Durable, acid-resistant copolymers from industrial by-product sulfur and microbially-produced tyrosine.

The search for alternative feedstocks to replace petrochemical polymers has centered on plant-derived monomer feedstocks. Alternatives to agricultural feedstock production should also be pursued, especially considering the ecological damage caused by modern agricultural practices. Herein, l-tyrosine produced on an industrial scale by E. coli was derivatized with olefins to give tetraallyltyrosine. Tetraallyltyrosine was subsequently copolymerized via its inverse vulcanization with industrial by-product elemental sulfur in two different comonomer ratios to afford highly-crosslinked network copolymers TTS x (x = wt% sulfur in monomer feed). TTS x copolymers were characterized by infrared spectroscopy, elemental analysis, thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis (DMA). DMA was employed to assess the viscoelastic properties of TTS x through the temperature dependence of the storage modulus, loss modulus and energy damping ability. Stress-strain analysis revealed that the flexural strength of TTS x copolymers (>6.8 MPa) is more than 3 MPa higher than flexural strengths for previously-tested inverse vulcanized biopolymer derivatives, and more than twice the flexural strength of some Portland cement compositions (which range from 3-5 MPa). Despite the high tyrosine content (50-70 wt%) in TTS x , the materials show no water-induced swelling or water uptake after being submerged for 24 h. More impressively, TTS x copolymers are highly resistant to oxidizing acid, with no deterioration of mechanical properties even after soaking in 0.5 M sulfuric acid for 24 h. The demonstration that these durable, chemically-resistant TTS x copolymers can be prepared from industrial by-product and microbially-produced monomers via a 100% atom-economical inverse vulcanization process portends their potential utility as sustainable surrogates for less ecofriendly materials.

Thermally-healable network solids of sulfur-crosslinked poly(4-allyloxystyrene).

Network polymers of sulfur and poly(4-allyloxystyrene), PAOS x (x = percent by mass sulfur, where x is varied from 10-99), were prepared by reaction between poly(4-allyloxystyrene) with thermal homolytic ring-opened S8 in a thiol-ene-type reaction. The extent to which sulfur content and crosslinking influence thermal/mechanical properties was assessed. Network materials having sulfur content below 50% were found to be thermosets, whereas those having >90% sulfur content are thermally healable and remeltable. DSC analysis revealed that low sulfur-content materials exhibited neither a T g nor a T m from -50 to 140 °C, whereas higher sulfur content materials featured T g or T m values that scale with the amount of sulfur. DSC data also revealed that sulfur-rich domains of PAOS90 are comprised of sulfur-crosslinked organic polymers and amorphous sulfur, whereas, sulfur-rich domains in PAOS99 are comprised largely of α-sulfur (orthorhombic sulfur). These conclusions are further corroborated by CS2-extraction and analysis of extractable/non-extractable fractions. Calculations based on TGA, FT-IR, H2S trapping experiments, CS2-extractable mass, and elemental combustion microanalysis data were used to assess the relative percentages of free and crosslinked sulfur and average number of S atoms per crosslink. Dynamic mechanical analyses indicate high storage moduli for PAOS90 and PAOS99 (on the order of 3 and 6 GPa at -37 °C, respectively), with a mechanical T g between -17 °C and 5 °C. A PAOS99 sample retains its full initial mechanical strength after at least 12 pulverization-thermal healing cycles, making it a candidate for facile repair and recyclability.

Interpenetrating Metal-Metalloporphyrin Framework for Selective CO2 Uptake and Chemical Transformation of CO2.

Herein we report a robust primitive cubic (pcu)-topology metal-metalloporphyrin framework (MMPF), MMPF-18, which was constructed from a ubiquitous secondary building unit of a tetranuclear zinc cluster, Zn4(µ4-O)(-COO)6, and a linear organic linker of 5,15-bis(4-carboxyphenyl)porphyrin (H2bcpp). The strong π-π stacking from porphyrins and the lengthy H2bcpp ligand affords a 4-fold-interpenetrating network along with reduced void spaces and confined narrow channels. Thereby, MMPF-18 presents segmented pores and high-density metalloporphyrin centers for selective CO2 uptake over CH4 and size-selective chemical transformation of CO2 with epoxides forming cyclic carbonates under ambient conditions.