How wound environments trigger the release from Rifampicin-loaded liposomes.

BACKGROUND: Chronic wounds often contain high levels of proinflammatory cytokines that prolong the wound-healing process. Patients suffering from these conditions are likely to benefit from topical rifampicin therapy. Although recent research indicates considerable anti-inflammatory properties of the antibiotic, currently, there are no commercial topical wound healing products available. To address this medical need, a liposomal drug delivery system was developed. A mechanistic investigation outlined major influences of wound environments that affect the release kinetics and, as a consequence, local bioavailability. METHODS: Liposomes were prepared using the thin-film hydration method and subsequently freeze-dried at the pilot scale to improve their stability. We investigated the influence of oxidation, plasma proteins, and lipolysis on the in vitro release of rifampicin and its two main degradation products using the Dispersion Releaser technology. A novel simulated wound fluid provided a standardized environment to study critical influences on the release. It reflects the pathophysiological environment regarding pH, buffer capacity, and protein content. RESULTS: During storage, the liposomes efficiently protect rifampicin from degradation. After the dispersion of the vesicles in simulated wound fluid, despite the significant albumin binding (>70%), proteins have no considerable effect on the release. Also, the presence of lipase at pathophysiologically elevated concentrations did not trigger the liberation of rifampicin. Surprisingly, the oxidative environment of the wound bed represents the strongest accelerating influence and triggers the release. CONCLUSION: A stable topical delivery system of rifampicin has been developed. Once the formulation comes in contact with simulated wound fluid, drug oxidation accelerates the release. The influence of lipases that are assumed to trigger the liberation from liposomes depends on the drug-to-lipid ratio. Considering that inflamed tissues exhibit elevated levels of oxidative stress, the trigger mechanism identified for rifampicin contributes to targeted drug delivery.

AGMO Inhibitor Reduces 3T3-L1 Adipogenesis.

Alkylglycerol monooxygenase (AGMO) is a tetrahydrobiopterin (BH4)-dependent enzyme with major expression in the liver and white adipose tissue that cleaves alkyl ether glycerolipids. The present study describes the disclosure and biological characterization of a candidate compound (Cp6), which inhibits AGMO with an IC50 of 30-100 µM and 5-20-fold preference of AGMO relative to other BH4-dependent enzymes, i.e., phenylalanine-hydroxylase and nitric oxide synthase. The viability and metabolic activity of mouse 3T3-L1 fibroblasts, HepG2 human hepatocytes and mouse RAW264.7 macrophages were not affected up to 10-fold of the IC50. However, Cp6 reversibly inhibited the differentiation of 3T3-L1 cells towards adipocytes, in which AGMO expression was upregulated upon differentiation. Cp6 reduced the accumulation of lipid droplets in adipocytes upon differentiation and in HepG2 cells exposed to free fatty acids. Cp6 also inhibited IL-4-driven differentiation of RAW264.7 macrophages towards M2-like macrophages, which serve as adipocyte progenitors in adipose tissue. Collectively, the data suggest that pharmacologic AGMO inhibition may affect lipid storage.

Sustained-release hot melt extrudates of the weak acid TMP-001: A case study using PBB modelling.

Over the last 30 years, hot melt extrusion has become a leading technology in the manufacture of amorphous drug delivery systems. Mostly applied as an 'enabling formulation' for poorly soluble compounds, application in the design of sustained-release formulations increasingly attracts the attention of the pharmaceutical industry. The drug candidate TMP-001 is currently under evaluation for the early treatment of Multiple Sclerosis. Although this weak acid falls into class II of the Biopharmaceutics Classification System, the compound exhibits high solubility in the upper intestine resulting in high peroral bioavailability. In the present studies, four different formulation prototypes varying in their sustained-release behavior were developed, using L-arginine as a pore-forming agent in concentrations ranging between 0 and 20%. Initially, biorelevant release testing was applied to assess the dissolution behavior of the prototypes. For these formulations, a total drug release of 44.7%, 64.6%, 75%, and 90.5% was achieved in FaSSIF-v2 after 24 h. Two candidates were selected for further characterization considering the crystal structure and the physical stability of the amorphous state of TMP-001 in the formulations together with the release behavior in Level II biorelevant media. Our findings indicate L-arginine as a valuable excipient in the formulation of hot melt extrudates, as its presence led to a considerable stabilization of the amorphous state and favorably impacted the milling process and release behavior of TMP-001. To properly evaluate the proposed formulations and the importance of colonic dissolution and absorption on the overall bioavailability, a physiologically-based biopharmaceutics model was used.

Predicting the environmental emissions arising from conventional and nanotechnology-related pharmaceutical drug products.

Today, environmental pollution with pharmaceutical drugs and their metabolites poses a major threat to the aquatic ecosystems. Active substances such as fenofibrate, are processed to pharmaceutical drug formulations before they are degraded by the human body and released into the wastewater. Compared to the conventional product Lipidil® 200, the pharmaceutical product Lipidil 145 One® and Ecocaps take advantage of nanotechnology to improve uptake and bioavailability of the drug in humans. In the present approach, a combination of in vitro drug release studies and physiologically-based biopharmaceutics modeling was applied to calculate the emission of three formulations of fenofibrate (Lipidil® 200, Lipidil 145 One®, Ecocaps) into the environment. Special attention was paid to the metabolized and non-metabolized fractions and their individual toxicity, as well as to the emission of nanomaterials. The fish embryo toxicity test revealed a lower aquatic toxicity for the metabolite fenofibric acid and therefore an improved toxicity profile. When using the microparticle formulation Lipidil® 200, an amount of 126 mg of non-metabolized fenofibrate was emitted to the environment. Less than 0.05% of the particles were in the lower nanosize range. For the nanotechnology-related product Lipidil 145 One®, the total drug emission was reduced by 27.5% with a nanomaterial fraction of approximately 0.5%. In comparison, the formulation prototype Ecocaps reduced the emission of fenofibrate by 42.5% without any nanomaterials entering the environment. In a streamlined life cycle assessment, the lowered dose in combination with a lowered drug-to-metabolite ratio observed for Ecocaps led to a reduction of the full life cycle impacts of fenofibrate with a reduction of 18% reduction in the global warming potential, 61% in ecotoxicity, and 15% in human toxicity. The integrated environmental assessment framework highlights the outstanding potential of advanced modeling technologies to determine environmental impacts of pharmaceuticals during early drug development using preclinical in vitro data.

A sensitive in vitro performance assay reveals the in vivo drug release mechanisms of long-acting medroxyprogesterone acetate microparticles.

Today, a growing number of subcutaneously administered depot formulations enable continuous delivery of poorly soluble compounds over a longer time period. The modified liberation is considered to be a rate-limiting step in drug absorption and thus impacts therapeutic efficacy and product safety. In the present approach, a mechanism-based pharmacokinetic model of the commercial microparticle formulation depo-subQ provera 104™ (Sauter mean diameter of 5.08 ± 1.63 µm) was established. The model was verified using human pharmacokinetic data from three different clinical trials. Further, the effects of drug release, injection site and patient population on the pharmacokinetic profile were investigated. For this purpose, the drug release was assessed using the novel dispersion releaser technology, whereby a biorelevant medium reflecting major characteristics of the subcutaneous tissue (including ion background, buffer capacity and protein concentration) was used. The established model provided an effective prediction of the key pharmacokinetic parameters, including Cmax, Tmax and AUCall. Only in presence of 55% of fetal bovine serum (using a novel simulated subcutaneous interstitial fluid), the release assay was capable to discriminate between microparticles before and after storage.

Predicting human pharmacokinetics of liposomal temoporfin using a hybrid in silico model.

Over the years, the performance of the liposomal formulations of temoporfin, Foslip® and Fospeg®, was investigated in a broad array of cell-based assays and preclinical animal models. So far, little attention has been paid to the influence of drug release and liposomal stability on the plasma concentration-time profile. The drug release is a key attribute which impacts product quality and the in vivo efficacy of nanocarrier formulations. In the present approach, the in vitro drug release and the drug-protein transfer of Foslip® and Fospeg® was determined using the dispersion releaser technology. To analyze the stability of both formulations in physiological fluids, nanoparticle tracking analysis was applied. A comparable drug release behavior and a high physical stability with a vesicle size of approximately 92 ± 2 nm for Foslip® and at 111 ± 5 nm for Fospeg® were measured. The development of a novel hybrid in silico model resulted in an optimal representation of the in vivo data. Based on the information available for previous formulations, the model enabled a prediction of the performance of Foslip® in humans. To verify the simulations, plasma concentration-time profiles of a phase I clinical trial were used. An absolute average fold error of 1.4 was achieved. Moreover, a deconvolution of the pharmacokinetic profile into different fractions relevant for the in vivo efficacy and safety was achieved. While the total plasma concentration reached a cmax of 2298 ng/mL after 0.72 h, the monomolecular drug accounted for a small fraction of the photosensitizer with a cmax of 321 ng/mL only.

A dialysis-based in vitro drug release assay to study dynamics of the drug-protein transfer of temoporfin liposomes.

Today, a growing number of nanotherapeutics is utilized to deliver poorly soluble compounds using the intravenous route of administration. The drug release and the direct transfer of the active pharmaceutical ingredient to serum proteins plays an important role in bioavailability and accumulation of the drug at the target site. It is closely related to the formation of a protein corona as well as the plasma protein binding of the compound. In the present study, two in vitro drug release methods, the flow-through cell and the dispersion releaser technology, were evaluated with regards to their capability to measure a time-resolved profile of the serum protein binding. In this context, the photosensitizer temoporfin and temoporfin-loaded liposomes were tested. While in the fine capillaries of the flow-through cell a rapid agglomeration of proteins occurred, the dispersion releaser technology in combination with the four-step model enabled the measurement of the transfer of drugs from liposomes to proteins. In presence of 10% of fetal calf serum approximately 20% of the model compound temoporfin were bound to serum proteins within the first 3 h. At higher serum concentration this binding remained stable for approximately 10 h.

Advanced in silico modeling explains pharmacokinetics and biodistribution of temoporfin nanocrystals in humans.

Foscan®, a formulation comprising temoporfin dissolved in a mixture of ethanol and propylene glycol, has been approved in Europe for palliative photodynamic therapy of squamous cell carcinoma of the head and neck. During clinical and preclinical studies it was observed that considering the administration route, the drug presents a rather atypical plasma profile as plasma concentration peaks delayed. Possible explanations, as for example the formation of a drug depot or aggregation after intravenous administration, are discussed in current literature. In the present study an advanced in silico model was developed and evaluated for the detailed description of Foscan® pharmacokinetics. Therefore, in vitro release data obtained from experiments with the dispersion releaser technology investigating dissolution pressures of various release media on the drug as well as in vivo data obtained from a clinical study were included into the in silico models. Furthermore, precipitation experiments were performed in presence of biorelevant media and precipitates were analyzed by nanoparticle tracking analysis. Size analysis and particle fraction were also incorporated in this model and a sensitivity analysis was performed. An optimal description of the in vivo situation based on in vitro release and particle characterization data was achieved, as demonstrated by an absolute average fold error of 1.21. This in vitro-in vivo correlation provides an explanation for the pharmacokinetics of Foscan® in humans.

Predictive PBPK modeling as a tool in the formulation of the drug candidate TMP-001.

Since many drugs in the therapy scheme of multiple sclerosis (MS) are applied parenterally with significant side effects, oral treatment is the most accepted therapy option for chronic diseases like MS. The drug candidate TMP-001, which has disease-modifying properties, can be applied orally. Beside other symptoms, swallowing disorders have a major impact not only on the health status and quality of life of MS patients, but also impede reliable drug therapy. Consequently, the development of an easy-to-swallow liquid oral dosage form supported by a combined PBPK-IVIVC model was approached. In this context, the impact of formulation parameters was studied. Biorelevant in vitro drug release studies resulted in an almost complete release of 96.91% ±â€¯1.00% in the intestine which was translated to rapidly increasing in silico plasma profiles. The predictions were compared to the outcome of a phase I clinical trial. A partial parameter sensitivity analysis of the in silico model deepened our understanding of the physiological processes underlying human pharmacokinetics.

A comparison of two biorelevant in vitro drug release methods for nanotherapeutics based on advanced physiologically-based pharmacokinetic modelling.

As a growing number of nanotherapeutics enters the market, improved analytical techniques for measuring the drug release are required. Biorelevant release tests have become a standard in the prediction of in vivo pharmacokinetics but also in quality control of novel dosage forms. In the present study, two methods for testing the drug release from nanocarriers, namely the filtration technique and the dispersion releaser technology, have been investigated. Initially, the in vitro release rates were determined using two different biorelevant media. Additionally, the effect of each method on a simulated in vivo pharmacokinetic profile was studied using advanced PBPK modelling. The two methods resulted in slightly different release profiles. Applying the filtration method, an early plateau of 91.0 ±â€¯5.3% was reached at the first sampling time point. In comparison, the release rate steadily increased to a maximum of 100.9 ±â€¯4.1% when the dispersion releaser technology was used. Sensitivity analysis revealed how these differences translated into the PBPK-based simulation. A change in the total dissolution rate of 10% resulted in cmax values of +1.6% and -11.0%, respectively, when using input data obtained with the dispersion releaser. Data obtained by filtration translated into cmax values of ±1.8%.