fast component is the charge separation process under reduced built-in potential near the operating point. The subcells electrical conversion efficiency close to the operating point is evaluated using this decay time constant.

Control of hot-carrier relaxation for realizing ideal quantum-dot intermediate-band solar cells.

For intermediate-band solar cells, the broad absorption spectrum of quantum dots (QDs) offers a favorable conversion efficiency, and photocurrent generation via efficient two-step two-photon-absorption (TS-TPA) in QDs is essential for realizing high-performance solar cells. In the last decade, many works were dedicated to improve the TS-TPA efficiency by modifying the QD itself, however, the obtained results are far from the requirements for practical applications. To reveal the mechanisms behind the low TS-TPA efficiency in QDs, we report here on two- and three-beam photocurrent measurements of InAs quantum structures embedded in AlGaAs. Comparison of two- and three-beam photocurrent spectra obtained by subbandgap excitation reveals that the QD TS-TPA efficiency is improved significantly by suppressing the relaxation of hot TS-TPA carriers to unoccupied shallow InAs quantum structure states.