Superior bone fixation of conical compared with hemispherical trapezial cup design: an experimental radiostereometry study.

PURPOSE: The most used cup designs for trapeziometacarpal (TMC) arthroplasty are of hemispherical and conical geometrical shape. Using a validated pig bone model, we compared the bone fixation using radiostereometry (RSA). METHODS: Twenty saddle-shaped pig forefoot bones were prepared with insertion of bone markers and reaming. Hemispherical Type T cups (Beznoska, Kladno, Czech Republic) (N = 10) and conical Moovis cups (Stryker, Pusignan, France) (N = 10) of 9-mm diameter were inserted press-fit. The bones were fixed in cement blocks for stability, and the cups were loaded in a motorized test stand. First, a low-pressure cyclic load test (0-150N) with 130 compression cycles was performed. Next, a push-in test of progressive loads with 50N increments (range: 150-900N) was applied until a visual change in cup position appeared. Cup migration was evaluated with RSA after every new load application. Cup failure was defined as total translation > 0.5 mm between two load applications. RESULTS: Both cup types tolerated a compression load of 450 N without failure. Beyond this load level, the total translation cup migration of mean 0.20 mm (95% CI 0.11; 0.30) for the Type T group was higher than mean 0.10 mm (95% CI 0.06; 0.15) of the Moovis group (p = 0.046). The Hazard ratio for failure was 0.52 (95% CI 0.12; 2.17) (p = 0.37), indicating that the risk of failure was two-fold higher in the Type T group. CONCLUSION: We conclude that conical TMC cups have superior fixation as compared to hemispherical cups above a loading level of 450 N, which correspond to a 3.8 kg tip-pinch. In a clinical perspective, based on the fixation strength of both cup types, it seems safe to allow light-load activities of daily living such as buttoning a shirt and using a key shortly after surgery and until sufficient osseointegration is achieved.

No effect of hydroxyapatite-coated sliding hip screw threads on screw migration in the femoral head/neck of pertrochanteric fractures: a randomized controlled trial using radiostereometric analysis.

INTRODUCTION: Cut-out is the most frequently reported mechanical failure of internal fixation of pertrochanteric fractures. The purpose of this study was to examine if hydroxyapatite-coated screw thread on a sliding hip screw (SHS) could reduce screw migration within the femoral head in patients with stable pertrochanteric fractures. MATERIALS AND METHODS: In a double-blinded randomized controlled study, 37 patients at mean age 78 (range 56-96), with pertrochanteric fracture (Evans I, II, IV) received surgery with a SHS with a hydroxyapatite-coated or a non-coated lag screw thread. Radiostereometry and standard radiographs were obtained 1 day, 6 weeks, 3- and 6 months post-operatively to evaluate screw and fracture migration and fracture reposition. The two groups were combined to describe fracture migration. RESULTS: There was similar and small screw migration in the femoral head between the two groups at 6 weeks, 3- and 6 months (p > 0.12). Fracture migration occurred predominantly in the first 6 weeks, where fracture impaction was 5.95 mm (CI 95% 2.87 to 9.04) and anterior rotation of the femoral head was -2.94° (CI 95% - 5.22 to - 0.66). Migration of the fracture (total translation) correlated to the post-operative fracture reposition (p = 0.002), but not significantly to screw migration (p = 0.09). Neither screw total translation (rho 0.06, p = 0.79) nor fracture total translation (rho 0.04, p = 0.77) correlated with bone mineral density. CONCLUSION: There was no clinical benefit of hydroxyapatite coating on lag screw migration in this patient cohort. Migration of the pertrochanteric fractures was higher with poor fracture reposition but fractures generally stabilized after 6 weeks follow-up. The study was registered at ClinicalTrials.gov (NCT05677061). LEVEL OF EVIDENCE II: Patient-blinded prospective randomized study. Trial registration number The study was registered at ClinicalTrials.gov (NCT05677061).

Normal Values of Distal Radioulnar Joint Kinematics during a Dynamic Press Test.

Background Measurement of in vivo distal radioulnar joint (DRUJ) pathomechanics during simple activities can represent the disability experienced by patients and may be useful in diagnostics of DRUJ instability. A first step is to describe the physiological normal limits for DRUJ kinematics in a reproducible and precise test setup, which was the aim of this study. Methods DRUJ kinematics were evaluated in 33 participants with dynamic radiostereometry (RSA) while performing a standardized press test examination. AutoRSA software was used for image analyses. Computed tomography (CT) forearm bone models were generated, and standardized anatomical axes were applied to estimate kinematic outcomes including, DRUJ translation, DRUJ position ratio, and changes in ulnar variance. Repeatability of dynamic RSA press test double examinations was evaluated to estimate the precision and intraclass correlation coefficient (ICC) test-retest agreement. Results The maximum force during the press test was 6.0 kg (95% confidence interval [CI]: 5.1-6.9), which resulted in 4.7 mm (95% CI: 4.2-5.1) DRUJ translation, DRUJ position ratio of 0.40 (95% CI: 0.33-0.44), and increase in ulnar variance of 1.1 mm (95% CI: 1.0-1.2). The mean maximum DRUJ translation leveled off after a 5 kg force application. The DRUJ translation ICC coefficient was 0.93 within a prediction interval of ± 0.53mm. Conclusions This clinical study demonstrates the normal values of DRUJ kinematics and reports excellent agreement and high precision of the press tests examination using an automated noninvasive dynamic RSA imaging method based on patient-specific CT bone models. The next step is the application of the method in patients with arthroscopic verified triangular fibrocartilage complex injuries. Level of Evidence This is a Level IV, case series study.

Early offset-increasing migration predicts later revision for humeral head resurfacing implants. A randomized controlled radiostereometry trial with 10-year clinical follow-up.

In a randomized controlled setting, medium-term implant migration and long-term clinical outcomes were compared for the Copeland and the Global C.A.P. humeral head resurfacing implants (HHRI). Thirty-two patients (mean age 63 years) were randomly allocated to a Copeland (n = 14) or Global C.A.P. (n = 18) HHRI. Patients were followed for 5 years with radiostereometry, Constant Shoulder Score, and the Western Ontario Osteoarthritis of the Shoulder Index (WOOS). WOOS and revision status were also obtained cross-sectionally at a mean 10-year follow-up. At the 5-year follow-up, total translation (TT) was 0.75 mm (95% confidence interval [CI]: 0.53-0.97) for the Copeland HHRIs and 1.15 mm (95% CI: 0.85-1.46) for the Global C.A.P. HHRIs (p = 0.04), but the clinical scores were similar at all follow-ups. The cumulative risks of revision at 5 and 10 years were 29% and 43% for Copeland and 35% and 41% for Global C.A.P HHRIs (p > 0.7). No implants were loose at revision, but HHRIs that were later revised followed an early offset-increasing migration pattern with medial translation and lift-off resulting in a mean 0.53 mm (95% CI: 0.18-0.88) higher TT at the 1-year follow-up compared to non-revised HHRIs. In conclusion, the Global C.A.P. HHRI had higher TT compared with the Copeland HHRI, but clinical scores and revision rates were similar. Nonetheless, revision rates were high and challenge the use of HHRIs. Interestingly, an early radiostereometry evaluated HHRI migration pattern with increased off-set predicted later implant revision.

Less polyethylene wear in monobloc compared to modular ultra-high-molecular-weight-polyethylene inlays in hybrid total knee arthroplasty: A 5-year randomized radiostereometry study.

BACKGROUND: A modular polyethylene (PE) inlay in total knee arthroplasty (TKA) may wear on both sides. PE particles may induce osteolysis, which can lead to implant loosening. The aim of this study was to determine if PE wear in monobloc TKA differs from that ofmodular TKA at 60-month follow-up. PATIENTS AND METHODS: In a prospective, patient-blinded trial, 50 patients were randomized to hybrid TKA surgery with either acementless high-porosity trabecular-metal tibial component with a monobloc UHMWPE inlay (MONO-TM) or a cementless low-porosity screw-augmented titanium fiber-mesh tibial component with a modular UHMWPE inlay (MODULAR-FM). Radiostereometry was used to measure PE wear and tibial component migration. RESULTS: At 60-monthfollow-up, mean PE wear of the medial compartment was 0.24 mm and 0.61 mm and mean PE wear of the lateral compartment was 0.31 mm and 0.82 mm for the MONO-TM and the MODULAR-FM groups, respectively (p < 0.01). The PE wear-rate was 0.05 mm (95% CI 0.03-0.08) in the MONO-TM group and 0.14 mm (95% CI 0.12-0.17) in the MODULAR-FM group (p < 0.01). Total translation at 60 months was mean 0.30 mm (95% CI 0.10-0.51) less (p < 0.01) for MONO-TM compared with MODULAR-FM tibial components. The majority of tibial components were stable (<0.2 mm MTPM) from 12 to 24-month and 24 to 60-month follow-up. CONCLUSION: At mid-term follow-up, monobloc PE inlay wear was approximately 40% of that of the modular PE inlay wear, which suggest that back-side wear of modular PE inlays is a significant contributor of PE wear in hybrid TKA.

Distal radioulnar joint stabilization with open foveal reinsertion versus tendon graft reconstruction: an experimental study using radiostereometry.

PURPOSE: Symptomatic instability of the distal radioulnar joint (DRUJ) caused by lesion of the Triangular Fibrocartilage Complex (TFCC) can be treated with a number of surgical techniques. Clinical examination of DRUJ translation is subjective and limited by inter-observer variability. The aim of this study was to compare the stabilizing effect on DRUJ translation with two different surgical methods using the Piano-key test and a new precise low-dose, non-invasive radiostereometric imaging method (AutoRSA). METHODS: In a randomized experimental study we evaluated the DRUJ translation in ten human cadaver arms (8 males, mean age 78 years) after cutting the proximal and distal TFCC insertions, and after open surgical TFCC reinsertion (n = 5) or TFCC reconstruction using a palmaris longus tendon graft ad modum Adams (n = 5). The cadaver arms were mounted in a custom-made fixture for a standardized Piano-key test. Radiostereometric images were recorded and AutoRSA software was used for image analyses. Standardised anatomical axes and coordinate systems of the forearm computer tomography bone models were applied to estimate DRUJ translation after TFCC lesions and after surgical repair. RESULTS: The DRUJ translation after cutting the proximal and distal TFCC insertions was 2.48 mm (95% CI 1.61; 3.36). Foveal TFCC reinsertion reduced DRUJ translation by 1.78 mm (95% CI 0.82; 2.74, p = 0.007), while TFCC reconstruction reduced DRUJ translation by 1.01 mm (95% CI -1.58; 3.60, p = 0.17). CONCLUSION: In conclusion, foveal TFCC reinsertion significantly decreased DRUJ translation while the stabilizing effect of Adams TFCC reconstruction was heterogeneous. This supports the clinical recommendation of TFCC reinsertion in patients suffering from symptomatic DRUJ instability due to acute fovea TFCC lesions.

Two-year results of the Moovis trapeziometacarpal joint arthroplasty with focus on early complications.

In this prospective study, we aimed to analyse the early results of 200 consecutive total trapeziometacarpal joint arthroplasties using the Moovis cup, a new generation, dual-mobility, uncemented conical cup, with special focus on early complications. At the 24-month follow-up, we found clinically relevant improvement of function and comfort. Among intraoperative complications were nine intraoperative trapezial fractures, which were treated by screw osteosynthesis; prolonged immobilization; and conversion to cemented cup fixation or primary or secondary trapeziectomy. One was left untreated as the loose cup did not cause notable symptoms. There were three implants with polyethylene wear and two with liner dislocation. We conclude that early outcomes of this new-generation implant are favourable, but its surgery is challenging and associated with important intraoperative and early postoperative complications related to the learning curve. Attentive reaming of the trapezium and careful cup impaction are crucial steps to avoid trapezial fracture and early cup failure. Level of evidence: II.

Distal radioulnar joint stability measured with radiostereometry during the piano key test.

Distal radioulnar joint instability is difficult to grade by clinical examination and interobserver reliability is low. This study used a new and precise radiostereometry method for measurement of distal radioulnar joint translation. Eight human donor arms were positioned in a custom-made fixture and a standardized piano key test was done with pressure on the ulnar head. Examination was done before and after dividing the styloid and foveal insertions of the triangular fibrocartilage complex. In the intact wrists, the piano key test induced a mean 1.36 mm translation of the ulnar head, which increased statistically significantly to 1.96 mm after a lesion of the styloid ligament insertion and to 2.3 mm after combined lesions of the styloid and foveal ligament insertions. This experimental cadaver study demonstrates a radiological method for precise quantification of distal radioulnar joint stability after different grades of triangular fibrocartilage complex injury.