Fully Collapsed Imploded Cryptophanes in Solution and in the Solid State.

Cryptophanes with flexible linkers derived from (±)-tris-(4-formyl-phenyl)-cyclotriguaiacylene with either bisoxydi(ethylamine) or bis(aminopropyl)ether were isolated as single crystals, the crystal structures of which showed the proposed, but previously uncharacterised, out-in conformation, in which both cyclotriguaiacylene fragments adopt a crown conformation with one crown sitting inside the other. The usual cage-like out-out conformation of the cryptophanes was observed when crystals were dissolved upon heating, and the molecules collapsed back to the out-in isomers over time. In contrast, a cryptophane also derived from (±)-tris-(4-formyl-phenyl)-cyclotriguaiacylene but with rigid dibenzalhydrazine linkers was isolated as the more usual out-out isomer.

How does chiral self-sorting take place in the formation of homochiral Pd6L8 capsules consisting of cyclotriveratrylene-based chiral tritopic ligands?

The chiral self-sorting process during the self-assembly of homochiral Pd6L8 capsules from cyclotriveratrylene (CTV)-based chiral tritopic ligands (L) and (Py*: 3-chloropyridine) was investigated by an NMR-based approach (QASAP: quantitative analysis of the self-assembly process). From the beginning to the formation of the immature capsules (ICs), enantiomeric ligands are distributed in the intermediates in a non-self-sorting manner, which leads to the isomers of heterochiral ICs over 99% yield. The mismatch of the chirality in the heterochiral ICs prevents intramolecular ligand exchanges in ICs to form the heterochiral capsules. The correction of the chirality in the heterochiral ICs (chiral self-sorting) takes place very slowly to finally lead to the homochiral capsules. The reason why the chiral self-sorting took place in the late stage of the self-assembly (after the formation of the heterochiral ICs) would be due to the relatively high flexibility of the CTV-based ligand.

M12L8 metallo-supramolecular cube with cyclotriguaiacylene-type ligand: spontaneous resolution of cube and its constituent host ligand.

The racemic ligand (±)-tris-(4-methylthiazolyl)cyclotriguaiacylene forms a homochiral crystalline Ag12L8 cube with spontaneous resolution. The ligand itself likewise crystallises in a chirally pure fashion in two clathrate complexes. Ag12L8 is the first example of a cyclotriguaiacylene-type coordination cube and a rare example of a M12L8-type metallo-cube.

Unexpected Spin-Crossover and a Low-Pressure Phase Change in an Iron(II)/Dipyrazolylpyridine Complex Exhibiting a High-Spin Jahn- Teller Distortion.

The synthesis of 4-methyl-2,6-di(pyrazol-1-yl)pyridine (L) and four salts of [FeL2]X2 (X­ = BF(4)(­), 1; X­ = ClO(4)(­), 2; X­ = PF(6)(­), 3; X­ = CF3SO(3)(­), 4) are reported. Powder samples of 1 and 2 both exhibit abrupt, hysteretic spin-state transitions on cooling, with T(1/2)↓ = 204 and T(1/2)↑ = 209 K (1), and T(1/2)↓ = 175 and T(1/2)↑ = 193 K (2). The 18 K thermal hysteresis loop for 2 is unusually wide for a complex of this type. Single crystal structures of 2 show it to exhibit a Jahn­Teller-distorted six-coordinate geometry in its high-spin state, which would normally inhibit spin-crossover. Bulk samples of 1 and 2 are isostructural by X-ray powder diffraction, and undergo a crystallographic phase change during their spin-transitions. At temperatures below T(1/2), exposing both compounds to 10(­5) Torr pressure inside the powder diffractometer causes a reversible transformation back to the high-temperature crystal phase. Consideration of thermodynamic data implies this cannot be accompanied by a low → high spin-state change, however. Both compounds also exhibit the LIESST effect, with 2 exhibiting an unusually high T(LIESST) of 112 K. The salts 3 and 4 are respectively high-spin and low-spin between 3 and 300 K, with crystalline 3 exhibiting a more pronounced version of the same Jahn­Teller distortion.

Unexpected Spin-Crossover and a Low-Pressure Phase Change in an Iron(II)/Dipyrazolylpyridine Complex Exhibiting a High-Spin Jahn-Teller Distortion.

The synthesis of 4-methyl-2,6-di(pyrazol-1-yl)pyridine (L) and four salts of [FeL2]X2 (X(-) = BF4(-), 1; X(-) = ClO4(-), 2; X(-) = PF6(-), 3; X(-) = CF3SO3(-), 4) are reported. Powder samples of 1 and 2 both exhibit abrupt, hysteretic spin-state transitions on cooling, with T1/2↓ = 204 and T1/2↑ = 209 K (1), and T1/2↓ = 175 and T1/2↑ = 193 K (2). The 18 K thermal hysteresis loop for 2 is unusually wide for a complex of this type. Single crystal structures of 2 show it to exhibit a Jahn-Teller-distorted six-coordinate geometry in its high-spin state, which would normally inhibit spin-crossover. Bulk samples of 1 and 2 are isostructural by X-ray powder diffraction, and undergo a crystallographic phase change during their spin-transitions. At temperatures below T1/2, exposing both compounds to 10(-5) Torr pressure inside the powder diffractometer causes a reversible transformation back to the high-temperature crystal phase. Consideration of thermodynamic data implies this cannot be accompanied by a low → high spin-state change, however. Both compounds also exhibit the LIESST effect, with 2 exhibiting an unusually high T(LIESST) of 112 K. The salts 3 and 4 are respectively high-spin and low-spin between 3 and 300 K, with crystalline 3 exhibiting a more pronounced version of the same Jahn-Teller distortion.

An infinite chainmail of M6L6 metallacycles featuring multiple Borromean links.

Borromean rings or links are topologically complex assemblies of three entangled rings where no two rings are interlinked in a chain-like catenane, yet the three rings cannot be separated. We report here a metallacycle complex whose crystalline network forms the first example of a new class of entanglement. The complex is formed from the self-assembly of CuBr2 with the cyclotriveratrylene-scaffold ligand (±)-tris(iso-nicotinoyl)cyclotriguaiacylene. Individual metallacycles are interwoven into a two-dimensional chainmail network where each metallacycle exhibits multiple Borromean-ring-like associations with its neighbours. This only occurs in the solid state, and also represents the first example of a crystalline infinite chainmail two-dimensional network. Crystals of the complex were twinned and have an unusual hollow tubular morphology that is likely to result from a localized dissolution-recrystallization process.

Copper coordination polymers from cavitand ligands: hierarchical spaces from cage and capsule motifs, and other topologies.

The cyclotriveratrylene-type ligands (±)-tris(iso-nicotinoyl)cyclotriguaiacylene L1 (±)-tris(4-pyridylmethyl)cyclotriguaiacylene L2 and (±)-tris{4-(4-pyridyl)benzyl}cyclotriguaiacylene L3 all feature 4-pyridyl donor groups and all form coordination polymers with CuI and/or CuII cations that show a remarkable range of framework topologies and structures. Complex [CuI4CuII1.5(L1)3(CN)6]·CN·n(DMF) 1 features a novel 3,4-connected framework of cyano-linked hexagonal metallo-cages. In complexes [Cu3(L2)4(H2O)3]·6(OTf)·n(DMSO) 2 and [Cu2(L3)2Br2(H2O)(DMSO)]·2Br·n(DMSO) 3 capsule-like metallo-cryptophane motifs are formed which linked through their metal vertices into a hexagonal 2D network of (43.123)(42.122) topology or a coordination chain. Complex [Cu2(L1)2(OTf)2(NMP)2(H2O)2]·2(OTf)·2NMP 4 has an interpenetrating 2D 3,4-connected framework of (4.62.8)(62.8)(4.62.82) topology with tubular channels. Complex [Cu(L1)(NCMe)]·BF4·2(CH3CN)·H2O 5 features a 2D network of 63 topology while the CuII analogue [Cu2(L1)2(NMP)(H2O)]·4BF4·12NMP·1.5H2O 6 has an interpenetrating (10,3)-b type structure and complex [Cu2(L2)2Br3(DMSO)]·Br·n(DMSO) 7 has a 2D network of 4.82 topology. Strategies for formation of coordination polymers with hierarchical spaces emerge in this work and complex 2 is shown to absorb fullerene-C60 through soaking the crystals in a toluene solution.

Biologically compatible, phosphorescent dimetallic rhenium complexes linked through functionalized alkyl chains: syntheses, spectroscopic properties, and applications in imaging microscopy.

A range of luminescent, dimetallic complexes based upon the rhenium fac-tricarbonyl diimine core, linked by aliphatic chains of varying lengths and functionality, have been synthesized and their photophysical properties examined. Each complex displays characteristic (3)M(Re)L(diimine)CT emission in aerated acetonitrile solution, with long lifetimes in the range of 129-248 ns and corresponding quantum yields in the range 3.2-8.0%. In aqueous solution, as opposed to acetonitrile, the complexes generally show a small hypsochromic shift in λ(em) and an extension of the (3)MLCT lifetime, attributed to a hydrophobically driven association of the alkyl chains with the rhenium-bound diimine units. In live cell imaging experiments using MCF7 cells the complexes all show good uptake by non-energy dependent mechanisms without endosomal entrainment, and with varying propensity to localize in organelles. The degrees of uptake and localization properties are discussed in terms of the length and chemical nature of the linkers, and in terms of the likely interactions between these and the various cellular components encountered.

Complexes in context: attempting to control the cellular uptake and localisation of rhenium fac-tricarbonyl polypyridyl complexes.

Transition metal lumophores are now well established as agents for cell imaging, but we are still not able to predict generally and with confidence their cellular localisation, or, for that matter, their uptake efficiencies. While many such complexes have been shown to illuminate cells, genuine applications in biomedical research will only be developed when their uptake and localisation are better understood. This perspective is not a comprehensive review of luminescence, but is an overview of attempts to control uptake and localisation, focussing on a personal account of this group's development of imaging agents based on the Re(CO)(3) bipyridine core, and our attempts to understand and control their cellular behaviour.

A 'Sleeping Trojan Horse' which transports metal ions into cells, localises in nucleoli, and has potential for bimodal fluorescence/PET imaging.

A rhenium polypyridine-based molecular vessel is membrane impermeant when empty, but, upon loading with metal ions, the cationic form is taken up by MCF-7 cells, localising in nucleoli. The luminescence of the vessel and its copper binding ability suggest potential as a bimodal fluorescence/PET imaging agent.

Multimodal radio- (PET/SPECT) and fluorescence imaging agents based on metallo-radioisotopes: current applications and prospects for development of new agents.

This perspective focuses on complexes of radioactive metal ions applied in multimodal radio- and optical imaging. The application of metal ions in radioimaging techniques such as Positron Emission Tomography (PET) and Single Photon Emission Computed Tomography (SPECT) has advantages over lighter nuclei in terms of half-life, but there are particular issues related to their speciation (particularly leaching from complexes) and with the combination of certain ions with fluorescent systems. The basic coordination chemistry of the ions involved and issues relating to biological conditions and their compatibility with optical imaging techniques are reviewed, the current literature presented in context, and the prospect of exploiting the intrinsic luminescence of certain metal-ligand complexes is discussed.

Uptake and localisation of rhenium fac-tricarbonyl polypyridyls in fluorescent cell imaging experiments.

The synthesis of a series of rhenium fac tricarbonyl bisimine complexes and their application as lumophores in fluorescence imaging of yeast and human adenocarcinoma cells is reported. A wide range of complexes are synthesised with varying charges and lipophilicities, all of which have photophysical properties which make them suitable as cell imaging agents. After attempts to apply these as imaging agents in various strains of yeast which showed limited uptake, an investigation was undertaken of their applications as imaging agents in mammalian cells. In general the uptake was high and short-term toxicity and photobleaching appear to be low. The patterns of uptake and localisation are correlated with structural and electronic features of the complexes in an attempt to establish ground-rules for the design and application of rhenium complexes in imaging of eukaryotes.

Fluxionality and lability in rhenium 4'-hydroxyterpyridine complexes: evidence for an associative mechanism and correlated fluxionality and lability.

The complexes [ReX(CO)(3)(N,N-eta(2)-4'-hydroxy-2-2',6'-2''-terpyridine)] (X = Cl,Br,I) have been synthesised and their ligand exchange reactions and fluxionality of the terpyridine unit studied. The halides are far more labile in these species than in analogous bipyridines, and it is proposed that the ligand fluxionality is involved in this reactivity. Structural studies of the family are reported along with spectroscopic studies including variable temperature NMR which is used to demonstrate a negative entropy of activation for the fluxional process. Synthesis of an analogue which is incapable of fluxional behaviour confirms the link between fluxionality and lability in these complexes.

Application of d6 transition metal complexes in fluorescence cell imaging.

Luminescent d(6) transition metal complexes have often been proposed as useful fluorophores for cell imaging due to their attractive photophysical attributes, but until very recently their actual applications have been scarce, and largely limited to ruthenium complexes in DNA and oxygen sensing. In the last few years, however, there has been an increasing number of reports of the design and application in cellular studies of a diverse range of Ir, Re and Ru complexes tailor-made for imaging applications. The design principles, uptake and cellular localisation of this new class of imaging agents are presented in context in this feature article.

The coordination chemistry of fluorescent pyridinyl- and quinolinyl-phthalimide ligands with the {Au(I)-PPh(3)} cationic unit.

The new mono-dentate ligands, 2-(2-aminoethyl)-N-phthalimido-pyridine () and 8-amino-N-phthalimido-quinoline (), were synthesised using a solvent-free melt method. These ligands together with (3-amino-N-phthalimido-pyridine; 3-aminomethyl-N-phthalimido-pyridine; 4-aminomethyl-N-phthalimido-pyridine; 3-amino-N-phthalimido-quinoline) were then used to access six luminescent Au(I) complexes of the generic type {Ph(3)P-Au-L(n)}(OTf). X-Ray crystallography has been used to structurally characterise three of the complexes showing that in the cases of and the complexes adopt an approximately linear P-Au-N coordination geometry. However, in the case of the sterically demanding the structure shows distortions within the ligand and deviations from a linear coordination geometry. Solution state (1)H and (31)P{(1)H} NMR confirmed that the proposed formulations and coordination modes exist in solution. At room temperature the photophysical studies showed that the emission from each of the six complexes was in the visible region (395-475 nm) and assigned to a ligand-centred fluorescence (tau < 10 ns) in each case.

A rhenium tricarbonyl 4'-oxo-terpy trimer as a luminescent molecular vessel with a removable silver stopper.

Shining metal cups: A luminescent tube of triangular cross-section and stoppered by a silver ion (see picture: Re yellow, N blue, O red) is formed in two steps from commercial materials. The silver ion can be removed to give a tube, and both species are potential hosts for small ions and molecules; a change in luminescence is triggered by the encapsulation of silver.