Randomized controlled pilot study comparing small buccal defects around dental implants treated with a subepithelial connective tissue graft or with guided bone regeneration.

AIM: To compare subepithelial connective tissue grafts (SCTG) versus guided bone regeneration (GBR) for the treatment of small peri-implant dehiscence defects in terms of profilometric (primary outcome), clinical, and patient-reported outcome measures (PROMs). METHODS: Sixteen patients who presented with small buccal bone dehiscences (≤3 mm) following single implant placement were recruited. Following implant placement, buccal bone defect sites were randomly treated either with a SCTG or GBR. Six patients who lacked bone dehiscences after implant placement were assigned to a negative control. Transmucosal healing was applied in all patients. Patients were examined prior (T1) and after (T2) implant placement, at suture removal (T3), at implant impression (T5), at crown delivery (T6), and 12 (T7) months after crown delivery. Measurements included profilometric outcomes, marginal bone levels, buccal bone and soft tissue thickness, PROMs, and clinical parameters. All data were analyzed descriptively. RESULTS: The median changes in buccal contour as assessed by profilometric measures between T1 and T5 showed a decrease of 1.84 mm for the SCTG group and 1.06 mm for the GBR group. Between T2 and T7, the median change in the buccal contour amounted to 0.45 mm for SCTG and -0.94 mm (=loss) for GBR. Patients' pain perception tended to be higher in SCTG than in GBR. All peri-implant soft tissue parameters showed healthy oral tissues and no clinically relevant differences between groups. CONCLUSION: Within the limitations of this pilot study, treating small peri-implant dehiscence defects with a SCTG might be a viable alternative to GBR. The use of a SCTG tended to result in more stable profilometric outcomes and comparable clinical outcomes to GBR. However, patient-reported outcome measures tended to favor GBR.

In vitro evaluation of different protective techniques to reduce titanium particle contamination during implantoplasty.

OBJECTIVES: Our aim is to study titanium remains in a bone model during standardized implantoplasty under different isolation and protective modalities. MATERIAL AND METHODS: Forty implants were placed in artificial spongy bone blocks mimicking a horizontal bone loss and implant neck protrusion of 5 mm. Samples were randomly divided into four groups (n = 10), which were treated as follows: rubber dam (A), a dental adhesive paste (B), bone wax (C), and an unprotected positive control (D). Implantoplasty was performed using carbide and diamond burs under strict water cooling and standardized suction. After removal of the respective isolation materials, the bone blocks were thoroughly rinsed with tap water for 3 min and titanium chips were collected using a filter integrated in the model. The filter paper was removed and dissolved in 37% hydrochloric acid for 2 h at 120 °C and the titanium remnants were quantified using atomic absorption spectrometry. RESULTS: None of the test groups were able to completely prevent titanium particle contamination. Rubber dam (691 ± 249 µg) and bone wax (516 ± 157 µg) were found to be significantly more protective than the positive control (2313 ± 747 µg) (p < 0.001) with respect to the amount of titanium particles that remained in the bone model after implantoplasty. The adhesive paste group (1863.5 ± 538 µg) was not significantly different from the positive control (p = 0.19). CONCLUSIONS: Despite some limitations of the present study, titanium particles resulting from a standardized implantoplasty can be assumed to be significantly reduced when the tissues/bone were protected with rubber dam and bone wax, or a combination, depending on individual accessibility. CLINICAL RELEVANCE: Tissue protective measures to reduce or avoid particle contamination during implantoplasty is possible and should be considered and further clinically assessed to avoid iatrogenic inflammatory reactions.

Time efficiency and efficacy of a centralized computer-aided-design/computer-aided-manufacturing workflow for implant crown fabrication: A prospective controlled clinical study.

OBJECTIVE: To assess time efficiency and the efficacy of the prosthetic manufacturing for implant crown fabrication in a centralized workflow applying computer aided design and computer aided manufacturing (CAD-CAM). MATERIAL AND METHODS: Fifty-nine patients with one posterior implant each, were randomly allocated to either a centralized digital workflow (c-DW, test) or a laboratory digital workflow (l-DW, control). Patients were excluded from efficiency and efficacy analyses, if any additional restoration than this single implant crown had to be fabricated. A customized titanium abutment and a monolithic zirconia crown were fabricated in the c-DW. In the l-DW, models were digitalized for CAD-CAM fabrication of a monolithic zirconia crown using a standardized titanium base abutment. Time for impression, laboratory operating and delivery time were recorded. The efficacy of the prosthetic manufacturing was evaluated at try-in and at delivery. Data was analyzed descriptively. Statistical analyses using student's unpaired t- and paired Wilcoxon were performed (p < 0.05). RESULTS: At impression taking, 12 patients (c-DW) and 19 patients (l-DW) were included. The impression time was 9.4±3.5 min (c-DW) and 15.1 ± 4.6 min (l-DW) (p < 0.05). The laboratory operating time was 130 ± 31 min (c-DW) and 218.0±8 min (l-DW) (p < 0.05). The delivery time was significantly longer in the c-DW (5.9 ± 3.5 1 days) as compared to the l-DW (0.5±0.05 days). At try-in and at delivery, efficacy of prosthetic manufacturing was similar high in both workflows. CLINICAL RELEVANCE: The c-DW was more time efficient compared to the lab-DW and rendered a similar efficacy of prosthetic manufacturing.

Morning glory disc anomaly with an ipsilateral enlargement of the optic nerve pathway.

PURPOSE: To report three patients with an unilateral morning glory disc anomaly in association with an ipsilateral mild thickening of the optic nerve. METHODS: Three children with a morning glory disc anomaly underwent a magnetic resonance imaging (MRI) of the brain. Ophthalmological, genetic and MRI findings at follow-up are reported. A literature search on the association of morning glory anomaly in association with optic nerve glioma is reported.1 RESULTS: Three children with an unilateral morning glory anomaly and ipsilateral poor visual acuity were found to have an ipsilateral mild optic nerve enlargement on brain MRI. At serial MRI scanning, there was no progression of this finding. CONCLUSIONS: The morning glory disc anomaly is a rare congenital malformation of the optic disc. It can be associated with central nervous system abnormalities. The association with an optic nerve glioma has been described once before.1 Our three cases confirm the possible association between a morning glory disc anomaly and an ipsilateral optic nerve enlargement. Serial MRI showed no growth at follow-up. The awareness of this association by the ophthalmologists is important.

The influence of the emergence profile on the amount of undetected cement excess after delivery of cement-retained implant reconstructions.

OBJECTIVE: To test whether or not one of two emergence profile designs (concave or convex) is superior to the other in terms of remaining cement following cementation of reconstructions on individualized abutments and careful cement removal. MATERIALS AND METHODS: A central incisor with a single implant-supported reconstruction was selected as a model. Six types of abutments (n = 10) with two different emergence profile designs (concave (CC) and convex (CV)) and three crown-abutment margin depths (epimucosal, 1.5 mm submucosal, 3 mm submucosal) were fabricated through a CAD/CAM procedure. Lithium disilicate reinforced ceramic crowns were cemented with chemically polymerized resin cement. A blinded investigator attempted to remove all cement excess. Thereafter, the entire reconstruction was unscrewed and analyzed for the overall amount and the depth of cement excess. Kruskal-Wallis and Mann-Whitney tests were used to investigate differences between groups. When more than two groups were compared between each other, a Bonferroni correction of the P value was performed. RESULTS: Concave abutments presented significantly more cement remnants than CV abutments when the entire abutment area of the epimucosal margin groups was evaluated (CC0 mm: mean 2.31 mm2 (SD 0.99) vs. CV0 mm: mean 1.57 mm2 (SD 0.55); P = 0.043). A statistically significant increase in remnants was detected when the crown-abutment margin was located more submucosally for every abutment studied (0 mm vs. 1.5 mm: P < 0.000, 0 mm vs 3 mm: P < 0.000, 1.5 mm vs. 3 mm: P < 0.000). The buccal quadrant demonstrated the least, whereas the oral and interdental quadrants showed the greatest amount of cement excess. CONCLUSIONS: Concave emergence profile abutments and deep crown-abutment margin positions increased the risk of cement excess. Oral and interdental areas are more prone to cement remnants than other surface areas.

EAO Supplement Working Group 4 - EAO CC 2015 Short implants versus sinus lifting with longer implants to restore the posterior maxilla: a systematic review.

OBJECTIVE: To compare short implants in the posterior maxilla to longer implants placed after or simultaneously with sinus floor elevation procedures. The focused question was as follows: Are short implants superior to longer implants in the augmented sinus in terms of survival and complication rates of implants and reconstructions, patient-reported outcome measures (PROMs) and costs? METHODS: A MEDLINE search (1990-2014) was performed for randomized controlled clinical studies comparing short implants (≤8 mm) to longer implants (>8 mm) in augmented sinus. The search was complimented by an additional hand search of the selected papers and reviews published between 2011 and 2014. Eligible studies were selected based on the inclusion criteria, and quality assessments were conducted. Descriptive statistics were applied for a number of outcome measures. Survival rates of dental implants were pooled simply in case of comparable studies. RESULTS: Eight randomized controlled clinical trials (RCTs) comparing short implants versus longer implants in the augmented sinus derived from an initial search count of 851 titles were selected and data extracted. In general, all studies were well conducted with a low risk of bias for the majority of the analyzed parameters. Based on the pooled analyses of longer follow-ups (5 studies, 16-18 months), the survival rate of longer implants amounted to 99.5% (95% CI: 97.6-99.98%) and for shorter implants to 99.0% (95% CI: 96.4-99.8%). For shorter follow-ups (3 studies, 8-9 months), the survival rates of longer implants are 100% (95% CI: 97.1-100%) and for shorter implants 98.2% (95% CI: 93.9-99.7%). Complications were predominantly of biological origin, mainly occurred intraoperatively as membrane perforations, and were almost three times as higher for longer implant in the augmented sinus compared to shorter implants. PROMs, morbidity, surgical time and costs were generally in favor of shorter dental implants. All studies were performed by surgeons in specialized clinical settings. CONCLUSIONS: The outcomes of the survey analyses demonstrated predictably high implant survival rates for short implants and longer implants placed in augmented sinus and their respective reconstructions. Given the higher number of biological complications, increased morbidity, costs and surgical time of longer dental implants in the augmented sinus, shorter dental implants may represent the preferred treatment alternative.

Bone augmentation using a synthetic hydroxyapatite/silica oxide-based and a xenogenic hydroxyapatite-based bone substitute materials with and without recombinant human bone morphogenetic protein-2.

AIM: To test whether or not bone regeneration using deproteinized bovine bone mineral (DBBM) is comparable to hydroxyapatite/silica oxide (HA/SiO) and to test the effect of recombinant human bone morphogenetic protein-2 (rhBMP-2) as an adjunct to DBBM for localized bone regeneration. MATERIALS AND METHODS: In each of the 10 rabbits, 4 titanium cylinders were placed on the external cortical plates of their calvaria. Four treatment modalities were randomly allocated: (i) empty, (ii) HA/SiO, (iii) DBBM, and (iv) DBBM plus rhBMP-2 (DBBM/BMP). The animals were sacrificed at week 8. Descriptive histology and histomorphometric assessment using a superimposed test grid of points and cycloids were performed. RESULTS: The mean number of points of the test grid coinciding with bone within the cylinder reached 124 ± 35 bone points for empty controls, 92 ± 40 bone points for DBBM, 98 ± 44 bone points for synthetic HA/SiO, and 146 ± 34 bone points DBBM/BMP. The P-value for DBBM with and without BMP reached a borderline statistical significance of 0.051. However, the area of bone regeneration within the cylinders peaked for DBBM/BMP and was statistically significantly higher compared with empty cylinders (P < 0.05). The bone-to-bone substitute contact ranged between 32.9% ± 21.7 for DBBM, 39.6 ± 18.4% for HA/SiO, and 57.8% ± 10.2 for DBBM/BMP. The differences between DBBM/BMP and controls (DBBM, HA/SiO) were statistically significant (P < 0.05). CONCLUSIONS: DBBM and HA/SiO rendered comparable amounts of bone regeneration. The addition of rhBMP-2 to DBBM resulted in more favorable outcomes with respect to the area of bone regeneration and to bone-to-implant contact, thereby indicating the potential of this growth factor to enhance bone regeneration within this animal model.

Lidar quantification of bank erosion in Blue Earth County, Minnesota.

Sediment and phosphorus (P) transport from the Minnesota River Basin to Lake Pepin on the upper Mississippi River has garnered much attention in recent years. However, there is lack of data on the extent of sediment and P contributions from riverbanks vis-à-vis uplands and ravines. Using two light detection and ranging (lidar) data sets taken in 2005 and 2009, a study was undertaken to quantify sediment and associated P losses from riverbanks in Blue Earth County, Minnesota. Volume change in river valleys as a result of bank erosion amounted to 1.71 million m over 4 yr. Volume change closely followed the trend: the Blue Earth River > the Minnesota River at the county's northern edge > the Le Sueur River > the Maple River > the Watonwan River > the Big Cobb River > Perch Creek > Little Cobb River. Using fine sediment content (silt + clay) and bulk density of 37 bank samples representing three parent materials, we estimate bank erosion contributions of 48 to 79% of the measured total suspended solids at the mouth of the Blue Earth and the Le Sueur rivers. Corresponding soluble P and total P contributions ranged from 0.13 to 0.20% and 40 to 49%, respectively. Although tall banks (>3 m high) accounted for 33% of the total length and 63% of the total area, they accounted for 75% of the volume change in river valleys. We conclude that multitemporal lidar data sets are useful in estimating bank erosion and associated P contributions over large scales, and for riverbanks that are not readily accessible for conventional surveying equipment.

Detection of ethyl glucuronide in blood spotted on different surfaces.

This study aims to show that sensitive detection of ethyl glucuronide in dried blood spotted onto various surfaces after a period of 24h is feasible. At present, there is insufficient information how tightly ethyl glucuronide (EtG) binds to various materials and how easily it can be eluted. 4ml aliquots of blood samples obtained from seven volunteers after consumption of alcoholic beverages were applied to six different surfaces. After drying and a 24h-storage at 20±2°C the samples were re-dissolved in water, and EtG was subsequently analyzed by a LC-MS Paul-type ion trap. A comparison was made between dried and corresponding fluid samples. EtG was detectable in all subjects' samples following consumption of alcohol. EtG was also detectable after a storage time of four weeks at 4°C in whole blood that had been preserved with EDTA. EtG was detectable in all samples dried on different surfaces and its concentration remained relatively constant irrespective of the particular condition of the material. Detection of EtG in blood spots from the scene may indicate recent alcohol consumption in cases where collection of blood remained undone or could not be performed.

Biodegradation, soft and hard tissue integration of various polyethylene glycol hydrogels: a histomorphometric study in rabbits.

OBJECTIVES: (i) To evaluate biodegradation, hard and soft tissue integration using various polyethylene glycol (PEG) hydrogels; (ii) to evaluate the influence of arginine-glycine-aspartic acid (RGD) on two types of PEG hydrogels. MATERIAL AND METHODS: In seven rabbits, six treatment modalities were randomly applied subperiosteally on the skull: (1) a dense network PEG hydrogel (PEG1), (2) PEG1 modified with RGD (PEG1-RGD), (3) a looser network PEG hydrogel (PEG2), (4) PEG2 modified with RGD (PEG2-RGD), (5) a collagen membrane, and (6) a polylactide/polyglycolide/trimethylene carbonate membrane. The animals were sacrificed at 14 days. Histomorphometric analyses were performed on undecalcified Epon sections using a standardized region of interest. For statistical analysis, paired t-test and signed rank test were applied. RESULTS: PEG1 and PEG1-RGD remained intact and maintained the shape. PEG2 and PEG2-RGD completely degraded and were replaced by connective tissue and bone. The largest amount of mineralized tissue was found for PEG2-RGD (21.4%), followed by PEG 2 (9.5%). The highest percentage of residual hydrogel/membrane was observed for PEG1-RGD (55.6%), followed by PEG1 (26.7%). CONCLUSIONS: Modifications of the physico-chemical properties of PEG hydrogels and the addition of RGD influenced soft and hard tissue integration and biodegradation. PEG1 showed an increased degradation time and maintained the shape. The soft tissue integration was enhanced by adding an RGD sequence. A high turn-over rate and extensive bone regeneration was observed using PEG2. The addition of RGD further improved bone formation and soft tissue integration.

Echinococcus multilocularis--a zoonosis of anthropogenic environments?

Transmission of the fox tapeworm Echinococcus multilocularis, the causative agent of human alveolar echinococcosis, is known to depend on various environmental factors which are subject to human influence. Epidemiological data suggest that in most endemic regions anthropogenic landscape changes (e.g. deforestation and agricultural practices) have led to more favourable conditions for the parasite's animal hosts, especially arvicolid rodents, thereby increasing the risk for parasite transmission and human disease. Examples are the conversion of forests or crop fields into meadows and pastures in Europe, China and North America, and overgrazing of natural grassland in central Asia. Other anthropogenic factors include interference with host population densities by wildlife disease control, changing hunting pressure and provision of new habitats, e.g. in urban areas. Domestic dogs may, under certain conditions, get involved in the otherwise largely wildlife-based transmission, and thereby greatly increase the infection pressure to humans. The introduction of neozootic host species may increase transmission, or even initiate the parasite's life-cycle in previously non-endemic regions. Lastly, the parasite itself may be accidentally introduced into non-endemic areas, if suitable host populations are present (e.g. in northern Japan).

Pinning frequencies of the collective modes in alpha-uranium.

Uranium is the only known element that features a charge-density wave (CDW) and superconductivity. We report a comparison of the specific heat of single-crystal and polycrystalline alpha-uranium. In the single crystal we find excess contributions to the heat capacity at 41 K, 38 K, and 23 K, with a Debye temperature ThetaD = 265 K. In the polycrystalline sample the heat capacity curve is thermally broadened (ThetaD = 184 K), but no excess heat capacity was observed. The excess heat capacity Cphi (taken as the difference between the single-crystal and polycrystal heat capacities) is well described in terms of collective-mode excitations above their respective pinning frequencies. This attribution is represented by a modified Debye spectrum with two cutoff frequencies, a pinning frequency V0 for the pinned CDW (due to grain boundaries in the polycrystal), and a normal Debye acoustic frequency occurring in the single crystal.

Large harmonic softening of the phonon density of states of uranium.

Phonon density-of-states curves were obtained from inelastic neutron scattering spectra from the three crystalline phases of uranium at temperatures from 50 to 1213 K. The alpha-phase showed an unusually large thermal softening of phonon frequencies. Analysis of the vibrational power spectrum showed that this phonon softening originates with the softening of a harmonic solid, as opposed to vibrations in anharmonic potentials. It follows that thermal excitations of electronic states are more significant thermodynamically than are the classical volume effects. For the alpha-beta and beta-gamma phase transitions, vibrational and electronic entropies were comparable.