Methods optimization for the expression and purification of human calcium calmodulin-dependent protein kinase II alpha.

Calcium/calmodulin-dependent protein kinase II (CaMKII) is a complex multifunctional kinase that is highly expressed in central nervous tissues and plays a key regulatory role in the calcium signaling pathway. Despite over 30 years of recombinant expression and characterization studies, CaMKII continues to be investigated for its impact on signaling cooperativity and its ability to bind multiple substrates through its multimeric hub domain. Here we compare and optimize protocols for the generation of full-length wild-type human calcium/calmodulin-dependent protein kinase II alpha (CaMKIIα). Side-by-side comparison of expression and purification in both insect and bacterial systems shows that the insect expression method provides superior yields of the desired autoinhibited CaMKIIα holoenzymes. Utilizing baculovirus insect expression system tools, our results demonstrate a high yield method to produce homogenous, monodisperse CaMKII in its autoinhibited state suitable for biophysical analysis. Advantages and disadvantages of these two expression systems (baculovirus insect cell versus Escherichia coli expression) are discussed, as well as purification optimizations to maximize the enrichment of full-length CaMKII.

Unravelling the Mechanism of Elastin-like Polypeptide-Enzyme Fusion Stabilization in Organic Solvents.

Elastin-like polypeptides (ELP) are a class of materials that are widely used as purification tags and in potential therapeutic applications. We have used the hydrophobic nature of ELP to extract them into organic solvents and precipitate them to obtain highly pure materials. Although many different types of ELP have been rapidly purified in this manner, the underlying mechanism for this process and its ability to retain functional proteins within organic phase-rich media has been unclear. A cleavable ELP-Intein construct fused with the enzyme chorismate mutase (ELP-I-Cm2) was used to better understand the organic solvent extraction process for ELP and the factors impacting the retention of enzyme activity. Our extraction studies indicated that a cell lysis step was essential to stabilize the ELP-I-Cm2 in the organic phase, prevent intein cleavage, and extract the fusion protein with high efficiency and retained activity. Circular dichroism and infrared spectroscopic characterization of ELP-I-Cm2 in organic solvents and aqueous solutions of the extracted and precipitated material indicated that the ELP secondary structure was retained in both environments. Atomic force microscopy and negative stain transmission electron microscopy imaging of ELP-I-Cm2 in organic solvents revealed highly regular circular features that were ∼50 nm in diameter, in contrast to larger (>100 nm) irregular features found in aqueous solutions. Since reverse micelles have often been used in catalytic processes, we evaluated the enzymatic activity of the ELP-I-Cm2 reversed micelles in different organic solvent mixtures and found that Cm2-mediated reactions in organic media were of comparable rate and efficiency to those in aqueous media. Based on these findings, we report an exciting new opportunity for ELP-enzyme fusion applications by exploiting their ability to form catalytically active reverse micelles in organic media.

Structure-function relationships of cholesterol mobilization from the endo-lysosome compartment of NPC1-deficient human cells by ß-CD polyrotaxanes.

Niemann-Pick Type C is a rare metabolic disorder characterized by the cellular accumulation of cholesterol within endosomal and lysosomal compartments. 2-Hydroxypropyl-ß-cyclodextrin (HP-ß-CD) containing polyrotaxanes represent an attractive approach for treating this disease due to their ability to circulate in the blood stream for longer periods of time as a prodrug form of HP-ß-CD. Once inside the cell, the macromolecular structure is thought to break down into the Pluronic precursor and the active cyclodextrin agent that promotes cholesterol mobilization from the aberrant accumulations within NPC-deficient cells. We now report that both cholesterol and decaarginine (R10) endcapped polyrotaxanes are able to remove cholesterol from NPC1 patient fibroblasts. R10 endcapped materials enter these cells and are localized within endosomes after 16 h. The cholesterol mobilization from endo-lysosomal compartments of NPC1 cells by the polyrotaxanes was directly related to their extent of endcapping and their threading efficiency. Incorporation of 4-sulfobutylether-ß-cyclodextrin (SBE-ß-CD) significantly improved cholesterol mobilization due to the improved solubility of the compounds. Additionally, in our efforts to scale-up the synthesis for preclinical studies, we prepared a library of polyrotaxanes using a solid phase synthesis method. These compounds also led to significant cholesterol mobilization from the cells, however, cytotoxicity studies showed that they were substantially more toxic than those prepared by the solvent-assisted method, thus limiting the therapeutic utility of agents prepared by this expedited method. Our findings demonstrate that complete endcapping of the polyrotaxanes and improved solubility are important design features for delivering high copy numbers of therapeutic ß-CD to promote enhanced sterol clearance in human NPC1-deficient cells.

Synthesis of Phosphatidyl Glycerol Containing Unsymmetric Acyl Chains Using H-Phosphonate Methodology.

Naturally occurring phospholipids, such as phosphatidyl glycerol (PG), are gaining interest due to the roles they play in disease mechanisms. To elucidate the metabolism of PG, an optically pure material is required, but this is unfortunately not commercially available. Our previous PG synthesis route utilized phosphoramidite methodology that addressed issues surrounding fatty acid substrate scope and glycerol backbone modifications prior to headgroup phosphorylation, but faltered in the reproducibility of the overall pathway due to purification challenges. Herein, we present a robust pathway to optically pure PG in fewer steps, utilizing H-phosphonates that features a chromatographically friendly and stable triethyl ammonium H-phosphonate salt. Our route is also amendable to the simultaneous installation of different acyl chains, either saturated or unsaturated, on the glycerol backbone.

Proteins Adsorbing onto Surface-Modified Nanoparticles: Effect of Surface Curvature, pH, and the Interplay of Polymers and Proteins Acid-Base Equilibrium.

Protein adsorption onto nanomaterials is a process of vital significance and it is commonly controlled by functionalizing their surface with polymers. The efficiency of this strategy depends on the design parameters of the nanoconstruct. Although significant amount of work has been carried out on planar surfaces modified with different types of polymers, studies investigating the role of surface curvature are not as abundant. Here, we present a comprehensive and systematic study of the protein adsorption process, analyzing the effect of curvature and morphology, the grafting of polymer mixtures, the type of monomer (neutral, acidic, basic), the proteins in solution, and the conditions of the solution. The theoretical approach we employed is based on a molecular theory that allows to explicitly consider the acid-base reactions of the amino acids in the proteins and the monomers on the surface. The calculations showed that surface curvature modulates the molecular organization in space, but key variables are the bulk pH and salt concentration (in the millimolar range). When grafting the NP with acidic or basic polymers, the surface coating could disfavor or promote adsorption, depending on the solution's conditions. When NPs are in contact with protein mixtures in solution, a nontrivial competitive adsorption process is observed. The calculations reflect the balance between molecular organization and chemical state of polymers and proteins, and how it is modulated by the curvature of the underlying surface.

Continuous Flow Synthesis of A2E Guided by Design of Experiments and High-Throughput Studies.

N-Retinylidene-N-retinylethanolamine (A2E) is the most studied lipid bisretinoid. It forms lipofuscin deposits in the retinal pigment epithelium (RPE), causing vision impairment and blindness in eye conditions, such as Stargardt's disease, cone-rod dystrophy, Best's macular dystrophy, and potentially age-related macular degeneration. Synthetic A2E is often used for inducing the accumulation of lipofuscins within the lysosomes of RPE cells in culture as an in vitro surrogate of retinal lipofuscin buildup, providing insights into the mechanisms of these eye conditions. Many reports describing the use of synthetic A2E employ material that has been prepared using a one-pot reaction of all-trans-retinal (ATR) and ethanolamine at room temperature for 48 h. We have revisited this synthesis by performing a design of experiments (DoE) and high-throughput experimentation workflow that was tailored to identify the most productive combination of the variables (temperature, solvent, and reagent equivalences) for optimization of A2E yield. Our DoE findings revealed that the interaction of ethanolamine with acetic acid and ATR was pivotal for the formation of A2E in high yield, indicating that imine formation is the critical step in the reaction. Armed with these results, we were able to optimize the method using a microfluidic reactor system before upscaling those conditions for continuous flow synthesis of A2E. This revised method enabled a more efficient production of material, from a reaction time of 48 h to a residence time of 33 min, with an accompanying yield improvement from 49 to 78%. Furthermore, we implemented a simple method to evaluate the quality of the A2E produced using optical spectroscopy and LC-MS characteristics to assure that the biological properties observed with A2E samples are not confounded by the presence of oxidized impurities that are commonly present in conventional A2E samples.

Lipofuscin causes atypical necroptosis through lysosomal membrane permeabilization.

Lipofuscin granules enclose mixtures of cross-linked proteins and lipids in proportions that depend on the tissue analyzed. Retinal lipofuscin is unique in that it contains mostly lipids with very little proteins. However, retinal lipofuscin also presents biological and physicochemical characteristics indistinguishable from conventional granules, including indigestibility, tendency to cause lysosome swelling that results in rupture or defective functions, and ability to trigger NLRP3 inflammation, a symptom of low-level disruption of lysosomes. In addition, like conventional lipofuscins, it appears as an autofluorescent pigment, considered toxic waste, and a biomarker of aging. Ocular lipofuscin accumulates in the retinal pigment epithelium (RPE), whereby it interferes with the support of the neuroretina. RPE cell death is the primary cause of blindness in the most prevalent incurable genetic and age-related human disorders, Stargardt disease and age-related macular degeneration (AMD), respectively. Although retinal lipofuscin is directly linked to the cell death of the RPE in Stargardt, the extent to which it contributes to AMD is a matter of debate. Nonetheless, the number of AMD clinical trials that target lipofuscin formation speaks for the potential relevance for AMD as well. Here, we show that retinal lipofuscin triggers an atypical necroptotic cascade, amenable to pharmacological intervention. This pathway is distinct from canonic necroptosis and is instead dependent on the destabilization of lysosomes. We also provide evidence that necroptosis is activated in aged human retinas with AMD. Overall, this cytotoxicity mechanism may offer therapeutic targets and markers for genetic and age-related diseases associated with lipofuscin buildups.

Affinity Capture of p97 with Small-Molecule Ligand Bait Reveals a 3.6 Å Double-Hexamer Cryoelectron Microscopy Structure.

Recent progress in the development of affinity grids for cryoelectron microscopy (cryo-EM) typically employs genetic engineering of the protein sample such as histidine or Spy tagging, immobilized antibody capture, or nonselective immobilization via electrostatic interactions or Schiff base formation. We report a powerful and flexible method for the affinity capture of target proteins for cryo-EM analysis that utilizes small-molecule ligands as bait for concentrating human target proteins directly onto the grid surface for single-particle reconstruction. This approach is demonstrated for human p97, captured using two different small-molecule high-affinity ligands of this AAA+ ATPase. Four electron density maps are revealed, each representing a p97 conformational state captured from solution, including a double-hexamer structure resolved to 3.6 Å. These results demonstrate that the noncovalent capture of protein targets on EM grids modified with high-affinity ligands can enable the structure elucidation of multiple configurational states of the target and potentially inform structure-based drug design campaigns.

Development of a Fast Organic Extraction-Precipitation Method for Improved Purification of Elastin-Like Polypeptides That Is Independent of Sequence and Molecular Weight.

Elastin-like polypeptides (ELP), an increasingly popular tag for protein purification, commonly rely upon inverse transition cycling (ITC) to exploit their lower critical solution temperature characteristics for purification. While considerably faster than chromatography, ITC is still time consuming and often fails to remove host cell contaminants to an acceptable level for in vivo experiments. Here, we present a rapid purification workflow for ELP of broadly varying molecular weight and sequence using a polar organic solvent extraction and precipitation strategy. Four different ELP purification methods were directly compared for their ability to remove host cell protein, nucleic acids, and lipopolysaccharide (LPS) contaminants using a model ELP. On the basis of these findings, an optimized extraction-precipitation method was developed that gave highly pure ELP from bacterial pellets in approximately 2.5 h while removing major host cell contaminants, including LPS to levels below 1 EU/mL, to produce highly pure material that is suitable for in vivo applications. Application of this method to the rapid purification of an ELP-epidermal growth factor fusion gave an isolate that retained its capacity to bind to epidermal growth factor receptor positive cells, thereby demonstrating that this method is capable of producing a functional construct after purification by organic extraction-precipitation.

Immunostimulatory Response of RWFV Peptide-Targeted Lipid Nanoparticles on Bladder Tumor Associated Cells.

Bladder carcinoma is the most expensive tumor type to treat on a cost-per-patient basis from diagnosis to death. Treatment with Bacillus Calmette Guerin (BCG) instillation is the only approved immunotherapy in the clinic for the remission of superficial bladder carcinoma. Unfortunately, frequent relapses, high local morbidity, risk of systemic mycobacterial infection, and occasional supply chain interruptions limit the utility of BCG for bladder cancer treatment. It is well known that BCG utilizes an adhesin protein known as fibronectin attachment protein that possesses a crucial RWFV peptide sequence for binding to the bladder tumor microenvironment prior to the initiation of the immunotherapeutic response. We report a RWFV-targeted, pH-responsive stabilized lipid nucleic acid nanoparticle (LNP) vehicle for the effective delivery of an immunotherapeutic oligonucleotide, CpG, that is assembled using a glass microfluidic Chemtrix 3221 reactor. Our small-angle X-ray scattering studies revealed a layer-by-layer assembly of the oligonucleotides with a repeat distance of 6.04 nm within the LNP. Using flow cytometry to evaluate the different cell types found in the bladder tumor microenvironment, RWFV-targeted LNPs were found to attach specifically to fibronectin-secreting cells in culture during a 2 h incubation period. The trafficking and cellular fate of these targeted LNPs were revealed by confocal microscopy of RAW264.7 macrophages to enter the endocytotic pathway within 4 h post treatment. Importantly, control studies reveal that only the pH-sensitive LNP formulation is capable of efficiently releasing the payload within 12 h. As a result, the targeted pH-sensitive LNP resulted in higher expression levels of costimulatory molecules CD83, CD 86, and MHC II, while also inducing higher levels of TNF-α secretion from macrophages. These results demonstrate that RWFV-targeted, pH-sensitive LNP formulations are capable of maximum immunotherapeutic response, potentially making them a highly efficient, lower risk, and readily manufactured alternative to BCG immunotherapy.

Aldol Reactions of Biorenewable Triacetic Acid Lactone Precursor Evaluated Using Desorption Electrospray Ionization Mass Spectrometry High-Throughput Experimentation and Validated by Continuous Flow Synthesis.

Desorption electrospray ionization-mass spectrometry (DESI-MS) was used as a high-throughput experimentation (HTE) tool to rapidly identify derivatives of the biobased platform molecule triacetic acid lactone (TAL). TAL is a platform molecule capable of conversion to a wide range of useful commodity chemicals, agrochemicals, and advanced pharmaceutical intermediates. In the present study, a diverse family of aldol reaction mixtures were prepared in high-density microtiter plates with a liquid handling robot, then printed with a pin tool onto a PTFE surface for analysis by DESI-MS. Our DESI-MS results indicate that aldol products of TAL were obtained for each substrate tested, in good agreement with previously reported TAL reactivity. These HTE experiments also revealed solvent-dependent reactivity trends that facilitated reaction scale up. Our findings suggest that DESI-MS analysis can rapidly inform the selection of optimal reaction conditions from a wide variety of conditions for scale up using continuous synthesis conditions.

High-throughput screening of organic reactions in microdroplets using desorption electrospray ionization mass spectrometry (DESI-MS): hardware and software implementation.

This study describes an automated system used for high throughput screening of reaction conditions based on accelerated reactions occurring in small volumes of reagents. Reaction mixtures are prepared in array format using a fluid handling robot and spotted on a flat polytetrafluoroethylene plate at densities up to 6144 per plate. The reaction and analysis steps are performed simultaneously using desorption electrospray ionization (DESI) to release microdroplets containing the reaction mixture from the plate for reaction prior to arrival at a mass spectrometer. Analysis rates are up to 1 reaction mixture per second and data are recorded in real time using an ion trap mass spectrometer. Beacon compounds are used to triangulate position on the plate and this allows tandem mass spectrometry (MS/MS) to be performed on confirm products of interest. Custom software allows the user to control the system. It is also used to receive data from the DESI mass spectrometer to screen the spectra for compounds of interest, to perform MS/MS and to save data. This custom software also communicates with the software controlling the fluid handling robot (Biomek i7) as well as the Beckman software used to prepare reaction mixtures and also the software that controls the solvent used as the DESI spray. Data were recorded for N-alkylation, N-acylation and N-sulfonylation reactions in three 8 hour experiments on successive days to establish the ruggedness and repeatability of the system. Repeatability is high (94-97%) over this period with false negative 6% (depending on noise threshold chosen). Plates containing 384 reaction mixtures are analyzed in 7 min by moving the DESI sprayer in steps under the sprayer instead of continuously.

Stereospecific synthesis of phosphatidylglycerol using a cyanoethyl phosphoramidite precursor.

Phosphatidylglycerols (PG) are a family of naturally occurring phospholipids that are responsible for critical operations within cells. PG are characterized by an (R) configuration in the diacyl glycerol backbone and an (S) configuration in the phosphoglycerol head group. Herein, we report a synthetic route to provide control over the PG stereocenters as well as control of the acyl chain identity.

High-Throughput Experimentation and Continuous Flow Evaluation of Nucleophilic Aromatic Substitution Reactions.

Nucleophilic aromatic substitution (SNAr) reactions were optimized using high-throughput experimentation techniques for execution under flow conditions. A total of 3072 unique reactions were evaluated with an analysis time of ∼3.5 s per reaction using a system that combines a liquid handling robot for reaction mixture preparation with desorption electrospray ionization (DESI) mass spectrometry (MS) for analysis. The reactions were performed in bulk microtiter arrays with and without incubation. In-house developed software was used to process the data and generate heat maps of the results. This information was then used to select the most promising conditions for continuous synthesis under microfluidic reactor conditions. Our results show that this HTE approach provides robust guidance for narrowing the range of conditions needed for optimization of SNAr reactions.

Development And In Vitro Characterization Of Bladder Tumor Cell Targeted Lipid-Coated Polyplex For Dual Delivery Of Plasmids And Small Molecules.

BACKGROUND: Bladder cancer is the fourth most common cancer in men and eleventh most common in women. Combination therapy using a gene and chemotherapeutic drug is a potentially useful strategy for treating bladder cancer in cases where a synergistic benefit can be achieved successfully. This approach relies on developing drug combinations using carrier systems that can load both hydrophilic genes and hydrophobic drugs. Ideally, the formulation for carrier system should be free of traditional high shear techniques such as sonication and extrusion to reduce shear-induced nucleic acid strand breakage. Moreover, the system should be able to protect the nucleic acid from enzymatic attack and deliver it specifically to the tumor site. MATERIALS AND METHODS: A dual payload carrier system that was formulated using a simple flow mixing technique to complex anionic plasmid (EGFP-NLS) using a cationic polymer (CD-PEI2.5kD) followed by coating of the polyplex using lipid membranes. The resulting lipid-coated polyplex (LCP) formulations are targeted to bladder cancer cells by employing a bacterial adhesive peptide sequence, RWFV, that targets the LCP to the tumor stroma for efficiently delivering reporter plasmid, EGFP-NLS and a model small molecule drug, pyrene, to the cancer cells. RESULTS: Encapsulation efficiency of the peptide targeted carrier for the plasmid was 50% ± 0.4% and for pyrene it was 16% ± 0.4%. The ability of the targeted LCP to transfect murine bladder cancer cells was 4-fold higher than LCP bearing a scrambled peptide sequence. Fluorescence of cells due to pyrene delivery was highest after 4 hrs using targeted LCP. Finally, we loaded the peptide targeted LCP with anti-cancer agent, curcumin. The targeted formulation of curcumin resulted in only 45% viable cancer cells at a concentration of 5 µg/mL, whereas the empty and non-targeted formulations did not result any significant cell death. CONCLUSION: These results demonstrate the specificity of the targeting peptide sequence in engaging tumor cells and the utility of the developed carrier platform to deliver a dual payload to bladder tumor cells.

High Throughput Experimentation Using DESI-MS to Guide Continuous-Flow Synthesis.

We demonstrate the use of accelerated reactions with desorption electrospray ionization mass spectrometry (DESI-MS) as a tool for predicting the outcome of microfluidic reactions. DESI-MS was employed as a high throughput experimentation tool to provide qualitative predictions of reaction outcomes, so that vast regions of chemical reactivity space may be more rapidly explored and areas of optimal efficiency identified. This work is part of a larger effort to accelerate reaction optimization to enable the rapid development of continuous-flow syntheses of small molecules in high yield. In order to build confidence in this approach, however, it is necessary to establish a robust predictive connection between reactions performed under analogous DESI-MS, batch, and microfluidic reaction conditions. In the present work, we explore the potential of high throughput DESI-MS experiments to identify trends in reactivity based on chemical structure, solvent, temperature, and stoichiometry that are consistent across these platforms. N-alkylation reactions were used as the test case due to their ease of reactant and product detection by electrospray ionization mass spectrometry (ESI-MS) and their great importance in API synthesis. While DESI-MS narrowed the scope of possibilities for reaction selection among some parameters such as solvent, others like stoichiometry and temperature still required further optimization under continuous synthesis conditions. DESI-MS high throughput experimentation (HTE) reaction evaluation significantly reduced the search space for flow chemistry optimization, thus representing a significant savings in time and materials to achieve a desired transformation with high efficiency.

An Implantable Ultrasonically-Powered Micro-Light-Source (µLight) for Photodynamic Therapy.

Photodynamic therapy (PDT) is a promising cancer treatment modality that can selectively target unresectable tumors through optical activation of cytotoxic agents, thus reducing many side effects associated with systemic administration of chemotherapeutic drugs. However, limited light penetration into most biological tissues have so far prevented its widespread adoption beyond dermatology and a few other oncological applications in which a fiber optic can be threaded to the desired locations via an endoscopic approach (e.g., bladder). In this paper, we introduce an ultrasonically powered implantable microlight source, µLight, which enables in-situ localized light delivery to deep-seated solid tumors. Ultrasonic powering allows for small receiver form factor (mm-scale) and power transfer deep into the tissue (several centimeters). The implants consist of piezoelectric transducers measuring 2 × 2 × 2 mm3 and 2 × 4 × 2 mm3 with surface-mounted miniature red and blue LEDs. When energized with 185 mW/cm2 of transmitted acoustic power at 720 kHz, µLight can generate 0.048 to 6.5 mW/cm2 of optical power (depending on size of the piezoelectric element and light wavelength spectrum). This allows powering multiple receivers to a distance of 10 cm at therapeutic light output levels (a delivery of 20-40 J/cm2 light radiation dose in 1-2 hours). In vitro tests show that HeLa cells irradiated with µLights undergo a 70% decrease in average cell viability as compared to the control group. In vivo tests in mice implanted with 4T1-induced tumors (breast cancer) show light delivery capability at therapeutic dose levels. Overall, results indicate implanting multiple µLights and operating them for 1-2 hours can achieve cytotoxicity levels comparable to the clinically reported cases using external light sources.

Gd3+:DOTA-Modified 2-Hydroxypropyl-ß-Cyclodextrin/4-Sulfobutyl Ether-ß-Cyclodextrin-Based Polyrotaxanes as Long Circulating High Relaxivity MRI Contrast Agents.

A family of five water-soluble Gd3+:1,4,7,10-tetraazacyclododecane-1,4,7-tetraacetic acid-modified polyrotaxane (PR) magnetic resonance contrast agents bearing mixtures of 2-hydroxypropyl-ß-cyclodextrin and 4-sulfobutylether-ß-cyclodextrin macrocycles threaded onto Pluronic cores were developed as long circulating magnetic resonance contrast agents. Short diethylene glycol diamine spacers were utilized for linking the macrocyclic chelator to the PR scaffold prior to Gd3+ chelation. The PR products were characterized by 1H NMR, gel permeation chromatography/multiangle light scattering, dynamic light scattering, and analytical ultracentrifugation. Nuclear magnetic relaxation dispersion and molar relaxivity measurements at 23 °C revealed that all the PR contrast agents displayed high spin-spin T1 relaxation and spin-lattice T2 relaxation rates relative to a DOTAREM control. When injected at 0.05 mmol Gd/kg body weight in BALB/c mice, the PR contrast agents increased the T1-weighted MR image intensities with longer circulation times in the blood pool than DOTAREM. Excretion of the agents occurred predominantly via the renal or biliary routes depending on the polyrotaxane structure, with the longest circulating L81 Pluronic-based agent showing the highest liver uptake. Proteomic analysis of PR bearing different ß-cyclodextrin moieties indicated that lipoproteins were the predominant component associated with these materials after serum exposure, comprising as much as 40% of the total protein corona. We infer from these findings that Gd(III)-modified PR contrast agents are promising long-circulating candidates for blood pool analysis by MRI.

High Throughput Experimentation and Continuous Flow Validation of Suzuki-Miyaura Cross-Coupling Reactions.

Traditional methods to discover optimal reaction conditions for small molecule synthesis is a time-consuming effort that requires large quantities of material and a significant expenditure of labor. High-throughput techniques are a potentially transformative approach for reaction condition screening, however, rapid validation of the reaction hotspots under continuous flow conditions remains necessary to build confidence in high throughput screening hits. Continuous flow technology offers the opportunity to upscale the screening hotspots and optimize their output of the target compounds due to the exceptional heat and mass transfer ability of flow reactions that are conducted in a smaller and safer reaction volume. We report a robotic high throughput technique to execute reactions in multi-well plates that were coupled with fast mass spectrometric analysis using an autosampler to accelerate the reaction screening process. Palladium-catalyzed Suzuki-Miyaura cross-coupling reactions were screened in this system and a heat map was generated to identify the best reaction conditions for downstream scale-up under continuous flow. Here, high throughput experimentation reactions in 96-well plates were performed for 1 h at 50 °C, 100 °C, 150 °C, and 200 °C before diluting them into 384-well plates for mass analysis. With the aid of high throughput tools, 648 unique experiments were conducted in duplicate. The cross-coupling reactions were evaluated as a function of stoichiometry, temperature, concentration, order of addition, and substrate type. The hotspots from high throughput experimentation were examined using a microfluidic Chemtrix system that confirmed the positive reaction leads as true positives. Negative outcomes identified by these experiments were found to be true negatives by microfluidic reaction evaluation. Quantitation of product yields was performed using high-performance liquid chromatography-mass spectrometry (HPLC/MS-MS).

Cerivastatin Nanoliposome as a Potential Disease Modifying Approach for the Treatment of Pulmonary Arterial Hypertension.

In this study we investigated nanoliposome as an approach to tailoring the pharmacology of cerivastatin as a disease-modifying drug for pulmonary arterial hypertension (PAH). Cerivastatin encapsulated liposomes with an average diameter of 98 ± 27 nm were generated by a thin film and freeze-thaw process. The nanoliposomes demonstrated sustained drug-release kinetics in vitro and inhibited proliferation of pulmonary artery (PA) smooth muscle cells with significantly less cellular cytotoxicity as compared with free cerivastatin. When delivered by inhalation to a rat model of monocrotaline-induced PAH, cerivastatin significantly reduced PA pressure from 55.13 ± 9.82 to 35.56 ± 6.59 mm Hg (P < 0.001) and diminished PA wall thickening. Echocardiography showed that cerivastatin significantly reduced right ventricle thickening (monocrotaline: 0.34 ± 0.02 cm vs. cerivastatin: 0.26 ± 0.02 cm; P < 0.001) and increased PA acceleration time (monocrotaline: 13.98 ± 1.14 milliseconds vs. cerivastatin: 21.07 ± 2.80 milliseconds; P < 0.001). Nanoliposomal cerivastatin was equally effective or slightly better than cerivastatin in reducing PA pressure (monocrotaline: 67.06 ± 13.64 mm Hg; cerivastatin: 46.31 ± 7.64 mm Hg vs. liposomal cerivastatin: 37.32 ± 9.50 mm Hg) and improving parameters of right ventricular function as measured by increasing PA acceleration time (monocrotaline: 24.68 ± 3.92 milliseconds; cerivastatin: 32.59 ± 6.10 milliseconds vs. liposomal cerivastatin: 34.96 ± 7.51 milliseconds). More importantly, the rate and magnitude of toxic cerivastatin metabolite lactone generation from the intratracheally administered nanoliposomes was significantly lower as compared with intravenously administered free cerivastatin. These studies show that nanoliposome encapsulation improved in vitro and in vivo pharmacologic and safety profile of cerivastatin and may represent a safer approach as a disease-modifying therapy for PAH.