Emissions from baled municipal solid waste: II. Effects of different treatments and baling techniques on the emission of volatile organic compounds.

This paper focuses on the volatile organic compound emissions from baled municipal solid waste (MSW). The analytical methodology was based on sampling with adsorbent tubes once a month during seven occasions within a time period of 1 year. Automated analyses were carried out on-line work-up with thermal desorption directly connected to a gas chromatograph-mass spectrometer. The effect of different baling techniques, cylindrical and rectangular baling was compared. It was found that cylindrically baled MSW emitted larger concentration of esters than their rectangular counter parts. Conversely, aromatic compounds emissions dominated in rectangularly baled MSW. This indicates that different degradation mechanisms operate in the waste bales. Cylindrical and rectangular bales are generally wrapped with six layers of 250 microm thick low density polyethylene (LDPE). It was observed that by wrapping an extra six layers of LDPE film onto the bales, the emissions from cylindrical bales increased while emissions from the rectangular counterpart decreased. Over time, the volatile organic compound emissions from cylindrical bales decreased two orders of magnitudes from 96.2 +/- 20.8 microg m(-3) in September 2003 to 0.80 +/- 0.07 microg m(-3) in July 2004. The rectangular bales exhibited an almost identical relative emission reduction from 54.4 +/- 4.3 microg m(-3) in September 2003 to 0.46 +/- 0.02 microg m(-3) in July 2004. Future work will concentrate on full-scale storages, taking into account waste type, storage size, temperature development and the different baling techniques among other variables.

Emissions from baled municipal solid waste: I. Methodological approach for investigation of gaseous emissions.

This paper presents a methodological approach for the study of volatile organic compounds (VOCs) in air, emitted during storage of municipal solid waste in bales. Determination of VOCs was based on sampling with adsorbent tubes followed by automated analysis using on-line work-up with a thermal desorption unit directly connected to a gas chromatograph-mass spectrometer. Using calculation algorithms and multidimensional statistical analysis of large amounts of data collected, the information was compressed and visualized. The approach was applied to initial measurements of emissions of VOCs from 24 bales composed of municipal solid waste, each bale stored in a wooden box. These bales were produced using the two types of baling equipment available, resulting in cylindrical or rectangular bales, with different densities. Hundreds of different VOCs emitted from these bales sorted out into groups with different chemical structure. Differences in VOC concentrations in air were found between wastes stored in cylindrical or rectangular bales. For instance, it was found that the concentration of VOCs (relative to the concentration of toluene), in the first experiment after storing, for cylindrical bales with six layers of LDPE was 115 +/- 10 microg m(-3), while for rectangular bales it was only 64 +/- 8 microg m(-3). The procedure used for data interpretation suggested different degradation mechanisms in different types of bales. The use of multiple data interfaces, multidimensional statistics and automated chemical analysis methods are likely to be more and more common for waste companies and waste research in the near future. This is due to the interdisciplinary nature of the subject that relies heavily on various areas of science and information technology.

Development of a combined solid-phase extraction-supercritical fluid extraction procedure for the determination of polychlorinated biphenyls in wastewater.

A combined solid-phase extraction (SPE)-supercritical fluid extraction (SFE) procedure was developed for the analysis of polychlorinated biphenyls (PCBs) in wastewater. The importance of cleaning and drying the filters and SPE-disks prior to eluting PCBs with SFE was studied, leading to improved recoveries for all congeners investigated. The average PCB recovery of the final procedure, at a concentration of 18 ng/L in reagent water, was 101% with relative standard deviations ranging from 1 to 5% for the different congeners. Spiked leachate to a final concentration of 4 ng/L was extracted directly after spiking, or after 24 h of spiking. An average recovery of 112% was obtained in the direct extraction of spiked leachate.

The performance of a natural treatment system for landfill leachate with special emphasis on the fate of organic pollutants.

A natural treatment system for the treatment of leachate was studied at Moskogen landfill in southern Sweden. This facility consists of three consecutive ponds and a soil-plant (SP)-system. A test area, receiving water from the third pond with the same hydraulic load as the SP-system, was used for estimation of the latter system. Quality parameters including biochemical oxygen demand, total organic carbon, ammonium, nitrate, orthophosphate, and total suspended solids along the treatment line were determined as well as soluble metals (Cu, Cd, Zn, Cr, Ni, and Pb). In addition a thorough investigation along the treatment line has also been performed concerning volatile organic compounds and semi-volatile organic compounds. Non-polar organic compounds were investigated using gas chromatography-mass spectrometry. Quantification was based on the assumption of equal response for the compounds found in comparison with the chosen marker substances. For polar, water-soluble compounds the measurements were restricted to phenolic compounds using high-performance liquid chromatography. Several different types of organic compounds were found in the raw leachate including aromatics, benzene-sulfonamides, biphenyls, naphthalene, organic phosphates, polycyclic aromatic hydrocarbons, polychlorinated biphenyls, phenols and phthalates. The treatment system efficiently reduced organic pollutants, heavy metals, and nitrogen/phosphorous compounds. Most metals and organic compounds in the leachate were already significantly reduced to a low level in the treatment ponds and ammonium-N was efficiently transformed to nitrate-N in the SP-system.

Development of a solid-phase extraction method for the determination of polychlorinated biphenyls in water.

Polychlorinated biphenyls (PCBs) in water were extracted with a rebuilt extraction unit using 47 mm C18 solid-phase extraction (SPE) disks. Three types of disks (SPEC, ENVI and Empore) were investigated for the extraction of seven PCBs from 11 reagent water spiked at two concentration levels (20 and 1000 ng/l). The Empore disks produced the best analyte recoveries (91-107% with R.S.D. of 1-8%) at the low concentration level and displayed no leaking tendency. Empore disks were therefore considered superior to ENVI and SPEC disks for the conditions outlined in this work. The obtained extracts were dried and purified in an additional clean-up step using custom-made columns containing Florisil and Na2SO4. For water containing large amounts of organic matter, a pre-filtration was included. Final analysis was carried out on a dual-column GC-electron-capture detection system with on-column injection. The optimised extraction method, including clean-up, was less time-consuming and used less hazardous organic solvents than conventional liquid-liquid extraction (LLE) methods. Recoveries were 92-102% with R.S.D. of 3-8%.

Design of a reverse osmosis plant for leachate treatment aiming for safe disposal.

Leachate treatment is one of the major environmental issues faced by landfill owners. One promising method for reduction of pollutant discharge is reverse osmosis (RO). RO technology was tested at a pilot plant at Hedeskoga Landfill in southern Sweden. This landfill receives municipal solid waste (MSW) and industrial, commercial and institutional (IC&I) waste, and produces about 3000 m3/ha of leachate annually. Annual variations in the volume of leachate produced, estimated from changes in leachate electrical conductivity, were relatively small and should therefore have a minor effect on the main performance parameter of an RO plant, i.e., the achievable volume reduction. The volume reduction (V(permeate)/V(feed)) of polluted water achieved in batch experiments with 200-1000 litres of raw leachate was more than 80% (4MPa) and the remaining 20% was left as retentate. However, raw leachate caused severe fouling problems in a continuous flow run and after 24 hours, the flux had decreased to about 20% of the initial value. By pre-treating the leachate in a storage pond combined with a wetland, the situation was significantly improved and the decrease in membrane flux was only 0.2% per hour during a 200 hour run. The retention in terms of total solids and chemical oxygen demand was 90%, and for ammonia, it was 82%, at a volume reduction of 50%. The HELP-model was used for prediction of the water balance for the Hedeskoga landfill, with special focus on estimation of potential evapotranspiration. With different types of vegetation and a volume reduction of 75% in the RO plant, it was found possible to achieve safe disposal by irrigating 25% to 40% of the leachate-producing landfill area with pre-treated leachate. Pre-treatment with wetlands and nature based systems reduce the need of detergents for cleaning of the membranes and water only can be used. Short pre-treatment by aeration is not sufficient to bring leachate to a condition sustainable for RO-treatment. In that case, it was found necessary with alkaline-acid-alkaline treatment to restore the permeability. The total treatment cost for a full scale treatment plant at Hedeskoga was estimated to be approximately 30 SEK/m3, of which 25 is capital and 5 is operational costs. This can be compared to the total treatment costs for municipal sewage in Sweden, which is 8 SEK/m3.

Supercritical fluid extraction of a lignocellulosic hydrolysate of spruce for detoxification and to facilitate analysis of inhibitors.

This work describes a novel approach to detoxify lignocellulosic hydrolysates and facilitate the analysis of inhibitory compounds, namely supercritical fluid extraction (SFE). The efficiency of the fermentation of lignocellulosic dilute-acid hydrolysates depends upon the composition of the hydrolysate and the organism used. Furthermore, it has been shown that inhibitors in the hydrolysate reduce the fermentation yield. This knowledge has given rise to the need to identify and remove the inhibiting compounds. Sample clean-up or work-up steps, to provide a clean and concentrated sample for the analytical system, facilitate the characterization of inhibitors, or indeed any compound in the hydrolysates. Removal of inhibitors was performed with countercurrent flow supercritical fluid extraction of liquid hydrolysates. Three different groups of inhibitors (furan derivatives, phenolic compounds, and aliphatic acids) and sugars were subsequently analyzed in the hydrolysate, extracted hydrolysate, and extract. The effect of the SFE treatment was examined with respect to fermentability with Saccharomyces cerevisiae. Not only did the extraction provide a clean and concentrated sample (extract) for analysis, but also a hydrolysate with increased fermentability as well as lower concentrations of inhibitors such as phenolics and furan derivatives.

Effects of serotonin and serotonin antagonists on chick embryogenesis.

Serotonin and some selected substances known to interfere with its formation (diethyldithiocarbamate) and function (Catron®, 5-methyltryptamine, promethazine) were tested for their ability to affect chick embryo morphogenesis during the first 48 h of development. To detect possible differences in sensitivity between the successive morphogenetic events taking place during this period, the treatment was begun at successively more advanced stages corresponding to embryo ages of between 4 and 30 h incubation. In all cases, the treatment was terminated at an embryo age of 48 h incubation. The treatment was performed both in ovo and in vitro.With some exceptions, the substances induced malformations of the same characteristic types. The developmental processes subjected to disturbances included blastoderm expansion, primitive streak formation, neurulation with brain formation, and somitogenesis. At the cellular level, the malformations can be traced to delayed yolk degradation, impaired formation and function of microvilli, and impaired ability of the embryo cells to change shape.All of the tested chemicals can be expected to interfere with intracellular levels of serotonin. They obviously interfered with decomposition of the yolk granules, recognized centres for intracellular serotonin formation and we therefore conclude that the observed morphogenetical disturbances are ultimately due to impairment of the endogenous serotonin formation. We suggest that, in morphogenesis, serotonin primarily promotes the activity of microtubules and microfilaments.