Detection of nitrification inhibitor dicyandiamide: A direct electrochemical approach.

A single run approach for rapid detection of nitrification inhibitor, dicyandiamide (DCD) using electrogenerated chlorine assisted polymerization through azo bond, under acidic conditions and at a preanodized screen printed carbon electrode (SPCE*) is presented. The role of chloride containing support electrolyte in acidic medium along with oxygen functionalities/edge sites are found to be crucial for the successful oxidative polymerization and subsequent adsorption of oxidized products on the electrode surface. The SEM, cyclic voltammetry and X-ray photoelectron spectroscopy studies were used to characterize the polymer film formation. The system exhibited a linear range between 20 and 170 µM with a detection limit of 3 µM (S/N = 3). The method was successfully tested for the detection of DCD in dairy and water samples. Simultaneous detection of DCD in the presence of melamine has also been demonstrated.

Simple and Cost-effective Enzymatic Detection of Cholesterol Using Flow Injection Analysis.

A flow-injection analytical (FIA) system was developed for the determination of cholesterol concentrations based on enzymatic reactions that occurred in a cholesterol oxidase (CHOx)-immobilized, fused-silica capillary followed by electrochemical detection. The production of hydrogen peroxide from cholesterol in an enzymatic reaction catalyzed by CHOx was subsequently oxidized electrochemically at an electrode. Our FlA system demonstrated its cost-effectiveness and utility at an applied potential of 0.6 V (vs. Ag/AgCl), a flow rate of 100 µL/min and, under optimal conditions, the resulting signal demonstrated a linear dynamic range from 50 µM to 1.0 mM with a limit of detection (LOD) of 12.4 µM, limit of quantification (LOQ) of 44.9 µM, and the coefficient of variation of 5.17%. In addition, validation of our proposed system using a reference HDL-cholesterol kit used for clinical diagnosis suggested our FIA system was comparable to commercial kits for the determination of the cholesterol incorporation amount in various aqueous liposomal suspensions. These good analytical features achieved by FIA could make the implementation of this methodology possible for on-line monitoring of cholesterol in various types of samples.

Carbonization and Preparation of Nitrogen-Doped Porous Carbon Materials from Zn-MOF and Its Applications.

Nitrogen-doped porous carbon (NPC) materials were successfully synthesized via a Zn-containing metal-organic framework (Zn-MOF). The resulting NPC materials are characterized using various physicochemical techniques which indicated that the NPC materials obtained at different carbonization temperatures exhibited different properties. Pristine MOF morphology and pore size are retained after carbonization at particular temperatures (600 °C-NPC600 and 800 °C-NPC800). NPC800 material shows an excellent surface area 1192 m2/g, total pore volume 0.92 cm3/g and displays a higher CO2 uptake 4.71 mmol/g at 273 k and 1 bar. Furthermore, NPC600 material displays good electrochemical sensing towards H2O2. Under optimized conditions, our sensor exhibited a wide linearity range between 100 µM and 10 mM with a detection limit of 27.5 µM.

Simple aminophenol-based electrochemical probes for non-enzymatic, dual amperometric detection of NADH and hydrogen peroxide.

Non enzymatic detection of NADH and H2O2 is of practical significance for both environmental and biological prospective. However, there is no simple, straight forward electrochemical sensor available for sensing of them in real samples. Addressing this challenge, we report a simple stimuli responsive aminophenol, pre-anodized screen printed carbon electrode (SPCE*/AP) based electrochemical probes for dual detection of NADH and H2O2. Aminophenol prepared and adsorbed on the electrode from aminophenylboronic acid via boronic acid deprotection with H2O2. The SPCE*/AP fabricated with this process was characterized by cyclic voltammetry (CV), scanning electron microscope (SEM), Raman spectroscopy, UV-visible spectroscopy, and X-ray photoelectron spectroscopy (XPS). Amperometric detection results showed that SPCE*/AP electrodes exhibited linearity from 50 µM to 500 µM and from 200 µM to 2 mM with a detection limit (S/N = 3) of 4.2 µM and 28.9 µM for NADH and H2O2, respectively. Excellent reproducibility and selectivity for NADH and H2O2 were observed for this electrochemical platform. In addition, the matrix effect was investigated further using the same technique to analyze NADH and H2O2 in human urine samples, human serum samples, cell culture medium (containing 10% fetal bovine serum, FBS), and environmental water samples (tap water and rain water). Also, the present sensor demonstrated promising outcomes with living cells (normal cells and cancer cells).