Influence of dissolved gases on sonochemistry and sonoluminescence in a flow reactor.

In the present work, the influence of gas addition is investigated on both sonoluminescence (SL) and radical formation at 47 and 248 kHz. The frequencies chosen in this study generate two distinct bubble types, allowing to generalize the conclusions for other ultrasonic reactors. In this case, 47 kHz provides transient bubbles, while stable ones dominate at 248 kHz. For both bubble types, the hydroxyl radical and SL yield under gas addition followed the sequence: Ar>Air>N2>>CO2. A comprehensive interpretation is given for these results, based on a combination of thermal gas properties, chemical reactions occurring within the cavitation bubble, and the amount of bubbles. Furthermore, in the cases where argon, air and nitrogen were bubbled, a reasonable correlation existed between the OH-radical yield and the SL signal, being most pronounced under stable cavitation at 248 kHz. Presuming that SL and OH originate from different bubble populations, the results indicate that both populations respond similarly to a change in acoustic power and dissolved gas. Consequently, in the presence of non-volatile pollutants that do not quench SL, sonoluminescence can be used as an online tool to qualitatively monitor radical formation.

Characterization of stable and transient cavitation bubbles in a milliflow reactor using a multibubble sonoluminescence quenching technique.

The bubble type, generated by an ultrasonic field, was studied in a batch and flow reactor using a multibubble sonoluminescence (MBSL) quenching technique with propanol and acetone. The influence of frequency and transducer configuration was evaluated using the same piezoelectric element in both setups. Results show that the bubble type not only depends on the frequency, but also on the input power or transducer configuration. Additionally, the effect of flow on sonoluminescence yield and bubble type was studied in the continuous setup at various frequencies. As the flow becomes turbulent, the sonoluminescence signal reaches a plateau for three out of four frequencies, and a transition from transient to stable cavitation occurs for frequencies below 200 kHz.

Lung exposure to nanoparticles modulates an asthmatic response in a mouse model.

The aim of this study was to investigate the modulation of an asthmatic response by titanium dioxide (TiO2) or gold (Au) nanoparticles (NPs) in a murine model of diisocyanate-induced asthma. On days 1 and 8, BALB/c mice received 0.3% toluene diisocyanate (TDI) or the vehicle acetone-olive oil (AOO) on the dorsum of both ears (20 µL). On day 14, the mice were oropharyngeally dosed with 40 µL of a NP suspension (0.4 mg·mL⁻¹ (∼0.8 mg·kg⁻¹) TiO2 or Au). 1 day later (day 15), the mice received an oropharyngeal challenge with 0.01% TDI (20 µL). On day 16, airway hyperreactivity (AHR), bronchoalveolar lavage (BAL) cell and cytokine analysis, lung histology, and total serum immunoglobulin E were assessed. NP exposure in sensitised mice led to a two- (TiO2) or three-fold (Au) increase in AHR, and a three- (TiO2) or five-fold (Au) increase in BAL total cell counts, mainly comprising neutrophils and macrophages. The NPs taken up by BAL macrophages were identified by energy dispersive X-ray spectroscopy. Histological analysis revealed increased oedema, epithelial damage and inflammation. In conclusion, these results show that a low, intrapulmonary doses of TiO2 or Au NPs can aggravate pulmonary inflammation and AHR in a mouse model of diisocyanate-induced asthma.